6 Solutions to Unlock Xiaomi Phones If You Forgot Password, PIN, Pattern

Too many times, we forget the passcode of our smartphones, only to regret it later. Don’t worry if you are facing the same issue. It happens to all of us at times. Fortunately, there are many ways to unlock an Android device even when you have forgotten its password/pin/pattern lock. This guide will teach you how to unlock Xiaomi phones if you forgot the password in five different ways. Read on and choose your preferred option if you forgot the password on your Xiaomi phone and move past every setback you face.

Solution 1: Unlock Xiaomi Phone using Dr.Fone - Screen Unlock (5 mins solution)

Among all the solutions we are going to introduce in this article, this is the easiest one. Dr.Fone - Screen Unlock (Android) can help you remove the lock screen of some Xiaomi and Samsung devices without any data loss. After the lock screen is removed, the phone will work like it’s never been locked before, and all your data are there. Besides, you can use this tool to bypass the passcode on other Android phones, such as Huawei, Lenovo, Oneplus, etc. The only defect of Dr.Fone is that it will erase all the data beyond Samsung and Xiaomi after unlocking.

Dr.Fone - Screen Unlock (Android)

Get into the Locked Xiaomi Phone within Minutes

• Available for most Xiaomi series, like LG/LG2/LG3/G4, etc.
• Except for Xiaomi phones, it unlocks 20,000+ models of Android phones & tablets.
• Everybody can handle it without any technical background.
• Offer customized removal solutions to promise good success rate.

4,008,669 people have downloaded it

How to unlock an Xiaomi phone with Dr.Fone - Screen Unlock (Android)?

Step 1. Launch Dr.Fone.

Download Dr.Fone from the download buttons above. Install and launch it on your computer. Then select the “Screen Unlock“ function.

Step 2. Connect your phone.

Connect your Xiaomi phone to the computer using a USB cable. Click on Unlock Android Screen on Dr.Fone.

Step 3. Select the phone model.

Currently, Dr.Fone supports removing lock screens on some Xiaomi and Samsung devices without data loss. Select the correct phone model information from the dropdown list.

Step 4. Boot the phone in download mode.

• Disconnect your Xiaomi phone and power it off.
• Press the Power Up button. While you are holding the Power Up button, plug in the USB cable.
• Keep pressing the Power Up button until the Download Mode appears.

Step 5. Remove the lock screen.

After your phone boot in download mode, click on Remove to start to remove the lock screen. This process only takes a few minutes. Then your phone will restart in normal mode without any lock screen.

For more detailed steps, please go to our guide on unlocking Android phones with/without data loss .

Solution 2: Unlock the Xiaomi Phone Using Android Device Manager (Need a Google account)

This is probably the most convenient solution to set up a new lock for your Xiaomi device. With Android Device Manager, you can locate your device, ring it, erase its data, and even change its lock remotely. All you got to do is log in to the Xiaomi 14 Ultra device Manager account using the credentials of your Google Account. Needless to say, your Xiaomi phone should be linked to your Google Account. Learn how to unlock the Xiaomi phone if forgot your password using Android Device Manager.

• Step 1. Start by logging in to Android Device Manager by entering the credentials of your respective Google Account that is configured with your phone.

• Step 2. Select your device’s icon to get access to various features like ring, lock, erase, and more. Out of all the provided options, click on “lock” to change the security lock of your device.

• Step 3. Now, a new pop-up window will open. Here, provide the new password for your device, confirm it, and click on the “lock” button again to save these changes.

That’s it! Your phone will reset its password, and you would be able to move past any problem related to forgetting the password on the Xiaomi phone using Android Device Manager unlock .

Solution 3: Unlock the Xiaomi Phone Using Google Login (only Android 4.4 and below)

If your Xiaomi device runs on Android 4.4 and previous versions, then you can easily move past the password/pattern lock without any trouble. The provision is not available on devices, which run on newer versions of Android. Nevertheless, for all the Xiaomi 14 Ultra devices running on older versions than Android 4.4, this is undoubtedly the easiest way to set a new passcode. Follow these steps to learn how to unlock your Xiaomi phone if you forgot your password using your Google credentials.

• Step 1. Try bypassing the pattern lock at least 5 times. After all the failed attempts, you will get the option to either make an emergency call or choose the option of “Forget pattern”.

• Step 2. Select the “Forget pattern” option and provide the correct credentials of your Google account to unlock your phone.

Solution 4: Unlock the Xiaomi Phone Using Custom Recovery (SD card needed)

If your phone has a removable SD card, you can also try this technique to disable the pattern/password on your device. Though, you need to have some custom recovery installed on your device for this method. You can always go for TWRP (Team Win Recovery Project) and flash it on your device.

TWRP: https://twrp.me/

Also, since you can’t move anything to your device when it is locked, you need to do the same using its SD card. After ensuring that you have met all the basic prerequisites, follow these steps and learn how to unlock the Xiaomi phone’s forgotten password using a custom recovery.

• Step 1. Download a Pattern Password Disable application and save its ZIP file on your computer. Now, insert your SD card into your system and move the recently downloaded file to it.

• Step 2. Reboot your phone into recovery mode. For instance, the TWRP recovery mode can be turned on by simultaneously pressing the Power, Home, and Volume Up button. You would get different options on your screen after entering the custom recovery mode. Tap on “Install” and browse the Pattern Password Disable application file.

• Step 3. Install the above-mentioned application and wait for a few minutes. Afterward, restart your Xiaomi phone. Ideally, your phone will be restarted without any lock screen. If you get a lock screen, you can bypass it by entering any random digits.

Solution 5: Factory Reset Xiaomi Phone in Recovery Mode (erases all phone data)

If none of the above-mentioned alternatives work, then you can also try to factory reset your device. This will erase every kind of data from your device and make it look brand new by resetting it. Though, you can easily resolve the forgot password on the Xiaomi phone with it. Therefore, before proceeding, you need to be familiar with all the repercussions of performing a factory reset. All you got to do is follow these steps.

• Step 1. Put your Xiaomi phone on its recovery mode with correct key combinations. To do this, firstly, turn your device off and let it rest for a few seconds. Now, press the Power and Volume Down key at the same time. Keep pressing them until you see LG’s logo on the screen. Release the buttons for a few seconds and press them again at the same time. Again, keep pressing the buttons until you see the recovery mode menu. This technique works with most Xiaomi devices, but it can differ slightly from one model to another.

• Step 2. Choose “Wipe Data/Factory Reset.” You can use the Volume up and down key to navigate the options and the power/home key to select anything. Use these keys and select the “Wipe Data/Factory Reset” option. You might get another pop-up asking to delete all user data. Just agree it reset your device. Sit back and relax as your device will perform a hard reset.

• Step 3. Select the “Reboot system now” option to restart it. Your phone will be restarted without any lock screen.

Click here


After following these steps, you can easily overcome how to unlock the Xiaomi phone forgot password issue.

Solution 6: Unlock Xiaomi Phone Using ADB Command (need USB debugging enabled)

This might be a little complicated initially, but if you don’t want to follow either of the above-mentioned techniques to unlock your device, you can go with this alternative. Before proceeding, make sure that you have ADB (Android Debug Bridge) installed on your computer. If you don’t have it, then you can download Android SDK right here .

Additionally, it would help if you turned on the USB Debugging feature on your phone before you forgot the password. If USB debugging is not turned on before, then this method will not work for you.

After making your device ready and downloading all the essential software on your computer, follow these steps to learn how to unlock your Xiaomi phone if you forgot the password.

• Step 1. Connect your device to the computer with a USB cable and open the command prompt when it is successfully connected. If you get a pop-up message regarding USB Debugging permission on your device, simply agree to it and continue.

• Step 2. Now, please provide the following code on the command prompt and reboot your device when it is processed. If you want, you can also tweak the code a little and provide a new lock pin.

• ADB shell

• cd /data/data/com.android.providers.settings/databases

• _sqlite3 settings._db

• update system set value=0 where name=’lock_pattern_autolock’;

• update system set value=0 where name=’lockscreen.lockedoutpermanently’;

• .quit

• Step 3. If the above code doesn’t work, try providing the code “ADB _shell rm /data/system/gesture. the key_” to it and follow the same drill.

• Step 4. After restarting your device, if you still get a lock screen, then give a random password to bypass it.

Conclusion

You can choose a preferred option and rectify the issue whenever you forgot the password on the Xiaomi phone . Make sure that you meet all the requirements and go through the respective tutorial to attain fruitful results.

Top 12 Prominent Xiaomi 14 Ultra Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Xiaomi 14 Ultra can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Xiaomi 14 Ultra fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Xiaomi 14 Ultra device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Xiaomi 14 Ultra device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Xiaomi 14 Ultra device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Xiaomi 14 Ultra device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Xiaomi 14 Ultra device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Xiaomi 14 Ultra fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Xiaomi 14 Ultra device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Xiaomi 14 Ultra device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Xiaomi 14 Ultra device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Xiaomi 14 Ultra fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Xiaomi 14 Ultra device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Xiaomi 14 Ultra device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Xiaomi 14 Ultra fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Xiaomi 14 Ultra .

How To Unlock a Xiaomi 14 Ultra Easily?

The Xiaomi series has made a significant splash in the smartphone market. It captivated users with its blend of innovative features and sleek design. The Xiaomi 14 Ultra have recently been the go-to choice for people following the phone series. If you’re a proud owner of Xiaomi 14 Ultra , this guide is your go-to reference for unlocking the full potential of your device.

It will cover various ways toperform a Xiaomi 14 Ultra unlock, no matter the context of what you need unlocking for. This ensures you can enjoy every aspect of your shiny new Pixel to the fullest. Whether you’re a tech enthusiast or a casual user, these tips and tricks will help you master your Xiaomi device.

Part 1: Ways That Xiaomi Lets You Unlock Your Xiaomi 14 Ultra

Xiaomi 14 Ultra are more than just smartphones; they are gateways to a personalized and secure user experience. To access the myriad of features these devices offer, Google provides several unlocking methods, ensuring both convenience and security. Here are these options:

• A Personal Identification Number (PIN) is a simple yet effective way to secure your phone. It’s a numeric code that you enter on the lock screen. Setting up a PIN is straightforward via the Xiaomi 14 Ultra device’s security settings, and unlocking your phone is as easy as tapping in the correct sequence of numbers.
• Similar to a PIN but potentially more secure due to the allowance of a longer combination of numbers and letters. A passcode is ideal for those who seek an extra layer of security. You set it up in the security settings and use it to unlock your phone just like a PIN but with the added complexity of alphanumeric characters.
• Face Unlock.Pixel’s Face Unlock uses advanced facial recognition software. It scans your face to grant access, offering a hands-free and quick way to unlock your Pixel. This feature can be activated in the security settings and requires a simple glance at your phone to unlock.

• Fingerprint Unlock. This method uses your unique fingerprint as a key. It’s fast, secure, and convenient. The Pixel 6a, 6, and 7 fingerprint scanners are actually under the display. Register your fingerprint in the settings, then touch the sensor to gain access.
• Pattern. If you prefer a more visual method, the pattern locklets you draw a specific shape or pattern on the screen to unlock your phone. It’s a fun and interactive way to secure your device. Create your pattern in the security settings, and unlock your phone by replicating it on the lock screen.

In essence, each unlocking method offered by the Xiaomi 14 Ultra provides a blend of security and ease. Whichever unlocking method you prefer, Google ensures that accessing your phone is secure and convenient. All you need to do is set up your preferred method in the Xiaomi 14 Ultra device’s settings and use it to unlock your phone.

Part 2: What To Do if You Forgot Your Screen Unlock Method

Forgetting the screen unlock method on your Xiaomi 14 Ultra , whether it’s a PIN, passcode, pattern, or encountering face or fingerprint recognition issues, can be a frustrating experience. Fortunately, there are methods to regain access to your device. This section will show you your options, from third-party tools to other methods like Safe Mode and force resetting.

Learn different ways to unlock a Xiaomi 14 Ultra, from forgotten screen locks here.

Method 1: Wondershare Dr.Fone

Wondershare Dr.Fone is a comprehensive software suite that manages various aspects of your mobile device. It’s especially renowned for its ability to address common smartphone issues, including forgotten screen unlocks.

Dr.Fone offers a range of features, including data recovery, data transfer between devices, backup and restore functions, and a screen unlock feature. The Screen Unlock feature of Dr.Fone stands out for its ability to bypass your Xiaomi’s screen lock without losing data. It supports PIN, pattern, password, fingerprint, and face lock.

To do this, perform the steps below:

• Step 1: Download and install Dr.Fone on your computer. Then, connect your Pixel phone to it with a cable.

Step 2: Go to Toolbox > Screen Unlock. Then, use a connector to connect your Pixel device to the PC.

• Step 3: Select Android on this page.

• Step 4: Choose Unlock Android Screen, and select your phone’s brand (Google) in the following brand list.

• Step 5: Now, choose Remove without Data Loss.

• Step 6: Ensure the correctness of your device details. Then, type in “000000” to proceed.

• Step 7: Follow on-screen instructions to put your device into download mode.

• Step 8: Click Done after the process has finished.

Tips: Is your Pixel locked accidently? Are you searching for a powerful tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Method 2: Entering Into Safe Mode

Safe Mode is a diagnostic mode in Android that can help bypass third-party lock screen apps. It’s useful if you’ve used a third-party app for your lock screen.

To do this, press the power button, then long-press on the Power off option. Tap OK when Reboot to safe mode option appears. In Safe Mode, third-party apps are disabled. Thus, you can now access your device if a third-party app is causing lock issues.

Method 3: Force Resetting a Device/Flashing a New ROM

Force resetting or flashing a new ROM can be considered a last resort. They involve erasing all data on your device or installing a new operating system.

• Force resetting your device. To force reset your Xiaomi, press and hold the Power and Volume Down buttons simultaneously to enter recovery mode. Use the volume buttons to navigate to Wipe data/factory resetand select it with the power button. This will get rid of existing password locks.
• Flashing a new ROM. This is more complex and typically requires downloading a new firmware and flashing tool. It’s only recommended for advanced users or as a last resort.

Remember, while these methods can effectively unlock your device, they also come with risks. Always back up your data regularly, and use these methods responsibly, considering their potential to erase your data or affect your device’s warranty.

Bonus: How To Perform a SIM Unlock on Xiaomi

Unlocking the SIM on your Xiaomi, particularly the Xiaomi 14 Ultra , opens up a world of flexibility, especially for those who frequently travel or wish to switch carriers. This process can be accomplished for free through your carrier, provided certain conditions are met. Dive into the steps and considerations for performing a SIM unlock on your Xiaomi.

Understanding the Prerequisites

Before proceeding with the SIM unlock, ensure you’re in good standing with your carrier. This means:

• No outstanding bills.
• Your contract for the phone has expired.
• The device has been in your possession for at least 60-90 days.

Different carriers have varying requirements for a SIM unlock, so your first move should be to contact them for specific details.

Steps for SIM Unlock Through Your Carrier

Here are the steps to SIM unlock your Xiaomi 14 Ultra,These generally involve the following steps but are still subject to the official instructions of your carrier:

• Step 1: Open the Phone app and dial *#06# on your Xiaomi. This will display your phone’s IMEI number. Note this number down for future reference.
• Step 2: Call your carrier and request a SIM unlock code. You’ll likely need to provide your Xiaomi’s IMEI number.
• Step 3: If you meet your carrier’s requirements, they will email you the SIM unlock code within 2-5 days.
• Step 4: Once you receive the code, replace your current SIM with one from a different carrier. When prompted, enter the SIM unlock code you received via email.

Alternative Method: Android SIM Unlock

If your carrier cannot unlock your Xiaomi 14 Ultra ’s SIM, or if you prefer a quicker solution, consider using network unlocking services. This may be websites like UnlockBase, Mobile Unlocks, etc.

This generally involves the following steps:

• Step 1: Like the previous method, retrieve your IMEI number by dialing *#06# on your Pixel.
• Step 2: Go to the Android SIM unlock provider’s website and enter your device’s IMEI number.
• Step 3: Follow through with the checkout process, providing payment and contact information.
• Step 4: Once the payment is processed, you’ll receive the unlock code via SMS or email. Insert a SIM from a different carrier into your Pixel, then enter the received unlock code when prompted.

By following these steps, you can successfully unlock the SIM of your Xiaomi device, ensuring you can enjoy your phone with the carrier of your choice, wherever your travels may take you.

Important Considerations

Remember, unlocking the SIM doesn’t absolve you from your carrier contract. You’re still obligated to make timely payments as per your agreement. The primary advantage of unlocking your SIM is the freedom to use your Xiaomi 14 Ultra with any carrier’s SIM card, offering greater flexibility and control over your mobile experience. Thus, it is encouraged not to do anything illegal to avoid future complications.

Conclusion

This article explored various methods to unlock Xiaomi 14 Ultra,It delved into standard unlocking features like PIN, passcode, face and fingerprint recognition, pattern unlock, and how to handle situations where you forget your screen unlock method. It also highlighted that learning to unlock your screen, especially on Xiaomi phones, is crucial to ensure continuous access to your device.

Wondershare Dr.Fone is a reliable tool for those challenging moments when you forget your passcode. It offers a straightforward solution for screen unlocking and ensures you keep your phone functional and handy at all times.