7 Ways to Unlock a Locked Xiaomi Redmi Note 12T Pro Phone

“How to get into a locked phone? I have been locked out of my Android device and lost my passcode!”

If you are also facing the same issue, then you have come to the right place. There are plenty of ways to learn how to get into a locked Android phone when it comes to Android devices. From using a third-party tool to Google’s native solution – the sky is the limit. This post will make you familiar with different ways to unlock a device without knowing its passcode. Read on and learn how to get into a locked Android device.

safe & secure

Part 1: How to get into a locked phone with Dr.Fone?

Dr.Fone - Screen Unlock (Android) provides a hassle-free solution to unlock an Android device in minutes. It can remove a device’s PIN, password, pattern, and even fingerprint security without causing any harm to it. Therefore, you would be able to unlock your device without losing your data while using some Samsung or LG Android phones. If you want to break the locked screen with Dr.Fone from other brand phones, including iPhone, Huawei, and Oneplus, it will wipe out your phone’s data after unlocking successfully.

Dr.Fone - Screen Unlock (Android)

Get into Locked Phones within Minutes

5 screen lock types are available: pattern, PIN, password, fingerprints & Face ID.
Easily remove the lock screen; No need to root your device.
Everybody can handle it without any technical background.
Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

To learn how to get into a locked phone using Dr.Fone, follow these steps:

Step 1. Go to the official website of Dr.Fone - Screen Unlock (Android) and download the tool on your computer. After installing it, launch the interface and click on the option of “Screen Unlock” from the home screen.

Step 2. Connect your Android device to the computer. Click “Android” > “Unlock Android Screen” and select the Xiaomi Redmi Note 12T Pro device brand on the list. If your device is listed in the supported list , you can unlock locked phone without data loss.

Step 3. Now, you need to put your Android device in Download mode. To do this, you need to turn your device off by pressing the Power button. Afterward, press the Home, Power, and Volume Down buttons together. After a while, let go of these buttons and press the Volume Up button to enter the Download Mode.

Step 4. As soon as your device is not in the Download Mode, Dr.Fone will automatically start downloading its respective recovery packages.
Step 5. Sit back and wait as the application downloads the package and performs the required steps to unlock your device. In the end, it will notify you by displaying the following message.

That’s it! By following these steps, you would be able to learn how to get into a locked Android phone without losing any data.

Tips: Cannot find your device model in the supported list or your phone is not Samsung? Worry not, as Wondershare Dr.Fone can also help you to unlock other device models (inlcluding Huawei, LG, Xiaomi, etc) in a matter of seconds. Just install this tool on your computer and connect your phone to start the unlock process!

Part 2: How to get into a locked phone with Android Device Manager?

Google’s Android Device Manager (also known as Find My Device) can be used to locate a lost phone, erase it remotely, ring it, and change its lock. You can access it from any other device and use its features remotely.

Step 1. Firstly, go to the Android Device Manager’s website right here . Log in with the Google account that is already linked to your Android device.
Step 2. Once the interface is loaded, you can select your phone. It will locate the Xiaomi Redmi Note 12T Pro device automatically and provide various options.

Step 3. Choose the “Lock” option to proceed.
Step 4. This will display a new prompt. From here, you can get the new password for your device and confirm it.

Step 5. Additionally, if your device is lost, you can display an optional message and contact number on the lock screen. Click on the “Lock” button to save changes and exit the screen.

Part 3: How to get into a locked phone with Samsung Find My Mobile?

If you are using a Samsung device, you can also use its Find My Mobile service to unlock your device remotely. It is an excellent tool that can be accessed remotely and perform a wide range of operations that can be performed on the Xiaomi Redmi Note 12T Pro device. Follow these easy instructions to learn how to get into a locked Android Samsung device.

Step 1. Open Samsung’s Find My Mobile website right here on any device of your choice.
Step 2. Login using the credentials of the Samsung account linked to your existing device that is needed to be unlocked.
Step 3. On its dashboard, you can access various features associated with your device. If you have multiple devices linked to your account, you can select it from the top-left panel.

Step 4. From the provided options on the left panel, click on the “Unlock My Screen” option.
Step 5. Click on the “Unlock” button again to move past the lock screen of your device.

Step 6. After waiting for a while, you will get the following prompt. From here, you can set up a new lock for your mobile or can click on the “Lock My Screen” option to do the same.

Part 4: How to get into a locked phone using the ‘Forgot Pattern’ feature?

If your device is based on Android 4.4 and earlier versions, you may also use its native “Forgot Pattern” feature to unlock it. Though, you should have access to the Google account credentials linked to the Xiaomi Redmi Note 12T Pro device beforehand. To learn how to get into a locked phone with this technique, follow these steps:

Step 1. To get the Forgot Pattern option, enter the wrong PIN/pattern on your device.
Step 2. This will display the “Forgot Pattern” button on the bottom of the screen. Just tap on it to continue.

Step 3. On the next screen, you can unlock your device by providing the backup PIN of your device or sign in using the Google credentials of the account linked to the Xiaomi Redmi Note 12T Pro device.

Step 4. After bypassing this feature, you can unlock your device and set up a new PIN or pattern.

Part 5: How to get into a locked phone by factory reset?

If nothing else seems to work, then you can also choose to factory reset your device. Even though this will unlock your device, it would also erase its content and saved settings. To know how to get into a locked Android phone, follow these steps:

Step 1. Turn off your device by pressing the Power button.
Step 2. Now, you need to put your device into recovery mode. This can be done by applying the correct key combinations, which can differ from one device to another. Some common combinations are: Volume Up + Home + Power, Home + Power, Volume Up + Power + Volume Down, and Volume Down + Power button.
Step 3. Once your phone has entered the recovery mode; you can navigate with the Volume up and down button and use the Power button to make a selection.

Step 4. Select the option of “wipe data/factory reset.

Step 5. This will display the following prompt. Confirm your choice by selecting the “Yes” option.

Step 6. Wait for a while as your phone will be restarted with factory settings.

Part 6: How to get into a locked phone in Safe Mode?

If you are using a third-party application to lock your device, you can easily disable it by restarting your phone in safe mode. In this way, you can get rid of the respective app without causing any damage to the Xiaomi Redmi Note 12T Pro device. You can learn how to get into a locked Android phone by following these steps:

Step 1. Long-press the Power button to activate the Power option on the screen.
Step 2. If you don’t get the option to restart the phone in Safe Mode, then long tap the “Power off” option.
Step 3. It will provide the following prompt regarding Safe Mode. Just tap on the “Ok” button to confirm your choice.

Part 7: How to get into a locked phone using Custom Recovery?

Since custom recovery provides a third-party recovery environment, it can learn how to get into a locked Android device. Additionally, you need to flash it via an SD card since you won’t access the phone storage on a locked device.

Step 1. To start with, you need to download the password/pattern disable file from right here and copy it onto your SD card.
Step 2. Mount the SD card on your device and restart it in recovery mode by providing the correct key combinations.
Step 3. From the provided options, choose to install zip from the SD card.
Step 4. Confirm your selection and let your phone be restarted with no lock screen.

Bonus Tip: General tips for unlocking phone successfully

By following these tips, you can increase the chances of successfully unlocking your phone while safeguarding your data and security.

Data Backup: Regularly back up your data that ensures you have a recent backup of all your important data, such as contacts, photos, videos, and documents. This will prevent data loss in case the unlocking process results in a factory reset.
Reputable Methods: Use reputable and official unlocking methods whenever possible, such as Dr.Fone - Screen Unlock.

Conclusion

By following these simple steps, you would learn how to get into a locked phone. If you are looking for a trouble-free way to unlock an Android device, then give Dr.Fone - Screen Unlock a try. It is a highly reliable solution to learn how to get into a locked Android phone and unlock your device in minutes with no complications.

Top 12 Prominent Xiaomi Redmi Note 12T Pro Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Xiaomi Redmi Note 12T Pro can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
Bypass the FRP lock of Samsung without a PIN or Google account.
Everyone can handle the lock screen without any tech knowledge.
Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
With Dr.Fone, bypassing screen locks can be achieved without data loss.
Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Xiaomi Redmi Note 12T Pro fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

Step 2: Selecting Google As the Xiaomi Redmi Note 12T Pro device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Xiaomi Redmi Note 12T Pro device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Xiaomi Redmi Note 12T Pro device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Xiaomi Redmi Note 12T Pro device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Xiaomi Redmi Note 12T Pro device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Xiaomi Redmi Note 12T Pro fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Xiaomi Redmi Note 12T Pro device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Xiaomi Redmi Note 12T Pro device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Xiaomi Redmi Note 12T Pro device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Xiaomi Redmi Note 12T Pro fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Xiaomi Redmi Note 12T Pro device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Xiaomi Redmi Note 12T Pro device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Xiaomi Redmi Note 12T Pro fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Xiaomi Redmi Note 12T Pro .

How to Bypass Android Lock Screen Using Emergency Call On Xiaomi Redmi Note 12T Pro?

The main reason why we keep our smartphone locked is to prevent children (or stalkers) checking out our private photos or messages. You don’t want anyone to access your pictures, emails, or other important data. What if you forget your pattern or PIN and cannot access your phone? Or someone changes lock screen pattern to leave you annoyed?

To avoid such types of conditions, we have tried and tested the following methods to bypass the Xiaomi lock screen pattern, PIN, password, and fingerprint.

Method 1. Use ‘Find My Mobile’ feature on Xiaomi Phone

All Xiaomi devices come with the “Find My Mobile” feature. To bypass the Xiaomi lock screen pattern, PIN, password, and fingerprint, you can just follow the below steps to get it done.

Step 1. First, set up your Xiaomi account and log in.
Step 2. Click the “Lock My Screen” button.
Step 3. Enter a new PIN in the first field
Step 4. Click the “Lock” button at the bottom
Step 5. Within a few minutes, it will change the lock screen password to the PIN so that you can unlock your device.

Method 2. Use Android Device Manager to Bypass Xiaomi Password

To know how to unlock a Xiaomi phone lock password with Android device manager, make sure the Android Device Manager is enabled on your device.

Step 1. Visit google.com/android/devicemanager on other smartphones or PC.
Step 2. Log into your Google account that you used on your locked device.
Step 3. Choose the Xiaomi Redmi Note 12T Pro device you want to unlock in ADM interface
Step 4. Click on the “Lock” option.
Step 5. Enter a password. There is no need to enter any recovery message. Select “Lock” again.
Step 6. You would see a confirmation below if it is successful, with “Ring, Lock and Erase” buttons.
Step 7. Now you must get the password field on your phone where you can enter your new password, and your phone will be unlocked.
Step 8. Go to lock screen settings on your device and disable the temporary password.

If your device is still running on Android 4.4 or lower, here’s how to bypass the Xiaomi lock screen fast.

Step 1. Enter the wrong pattern for five times
Step 2. Choose “Forgot Pattern”
Step 3. Enter your Google account login or backup PIN
Step 4. Now your phone would be unlocked.

Method 4. ‘Pattern Password Disable’ and Custom Recovery (SD Card needed)

To bypass the Xiaomi lock screen in this method, you ought to be an advanced user who knows what are “custom recovery” and “rooting”. You have to install any kind of customer recovery, and you should have an SD card on your phone. SD card is required to move a ZIP file to the phone, and it is the only way to transfer the file when the Xiaomi Redmi Note 12T Pro device is locked.

Step 1. Download a zip file named “Pattern Password Disable” on your computer and move it to the SD card of your Xiaomi device.
Step 2. Insert the card on your device
Step 3. Restart your device into recovery mode.
Step 4. Flash the file on your card and restart the phone.
Step 5. Now your phone would boot up without lock screen. Don’t worry if you had a gesture lock or password. All you need to do is to input a random gesture or password, and it will be unlocked.

Method 5. Delete the Password File Using ADB

It is yet another option that will work only when you have enabled USB Debugging previously on your device, and your PC is allowed to connect via ADB. If you meet such requirements, it is ideal to use this method to unlock the Xiaomi lock screen.

Step 1. Connect your device to the PC using USB cable and open command prompt in the adb directory. Type the command “adb shell rm /data/system/gesture.key” and then press “Enter”.
Step 2. Restart your phone, and a secure lock screen must be gone, and you can access your device. Be sure to set a new PIN, pattern, or password before rebooting again.

Method 6. Factory Reset to Bypass Xiaomi Lock Screen

A factory reset is the best option in almost any case if one of these solutions couldn’t work. According to your device type, the process may vary. In most devices, you have to turn off the Xiaomi Redmi Note 12T Pro device completely to start the process. But this method will delete all the precious data on the Xiaomi Redmi Note 12T Pro device after the factory reset.

Step 1. Hold the power button and volume down at the same time. It will open the Bootloader menu.
Step 2. Press the volume down button two times to choose “Recovery Mode” and select it by pressing the “Power” button.
Step 3. Hold down the power button and tap “Volume Up” once, and you would enter “recovery” mode.
Step 4. Choose “Wipe Data/Factory Reset” option by using volume buttons.
Step 5. Select it by pressing the Power button.
Step 6. Select “Reboot System Now” once the process is done.

Backup your Xiaomi phone regularly in case of any data loss in the future.

Method 7. Boot into Safe Mode

Chances may be that you are using a third-party lock screen app. Then lucky for you, this way works best to bypass the Xiaomi lock screen. Specifically, you can boot your Xiaomi device into Android Safe Mode .

Step 1. Open up the Power menu from the lock screen and press and hold the “Power Off” option.
Step 2. It will ask if you want to boot in safe mode. Tap “OK”
Step 3. Once the process finishes, it will temporarily disable the lock screen activated by the third-party app.
Step 4. Uninstall the third-party lock screen or just reset the data.
Step 5. Reboot your device and get out of safe mode.
Step 6. Now the irritating lock screen app is removed completely.

Method 8. Other Methods

Step 1. Take your friend’s phone to call on your locked phone.
Step 2. Accept the call and press the back button without disconnecting.
Step 3. Now you can access the Xiaomi Redmi Note 12T Pro device completely
Step 4. Go to the security settings of the Xiaomi Redmi Note 12T Pro device and remove the pattern or pin.
Step 5. It will ask you the correct pin that you don’t know, guess, and try various combinations you can recall.

To avoid forgetting your password or PIN next time, be sure to write the pattern or numbers on a text file or paper to keep them safe. If you have to bypass the Xiaomi lock screen pattern, PIN, password, and fingerprint, you may consider using Dr.Fone - Screen Unlock (Android). It is a professional tool that can remove all the fingerprints, pattern, and password lock screens without losing any data on your phone.

Unlock Android

7 Ways to Unlock a Locked Xiaomi Redmi Note 12T Pro Phone