Forgot Pattern Lock? Here’s How You Can Unlock Itel A05s Pattern Lock Screen

Forgetting the pattern lock of a device and getting locked out of it is probably one of the most frustrating scenarios faced by Android users. Nevertheless, unlike popular operating systems, Android provides a seamless way to past the forgot pattern lock feature.

You can either try Google’s native solution or a third-party tool in case you have forgotten the pattern lock on your device and reset it. In no time, you will be able to access your device (or even someone else’s phone by following these techniques). To make things easier for you, we have provided three simple solutions to resolve forgotten patterns on Android devices.

Part 1: How to bypass forgot pattern lock using the ‘Forgot Pattern’ feature?

One of the easiest and fastest ways to fix the forgot pattern lock issue on a device is by using its inbuilt “Forgot Pattern” feature. If you are using an Android 4.4 or earlier version, then you can simply access this feature. Since users can hack an Android device just by knowing the Google credentials of the connected device, the solution was later discontinued (as it was considered a security vulnerability). Nevertheless, if your device hasn’t been updated and you are using an Android 4.4 or previous version, then you can bypass the forgot pattern lock by following these steps:

Step 1. Firstly, provide the wrong pattern to your device. It will let you know that you applied the incorrect pattern.

Step 2. On the same prompt, you can see an option of “Forgot pattern” on the bottom. Simply tap on it.

Step 3. This will open a new screen, which can be used to bypass the forgotten pattern of Android. Select the option for entering the Google Account details and proceed.

Step 4. To reset the forgot pattern lock, you need to provide the correct Google credentials of the account already linked to the Itel A05s device.

Step 5. After signing in to the interface, you will be asked to provide a new pattern lock for the Itel A05s device.

Step 6. Confirm your choice and set a new pattern lock on your device.

Part 2: How to get past forgot pattern lock using Dr.Fone - Screen Unlock (Android)?

One of the major drawbacks of the “Forgot pattern” feature is that it doesn’t work on new Android devices. Since most of the Itel A05s devices out there have been updated, the technique has been outdated. Therefore, you can simply take the assistance of Dr.Fone - Screen Unlock (Android) to bypass the forgot pattern lock on your device. Without causing any harm to your device or erasing its data, your device’s password or pattern would be removed.

It is a part of the Dr.Fone toolkit and is compatible with all the leading Android devices out there. It can be used to remove passwords, patterns, pins, and more. It has an easy-to-use interface and provides a simple click-through process to resolve the forgot pattern Android lock on your device. However, this tool merely retains all the data after unlocking Samsung and LG screens. Other Android locked screens can also be unlocked, and the only thing is that it will wipe all the data after unlocking.

Dr.Fone - Screen Unlock

Save You from Ending up with a Locked Phone After Too Many Pattern Attempts

• It can remove 4 screen lock types - pattern, PIN, password & fingerprints.
• Work for Samsung, LG, Huawei phones, Google Pixel, Xiaomi, Lenovo, etc.
• Unlock 20,000+ models of Android phones & tablets.
• Enable you to break your Android pattern lock without root.

4,008,669 people have downloaded it

Step 1. To start with, visit the official website of Dr.Fone - Screen Unlock (Android) and download it on your system. After installing it, launch the tool and select the option of “Screen Unlock” from the home screen.

Step 2. To use its forgot pattern lock feature, you need to connect your Itel A05s to your system using a USB cable. Once your device has been detected automatically, just click on the “Android”> “Unlock Android Screen” button.

Step 3. Select the correct phone brand. It is important to ensure phone brand correctness to prevent bricking.

Step 4. Then, enter “confirm” in the box to tell the tool that you agree to proceed.

Step 5. Now, in order to fix the forgot pattern Android issue, you need to put your device into the Download Mode. To do this, you need to ensure that your device is switched off. Once it is off, hold the Power, Home, and Volume Down buttons simultaneously. After a while, press the Volume Up button to put your device into Download Mode.

Step 6. After your device enters its Download Mode, it will automatically be detected by the interface. It will start downloading the needed recovery packages to resolve the issue. Sit back and relax, as it might take a while to download the recovery packages. Let the application process the essential operations, and don’t disconnect your Itel A05s until it is completed successfully.

Step 7. In the end, you will get a prompt like this on the screen, informing you that the password/pattern on the Itel A05s device has been removed.

That’s it! Now, you can disconnect the Itel A05s device safely and use it how you like.

Part 3: How to bypass forgot pattern lock using Android Device Manager?

To make it easier for its users to locate, lock, or erase their devices remotely, Google has developed a dedicated feature of the Android Device Manager. It is also commonly known as “Find My Device” as it is mostly used to locate a lost (or stolen) device. Though you can use this feature to ring your device, lock it, unlock it, or erase it remotely. You can access it from anywhere by providing your Google credentials and resolving the forgot pattern Android problem.

All of this can be done by following these steps:

Step 1. Launch a web browser of any device and go to the Android Device Manager website by clicking right here: https://www.google.com/android/find .

Step 2. You need to provide your Google credentials to sign in. Remember, this should be the same Google account that is linked to your device.

Step 3. After signing in, select the target Android device.

Step 4. You will get the location of the Itel A05s device with several other options (lock, erase, and ring).

Step 5. Click on the “Lock” button to reset its password.

Step 6. It will open a new pop-up window. From here, you can provide the new password for your device.

Step 7. After confirming your password, you can also provide an optional recovery message and phone number (if your device has been lost or stolen).

Step 8. Save your changes and sign out of your account from Android Device Manager.

This will automatically reset the old pattern on your device to the new password.

Part 4: How to bypass forgot Samsung pattern lock using Samsung Find My Mobile

Bypassing a forgotten Samsung pattern lock using the Samsung Find My Mobile service is a method specifically designed for Samsung devices. This method allows you to unlock your Samsung device without losing any data. It’s a convenient way to regain access to your device if you’ve forgotten the pattern lock.

However, it relies on having previously set up Samsung Find My Mobile and linked your device. Here is how to unlock your Samsung device with Samsung Find My Mobile:

Step 1: Access the Find My Mobile (SmartThings Find) website using either a computer or another mobile device. Sign in using the Samsung account details linked to the locked device.

Step 2: After successfully logging in, locate the locked Samsung device. Now, click on the “Unlock” feature. Upon choosing this option, a pop-up window will appear. It will prompt you to input your Samsung account password. Once you’ve entered your password, proceed to unlock the Itel A05s device by pressing “Next.”

Part 5: How to bypass forgot pattern lock using Safe Mode

If you have locked your device using a third-party app, there exists a simple solution. You can use the Safe Mode to remove the problematic app. Safe Mode is intended for troubleshooting and disabling third-party apps. Following are the steps you need to follow to use Safe Mode to unlock your Android device:

Step 1: Initiating Safe Mode requires a simultaneous three-second press of the “Volume Down” and “Power” keys. When the power menu becomes visible, proceed to long-press the “Power Off” icon.

Step 2: In a moment, you’ll see the option “Safe Mode” replacing the other “Power Off” menu options. Proceed to boot your device into Safe Mode and uninstall the troublesome application.

Part 6: How to bypass forgot pattern lock using Factory Reset

Bypassing a forgotten pattern lock on an Android device using a factory reset is a last resort. The reason is it will erase all data on your device, including apps, photos, and settings. However, it can be an effective way to regain access to your device when other methods have failed. Here’s how to do it:

Step 1: Turn off your Samsung device and connect it to your computer. Now press and hold “Volume Up” and “Power” keys for a while. Release the keys once the Itel A05s device enters Recovery Mode.

Step 2: In Recovery Mode, use the Volume keys to navigate to “Wipe data/factory reset” and select it with the “Power” key. Confirm the action on the next screen by selecting “Factory data reset.”

Wrap it up

If you have also forgotten the pattern lock on your device, then you can simply remove or reset it by following these solutions. In this way, you won’t even lose your important data files or cause any harm to your device. Without facing any unwanted setbacks, you would be able to bypass forgot pattern Android using Dr. Fone - Screen Unlock . It provides a fast, reliable, and secure solution to remove the lock screen security of an Android device in an effortless way.

Top 12 Prominent Itel A05s Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Itel A05s can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Itel A05s fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Itel A05s device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Itel A05s device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Itel A05s device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Itel A05s device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Itel A05s device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Itel A05s fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Itel A05s device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Itel A05s device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Itel A05s device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Itel A05s fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Itel A05s device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Itel A05s device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Itel A05s fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Itel A05s .

Universal Unlock Pattern for Itel A05s

Why do you use a mobile password or pattern to lock your phone? Of course, you want to keep your personal information private from prying eyes. Have you ever been in a position where you recently changed your pattern lock or password code but then forgot it? We’ll talk about how to unlock your Android phone’s universal pattern lock.

We’ve recently received many feedback and questions from users who want to use a pattern unlock on their device. Whether you’ve forgotten your Android device’s password or want to gain access to someone else’s phone, there are a number of ways to figure out how to unlock a pattern on an Android phone. This comprWe’llhensive guide wi show you how to unlock patterns in six ways.

Part 1: Common universal unlock pattern for Itel A05s

Today, many mobile phone users present a simple lock pattern that isn’t particularly strong or difficult to detect. That is something that many of us are guilty of. Lock patterns were intended to take the place of traditional passwords, however, we frequently forgo security in favor of easier lock patterns. Let’s look at some of the most frequent pattern locks in use today.

1. Patterns from the Upper Left Corner: It’s estimated that 44% of people begin their patterns from the upper left corner.
2. Other Corners: According to research, around 77 percent of users begin their patterns in one of the remaining three corners.
3. Nodes: It was discovered that many users only utilized five nodes. While a larger number of individuals used 4 nodes.
4. Letter Patterns: According to a study, around 10% of lock patterns are in the form of an alphabet. Some users just use the initial of their name.

Part 2: [Easiest] Universal way to Unlock Pattern for Itel A05s

If you want the easiest method to unlock an Android phone, then Dr.Fone - Screen Unlock (Android) is an amazing choice. It is a tool that allows you to unlock your phone without much hassle. You can use it for universal pattern lock for MI, or other phones.

If you need to unlock a pin, pattern, password, fingerprint, or any other type of lock on an Android smartphone, Dr.Fone - Screen Unlock is the tool to use. It is a highly useful and sophisticated tool that allows you to bypass your device’s lock screen without harming it or erasing its contents (if your phone is not a Samsung or LG, the data will be erased after unlocking the screen).

Dr.Fone - Screen Unlock (Android)

Remove Android lock screen in 5 minutes

• On Android, disable all patterns, PINs, passwords, and fingerprint locks.
• Bypass Android FRP lock without a PIN or Google account.
• During the unlocking process, no data is lost or hacked.
• On-screen instructions are simple to follow.
• Mainstream Android devices are supported.

3,291,332 people have downloaded it

Know how do you use Dr.Fone - Screen Unlock (Android) to unlock a pattern lock

Step 1: Download and run Dr.Fone – Screen Unlock to unlock your phone’s pattern. Select the “Screen Unlock” option from the home screen.

Step 2: Make sure your device is connected to the system. Select “Android” to continue, then click the “Unlock Android Screen” button once it has been recognized.

Step 3: On the next screen, choose the correct model and other information of your device.

Step 4: Now, turn your phone into download mode. Turn it off and simultaneously hit the Home, Power, and Volume Down keys. Then, on your device, hit the Volume Up key to enter Download Mode.

Step 5: Relax while downloading the recovery software and completing the necessary steps to unlock your handset.

Step 6: Click on “Remove Now” button and the unlocking process will begin.

Step 7: When the process is finished, you will be alerted. Simply unplug your device and use it without a password or pattern lock.

safe & secure

Part 3: Other ways to Unlock Pattern for Android

There are other ways to unlock the universal unlock patterns for Android. We have mentioned some of them below.

Way 1: Remove Gesture File Using ADB

The first method is ADB, which stands for Android Debug Bridge. With the help of this, you can unlock your Android’s universal unlock pattern without the need of a factory reset. However, the process may seem a bit time-consuming to you. Here is how you can do it.

Step 1: Open your PC and head to Android Developer’s site . Download ADB now.

Step 2: Launch it now and install the packages on your PC.

Step 3: Connect your Android to PC now. Before that, make sure to enable USB Debugging. If you don’t know-how, simply head to the “Settings”> “About Phone” and tap on “Build Number” 7 times. This will enable the Developer’s Options.

Step 4: Now go to the Developer Options menu and turn on the USB Debugging.

Step 5: After connecting Android to PC, you need to open the command prompt in the installation directory.

Step 6: Run the following command and press Enter key: adb shell rm /data/system/gesture.key

In regular mode, restart the phone. The pattern will be requested. However, any pattern will unlock the screen.

Way 2: Boot into Safe Mode to Bypass Third-Party App Screen Lock

It’s one of the most straightforward ways to get past the lock screen. One thing to note is that this method is effective only if the lock screen is a third-party app rather than the standard one.

Step 1: Firstly, long-press the Power button to get the power menu.

Step 2: Now, long tap the “Power Off” button and click “OK” when shown the pop-up.

Step 3: This will restart your device in safe mode.

Step 4: This will turn off the third-party lock screen for the time being. Clear the lock screen app’s data, uninstall it, and then reboot to exit safe mode.

Way 3: Unlock Pattern Lock via Factory Reset

This should only be a last option because it will completely delete your device’s data and saved settings. Your device will be reset to factory settings, meaning your device’s settings will get back to the same as when you first bought it. If you want to learn how to unlock a pattern by doing a factory reset, follow these steps:

Step 1: Long press the Home, Power and Volume Up keys to Recovery Mode.

Please note that the Recovery mode method may vary from device to device. So please ensure to check the key combination before you do it.

Step 2: Now go to the “wipe data/factory reset” option using the volume keys. To confirm it, press the Power key.

Step 3: Now, again, confirm the process using the same keys.

Step 4: The phone will perform the factory reset. In a short while, restart your device and there will be no lock screen.

Way 4: Unlock Pattern Lock with Android Device Manager

Android Device Manager unlocking is the second-best service for bypassing the Android lock screen on locked Android devices and tablets. Working on this service is quite straightforward, and it only works if the user has a Google account. This service is accessible and usable from any device or computer.

There are a few things to keep in mind as you use this service to get around the lock screen. If the Android device is compatible, the Android Device Manager will connect it after a few tries. After it has been connected to the Itel A05s device, we can begin by pressing the “Lock” button.

After pressing the “Lock” button, a popup will appear, asking for a new password to replace the forgotten pin, pattern, or password.

Type the new password once, then confirm it by typing it again. This will change the password in a few minutes and the new password can be used to unlock the Itel A05s device.

Way 5: Use Forgot Pattern Feature [Android 4.4 Version and Earlier]

If you use an older Android version, you can get rid of the universal unlock pattern by forgot pattern feature. On earlier Android devices, this feature is enabled by default. After a few failed attempts, the warning “Try again in 30 seconds” appears and here is where the steps begin. Let us get to know in detail.

Step 1: Simply enter wrong pattern too many times until try again in 30 seconds warning comes.

Step 2: Select the “Forgot Pattern” option below the message.

Enter the primary Gmail account and password you used to set up your Android smartphone after selecting the same. Then you must provide your Google account information. A new unlock pattern will be emailed to you by Google.

Conclusion

Universal unlock patterns allow you to unlock your phone easily when you think you have forgotten. Well, numerous patterns allow you to unlock the Android. You can choose either of the above to unlock your android phone. If you have failed to use any pattern, you can easily unlock your Android by Dr.Fone - Screen Unlock (Android) . It will let you access yours by unlocking it hassle-free.