How to Reset a Locked Xiaomi Redmi 12 Phone

There might be some moment when you have accidentally locked your phone and have no way to recover the phone’s functionality without resetting. This moment is very much irritating to any of you. If your phone is locked, and you can’t run your phone due to forgetting the password, you don’t have to be dumbfounded. There are some ways by which you can recover your phone to its previous state. In this article, we will show you how to reset a locked phone.

Part 1: How to Hard Reset Locked Xiaomi Redmi 12 Phone

The most common way of resetting an Android phone screen lock is by hard reset. You can hard reset your Android phone to unlock it. Remember, hard reset will erase all the data stored on your phone. So hard reset will unlock your phone, but you will not get your stored data back on it. So if you have no recent backup for your phone data, beware of that before going for a hard reset.

Here you can learn how to reset a locked phone from different brands, as different models or brands have unique methods of resetting.

1. How to reset a locked HTC phone?

Now we will show you how to unlock HTC phone by hard reset.

You will have to press and hold the volume down button along with the power button. Keep holding until you see Android images. Then release the buttons and then follow the volume down button to go for factory reset, afterward select the power button.

2. How to reset a Samsung phone that is locked?

Press and hold the volume up key, along with the power button and home key. You will see the Samsung logo onscreen. Go down to wipe data/factory reset by holding the volume down key. Now choose Yes. You could delete all the data on your phone by tapping on the volume down key. Your phone will start rebooting.

3. How to reset an LG phone that is locked?

To unlock your LG Android phone, you will have to press and hold the volume key and the power or lock key. You have to release the Lock or power key when you see the LG logo on the screen of your phone. Just after that, press and hold the power or lock key again. You can release all the buttons once you see a factory hard reset on the screen.

4. How to reset a locked Sony phone?

You have to confirm that your phone is switched off. Press and hold three keys altogether. The keys are Volume Up, Power, and Home keys. You have to release the buttons once you see the logo on the screen. Now follow volume down to scroll down. Power or Home key is used for selection. Choose factory reset or wipe data.

5. How to reset a locked Motorola phone?

Firstly, switch off your phone. Then press and hold the power key, home key, and volume up key. After a while, you will see the logo on the screen, just then release all the buttons. For scrolling, you can use the volume down key, and for selecting, you can use either home or power key. Now select factory reset or wipe data.

Whatever your model or brand is, keep in mind that hard reset will delete all your valuable data from your phone! So if you want to unlock your locked phone without losing data from it, then follow the next part.

Part 2: Reset Android Phone Screen Lock Without Password

In this part, we will discuss Wondershare Dr.Fone for unlocking your locked Android device. Here are some of the features of this great software -

Dr.Fone - Screen Unlock (Android)

Remove Android lock screen in 5 minutes

Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
Bypass Android FRP lock without a PIN or Google account.
Unlock mainstream Android brands like Samsung, Huawei, LG, Xiaomi, etc.
No tech knowledge required. Everyone can handle it.

3981454 people have downloaded it

Here is the step-by-step procedures for unlocking your Android phone - other Android phones can also be unlocked with this tool

Step 1. Go for “Screen Unlock”

The first thing that you will have to do is open Dr.Fone on your PC and then click on Screen Unlock that allows your device to remove the password from any of the 4 types of lock screens (PIN, Password, Pattern, and Fingerprints).

Step 2. Select the Xiaomi Redmi 12 device from the list.

Step 3. Go for Specific Mode

Step 4. Remove Lock Screen without Password

Once the previous step is complete, you will see the lock screen removal process started. After completing the lock screen removal process, you could enter into your phone without needing any password.

safe & secure

Conclusion

Forgetting your password is a perplexing situation though you have the solution to unlock your Android phone, as hard reset does not give your data back, you should rely on the software called Dr.Fone - Screen Unlock (Android) for smooth operation. So have the software and cheer up. I hope you will enjoy and forget about the hassle when you lost your password.

How to Reset a Xiaomi Redmi 12 Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Xiaomi Redmi 12 phone that is locked, or how to get into a locked Xiaomi Redmi 12 phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Xiaomi Redmi 12 Phone that is locked?

Before you go to reset your locked Xiaomi Redmi 12 phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Xiaomi Redmi 12 phone typically involves performing a factory reset. The process erases all data and settings on the Xiaomi Redmi 12 device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Xiaomi Redmi 12 , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Xiaomi Redmi 12 Phone That is Locked With Google Find My Device?

Resetting a locked Xiaomi Redmi 12 phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Xiaomi Redmi 12 phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Xiaomi Redmi 12 phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Xiaomi Redmi 12 phone that is locked without a password?

In order to reset your Xiaomi Redmi 12 phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Xiaomi Redmi 12 phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Xiaomi Redmi 12 Phone That Is Locked Without a Password!

Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
Work for forgotten passwords, second-hand Xiaomi Redmi 12 devices, etc.
Everyone can handle the lock screen without any tech knowledge.
Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Xiaomi Redmi 12 phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Xiaomi Redmi 12 .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Xiaomi Redmi 12 device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Xiaomi Redmi 12 Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Xiaomi Redmi 12 phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Xiaomi Redmi 12 phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Xiaomi Redmi 12 Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Xiaomi Redmi 12 device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Xiaomi Redmi 12 phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Xiaomi Redmi 12 phone with Gmail ID and password

It is imperative to understand that unlocking your Xiaomi Redmi 12 Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Xiaomi Redmi 12 phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Xiaomi Redmi 12 device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Xiaomi Redmi 12. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Xiaomi Redmi 12 phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Xiaomi Redmi 12 phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

How to Remove a Previously Synced Google Account from Your Xiaomi Redmi 12

The setting up process of a new Android phone requires you to add a Google account that saves all activities and data of the phone like search history, details of online shipping, play store purchases, and more. Once the account is set, it cannot be changed till you delete everything from your phone. Moreover, with the introduction of FRP lock, even a factory reset will not remove the synced Google account.

So, now what if you want to sell your phone or have purchased a second-hand device that is still associated with the previous owner’s Google account? No, worries as there are workarounds available that will help you remove your previously synced google account from your Android device.

Keep reading to know more in detail about how to bypass previously synced google accounts.

Heres a full guide on how to remove google account from android, click to know more!

Part 1: Remove Previously Synced Google Account from Android Phone Without Phone Reset

In this part, we will discuss the methods that can be used for removing the previously synced account from your Android phone without a phone reset.

If you just plan to reset your phone, maybe because of the lag caused by the phone cache, and you know the inconvenience of Google FRP as a protection mechanism, then you can remove Google FRP through the Settings menu.

The steps for this method are listed below.

Step 1: On your Android phone go to the Settings option and choose Accounts & Backup.
Step 2: Select the Manage Accounts option now and the list of the associated Google Devices will appear.
Step 3: Choose and click on the Google Account that you want to remove and a pop-up message will appear to inform you that all the account data will be deleted with this action.

To confirm the removal of the account, click on the Remove account button.

Method 2: Remove the Google account from the Android phone using the computer

There is another method using which you can remotely remove the Google account associated with your phone. The steps for the method are listed below.

Step 1: Using another device or a PC, sign in to your Google account that was previously synced on this device and choose the Security option.
Step 2: Next scroll down and then tap on the Your devices option and choose to Manage devices.
Step 3: You will now see the list of devices linked to your Google account. Next, tap on Find a lost or stolen phone and then select the Remove option present next to Account access.
Step 4: You will be again asked if you want to delete the account. Select the Remove option.
Step 5: The account will be removed successfully and the confirmation message will appear.

Note: This method will actually sign out you from the Google account and will not delete it permanently. To again get access to the account, a notification will appear on your phone to enter the password.

Part 2: How to Disable Factory Reset Protection to Bypass Google Account Verification After Factory Reset

The Factory Reset Protection (FRP) is a security feature for the Android device that allows factory reset only after the associated Google ID and password are entered correctly. With multiple accounts and passwords to remember there is quite a possibility that you may forget your Android phone Google account details and here the need to bypass Google account verification arises.

Though there are multiple tools available we recommend Dr. Fone - Screen Unlock (Android) as the best and the most reliable option. Using this excellent Windows and Mac-based software, FRP lock on all popular Android devices including Samsung, LG, HTC, and others. The tool is simple to use and requires no technology. There is also an option where you can unlock your device if you do not know the OS version.

Dr.Fone - Screen Unlock (Android)

Get into Locked Phones within Minutes

4 screen lock types are available: pattern, PIN, password & fingerprints.
Easily remove the lock screen; No need to root your device.
Everybody can handle it without any technical background.
Provide specific removal solutions to promise good success rate

4,008,669 people have downloaded it

Steps to remove FRP lock using Dr. Fone-Screen Unlock (Android)

Step 1: Download, install and run the software on your system, and from the main interface choose the Screen Unlock option. Make sure that your phone is connected to WiFi.

Step 2: Next, choose Unlock Android Screen/FRP and then select the Remove Google FRP Lock option.

Step 3: Next, choose the OS version of your device from the given options, and then using a USB cable, connect your phone to your system.

Step 4: After the Xiaomi Redmi 12 device is connected, the Xiaomi Redmi 12 device information will appear on the software for you to confirm and the notification for the same will be sent to your Android phone.

Step 5: Now follow the notifications for removing the FRP lock and in the browser enter drfonetoolkit.com.

Step 6: Next, click on the Android 6/9/10 button, choose Open Settings and select the PIN option to set a PIN to be used in the further steps.

Step 7: Keep following the steps as they appear till you reach the Google Account Sign-In page. Here click on the Skip option that will successfully remove and bypass the Google Account.

The above given are the brief steps for the FRP bypass process. To learn about the entire process in detail, check Dr.Fone-Screen Unlock (Android) guide .

Part 3: Hire a Remote FRP Removal Service to Bypass ZTE/Motorola After Factory Reset

To bypass the FRP lock on your ZTE, Motorola, and Samsung device, there is also an online service called UnlockJunky.com that claims to remove the FRP lock and previously linked account on your Android device within 5-15 minutes. This is a paid service that also claims that if they are unable to remove the lock, they will refund the amount to their customers.

So, if you cannot sign in with a Google account that was previously synced, you can give this, method a try.

Step 1: Open the official service page Unlockjunky on your browser.

Step 2: Next, choose the Xiaomi Redmi 12 device’s brand, model, and unlock type from their respective drop-down menus. Click on Unlock Now button after entering the details.

Step 3: Now you need to initiate the order by providing the details asked and completing the payment.

Step 4: Next, the software needs to be downloaded and installed on your system, and using a USB cable, connect your phone to your computer.

Step 5: Connect with one of the support provider members through the live chat and they will help you remove the FRP lock on your Android phone.

With the steps above, you can remove the account previously synced on this device.

Limitations of using the Unlockjunky method:

This is a paid service.
Works only with Motorola, ZTE, and Samsung devices.
There is no surety that the service will work for removing the FRP lock on your devices.
If you have to remove the FRP lock from multiple devices, a separate payment for each device has to be done.

Conclusion

Above we have listed several ways to remove a previously synced Google account on your Android device. The best of all the listed solutions is Dr. Fone - Screen Unlock (Android) as it supports bypassing FRP lock on multiple Android devices in a hassle-free manner. Once the license is purchased, you can unlock as many numbers of devices as you want without any worries.

Unlock Android

How to Reset a Locked Xiaomi Redmi 12 Phone