How to Unlock Tecno Spark 10 5G Phone with Broken Screen
How to Unlock Tecno Spark 10 5G Phone with Broken Screen
Seeing as the only way to control your Tecno Spark 10 5G deviceis the touch screen, a broken device can cause you a lot of worries. Most people think that there is no way to get their device to work again let alone be able to unlock it if the screen is broken or cracked . It is, however, important to find a way to unlock the broken device so that you can gain access to your data and create a backup to restore to a new device.
In this article, we are going to look at a few simple ways you can unlock an Android device with a broken screen.
Here is a video for you to learn how to unlock Android phone or access phone with broken screen:
Method 1: Using Android Debug Bridge (ADB)
For this method, you will need your device and access to a PC. It is the most powerful method to unlock a broken Android device. It will however only work if you have enabled USB debugging on your android phone. If you haven’t, skip this method and see if method 2 or 3 might be of help.
ADB creates a bridge between the PC and your device which can then be used to unlock the Tecno Spark 10 5G device. Here’s how to use this bridge.
Step 1: Download the Android SDK package on your PC. You can download it here: http://developer.android.com/sdk/index.html . Extract the ZIP file on your PC.
Step 2: Download the necessary drivers for your device. The USB drivers for your device can be found on the manufacturer’s website.
Step 3: Launch Command Prompt on your PC and change the location of the ADB file. Type in the following into Command Prompt; cd C:/android/platform-tools
Step 4: Connect the Tecno Spark 10 5G device to your PC using USB cables. Enter the command “ ADB _device_” (without quotation marks). If your phone is recognized, you will see numbers in the Command Prompt message.
Step 5: Type in the following two commands. You will need to type in the second one immediately after the first. Replace 1234 with your password.
ADB shell input text 1234
Shell input key event 66
Step 6: Your phone will now be unlocked and you can proceed to back up its contents.
Dr.Fone - Screen Unlock (Android)
The Best Tool to Reset Phones Without Android Factory Reset Codes
- It enables your Android phones to get safe, simple, and trustful after reset.
- It is still helpful even though you don’t know the OS version of your devices.
- Everybody can handle it without any technical background.
- Provide specific removal solutions to promise good success rate.
4,008,670 people have downloaded it
Method 2: Using a USB Mouse and the On the Go Adapter
This is a great solution if you don’t have USB debugging enabled on your device. You will need your device, an OTG adapter and a USB mouse. It involves connecting the Tecno Spark 10 5G device to the USB mouse using the OTG adapter. Check if your device can be connected to a USB mouse. You can find an OTG adapter online, they are relatively inexpensive and very useful.
Before we begin, it is a good idea to ensure your device is sufficiently charged because the Mouse may drain your battery.
Step 1: Connect the Micro USB side of the OTG adapter to your device and then plug in the USB mouse to the adapter.
Step 2: As soon as the Tecno Spark 10 5G devices are connected, you will be able to see a pointer on your screen. You can then use the pointer to unlock the pattern or enter the Tecno Spark 10 5G device’s password lock.
You can then go about backing up the contents of your device.
Method 3: Using your Samsung Account
This method is a reliable way to unlock a Samsung device that has a broken screen or is not working correctly. While it is highly effective you will need to have a Samsung account registered with your device. The problem is that not many Samsung device users have registered their devices with the service. If you are among the lucky few who have, here’s how to use your account to unlock your device.
Step 1: Visit the https://findmymobile.samsung.com/login.do on your PC or any other device and log in with your account information.
Step 2: Select your device from the menu on the left-hand side of the screen.
Step 3: You should see the option “Unlock my screen” on the sidebar. Click on it and you will get instructions on how to access your device.
Software Update Pro - Check and update software installed on your computer.
Conclusion
Being unable to unlock your device is never a good place to be. We hope one of the above solutions will work for you. You can then gain access to your device and back up the files and contacts. This way your life doesn’t have to be disrupted- you can just restore the backup on a new device or the old one once the screen is fixed.
How to Unlock Tecno Spark 10 5G Phone Password Without Factory Reset?
You always set up some sort of lock to secure your smartphone to stop others from checking your phone data, messages, or pictures. More importantly, it is needed to deny admission to your valuable phone data in case it gets stolen. However, many times you come across this situation where your Android phones are stuck as you cannot unlock the password. Either your children have been playing with the lock patterns, and the screen gets locked due to entering the wrong password many times, or you have unexpectedly forgotten your password. Or somebody else has reset your password, or you have broken your mobile screen, and you cannot enter your password. Many similar situations may arise.
You are in the middle of some things, and you want to make some urgent calls. How to unlock Android phone passwords without a factory reset? What do you do then? There are very easy solutions to this that would help unlock your Android phone in no time without going for the factory reset and losing your valuable data.
Part 1: How to unlock Android password without factory reset using Dr.Fone - Screen Unlock?
Whether you have a pattern or PIN or fingerprint as a password, you can remove any type of password by using the Dr.Fone - Screen Unlock. The only defect is that your data will be wiped out after unlocking the phone successfully. It helps in removing the lock screen on Android phones. Now, if you are thinking about how safe it is, let me assure you that the process is very safe and simple, with no risk of data leakage. This process is supported by most Samsung and LG smartphones without data loss, and you just need to connect your handset to let the Dr.Fone - Screen Unlock start the procedure.
safe & secure
Dr.Fone - Screen Unlock (Android)
Get into Locked Android Phones without Factory Reset
- 4 screen lock types are available: pattern, PIN, password, fingerprints, face ID, etc.
- Support 20,000+ mainstream models of Android phones & tablets.
- Save you from ending up with a locked phone after too many wrong attempts.
- Provide specific removal solutions to promise good success rate.
4,008,669 people have downloaded it
Follow the following steps to unlock your Android password without factory reset using Dr.Fone.
Step 1: Firstly, install and run Download Dr.Fone –Screen Unlock on your computer. And connect your Android phone to your computer with a USB cable > download.
Step 2: After that, select the phone model from the list or choose “I can’t find my device model from the list above” on the next screen.
Step 3: Now, there will be three steps mentioned that you must follow to get your phone into the Download mode. The first is to power off the phone. The second is to press and hold the Volume button along with the Home button and Power button. The third step is to press the volume up the option to get into the download mode.
Step 4: Once your phone is in download mode, the program will start downloading the recovery package and then unlock your Android password without factory reset or data loss.
Step 5: You will see that the icon showing “Remove Password Completed” will pop up. This whole process takes only a few minutes to get your work done without any loss of any data.
Part 2: How to unlock Android password without factory reset using Android Device Manager?
With very simple steps and a few minutes at hand, you can get rid of your password using Android Device Manager (ADM). This tool will unlock your password without going for a factory reset and losing data. The main feature of the Android device manager will run through the Google account. The installation of a Google account is very important to run out the Android device manager. The Android device will respond immediately once if the phone is switched on. The connectivity of the internet is a must to find the map on the Tecno Spark 10 5G device. How to unlock Android phone passwords without factory reset? May it be quite interesting to use device manager visuals? The steps are mentioned below:
Step 1. Your Android phone is always linked to your Google account. So first and foremost, on your computer or on another mobile phone, open the site <www.google.com/Android/devicemanager> .
• Now sign in with your Google credentials. Google will start searching for your device. Here you need to choose the Android phone you want to unlock in case it is already not selected.
Power Tools add-on for Google Sheets, 12-month subscription
Step 2. Here you will see three options: “Ring,” “Lock,” and “Erase.” Select the “Lock” option
Step 3. A window will appear where you need to type any temporary password. Do not enter your Google password, and you need not enter the recovery message. Click on “Lock ” again.
Once successful, you will get a confirmation message below the three buttons: Ring, Lock, and the Erase option.
Step 4. On your locked phone, you will see a field asking for your password. Here you can enter your temporary password. Doing so will unlock your device.
Step 5. Now in your unlocked phone, go to Settings and then to Security. Now click on disable to remove the temporary password, and later you change it with a new one.
You have successfully unlocked your device.
Part 3: Unlock Android password using custom recovery and Pattern Password Disable (SD card needed)?
The third way to unlock an Android phone password without a factory reset it using the “custom recovery” technique. To work out this process, you would have to install the custom recovery process. Also, your phone needs to have an SD card. It will be required to send the zip file to the phone since your device is locked. This technique requires access to the Android System folder and rooting your device if not already rooted.
Custom recovery is a usual mechanism in all smartphones. It predicts the troubleshooting techniques and how to process the main configuration with all sequences. Quite interesting, isn’t it?
Follow the following steps to complete and unlock the Android password without a factory reset.
- Step 1. First of all, download a zip file by the name “Pattern Password Disable” to the computer system and then transfer it to your SD card.
- Step 2. Then you would need to insert the SD card into your locked phone and then restart the Tecno Spark 10 5G device in recovery mode.
- Step 3. Next, move on to flash on the zip files to the card and restart. After that, your phone will boot and open up without the locked screen.
Note: Sometimes, the Tecno Spark 10 5G device may ask for a pattern or password. You just need to put in any random pattern/password then it will get unlocked.
Through this easy method, you can now access your Android phone without using a factory reset and losing your valuable data.
The problem of getting your mobile locked and not being able to open it is a common problem on Android phones these days. Many of us tend to panic when such problems arise. However, now that we have given some easy solutions and methods to unlock Android phone passwords without factory reset and losing any data, things would be much easier. Thus, you will solve your problems in no time.
How to Bypass Android Lock Screen Using Emergency Call On Tecno Spark 10 5G?
The main reason why we keep our smartphone locked is to prevent children (or stalkers) checking out our private photos or messages. You don’t want anyone to access your pictures, emails, or other important data. What if you forget your pattern or PIN and cannot access your phone? Or someone changes lock screen pattern to leave you annoyed?
To avoid such types of conditions, we have tried and tested the following methods to bypass the Tecno lock screen pattern, PIN, password, and fingerprint.
It will help you to write dynamic data reports easily, to construct intuitive dashboards or to build a whole business intelligence cockpit.
KoolReport Pro package goes with Full Source Code, Royal Free, ONE (1) Year Priority Support, ONE (1) Year Free Upgrade and 30-Days Money Back Guarantee.
Developer License allows Single Developer to create Unlimited Reports, deploy on Unlimited Servers and able deliver the work to Unlimited Clients.
Method 1. Use ‘Find My Mobile’ feature on Tecno Phone
All Tecno devices come with the “Find My Mobile” feature. To bypass the Tecno lock screen pattern, PIN, password, and fingerprint, you can just follow the below steps to get it done.
- Step 1. First, set up your Tecno account and log in.
- Step 2. Click the “Lock My Screen” button.
- Step 3. Enter a new PIN in the first field
- Step 4. Click the “Lock” button at the bottom
- Step 5. Within a few minutes, it will change the lock screen password to the PIN so that you can unlock your device.
TubeDigger - online video downloader from mostly any site
Method 2. Use Android Device Manager to Bypass Tecno Password
To know how to unlock a Tecno phone lock password with Android device manager, make sure the Android Device Manager is enabled on your device.
- Step 1. Visit google.com/android/devicemanager on other smartphones or PC.
- Step 2. Log into your Google account that you used on your locked device.
- Step 3. Choose the Tecno Spark 10 5G device you want to unlock in ADM interface
- Step 4. Click on the “Lock” option.
- Step 5. Enter a password. There is no need to enter any recovery message. Select “Lock” again.
- Step 6. You would see a confirmation below if it is successful, with “Ring, Lock and Erase” buttons.
- Step 7. Now you must get the password field on your phone where you can enter your new password, and your phone will be unlocked.
- Step 8. Go to lock screen settings on your device and disable the temporary password.
Method 3. Google Login (Supports Only Android 4.4 or Lower)
If your device is still running on Android 4.4 or lower, here’s how to bypass the Tecno lock screen fast.
- Step 1. Enter the wrong pattern for five times
- Step 2. Choose “Forgot Pattern”
- Step 3. Enter your Google account login or backup PIN
- Step 4. Now your phone would be unlocked.
Method 4. ‘Pattern Password Disable’ and Custom Recovery (SD Card needed)
To bypass the Tecno lock screen in this method, you ought to be an advanced user who knows what are “custom recovery” and “rooting”. You have to install any kind of customer recovery, and you should have an SD card on your phone. SD card is required to move a ZIP file to the phone, and it is the only way to transfer the file when the Tecno Spark 10 5G device is locked.
- Step 1. Download a zip file named “Pattern Password Disable” on your computer and move it to the SD card of your Tecno device.
- Step 2. Insert the card on your device
- Step 3. Restart your device into recovery mode.
- Step 4. Flash the file on your card and restart the phone.
- Step 5. Now your phone would boot up without lock screen. Don’t worry if you had a gesture lock or password. All you need to do is to input a random gesture or password, and it will be unlocked.
Method 5. Delete the Password File Using ADB
It is yet another option that will work only when you have enabled USB Debugging previously on your device, and your PC is allowed to connect via ADB. If you meet such requirements, it is ideal to use this method to unlock the Tecno lock screen.
- Step 1. Connect your device to the PC using USB cable and open command prompt in the adb directory. Type the command “adb shell rm /data/system/gesture.key” and then press “Enter”.
- Step 2. Restart your phone, and a secure lock screen must be gone, and you can access your device. Be sure to set a new PIN, pattern, or password before rebooting again.
Method 6. Factory Reset to Bypass Tecno Lock Screen
A factory reset is the best option in almost any case if one of these solutions couldn’t work. According to your device type, the process may vary. In most devices, you have to turn off the Tecno Spark 10 5G device completely to start the process. But this method will delete all the precious data on the Tecno Spark 10 5G device after the factory reset.
- Step 1. Hold the power button and volume down at the same time. It will open the Bootloader menu.
- Step 2. Press the volume down button two times to choose “Recovery Mode” and select it by pressing the “Power” button.
- Step 3. Hold down the power button and tap “Volume Up” once, and you would enter “recovery” mode.
- Step 4. Choose “Wipe Data/Factory Reset” option by using volume buttons.
- Step 5. Select it by pressing the Power button.
- Step 6. Select “Reboot System Now” once the process is done.
Backup your Tecno phone regularly in case of any data loss in the future.
Method 7. Boot into Safe Mode
Chances may be that you are using a third-party lock screen app. Then lucky for you, this way works best to bypass the Tecno lock screen. Specifically, you can boot your Tecno device into Android Safe Mode .
- Step 1. Open up the Power menu from the lock screen and press and hold the “Power Off” option.
- Step 2. It will ask if you want to boot in safe mode. Tap “OK”
- Step 3. Once the process finishes, it will temporarily disable the lock screen activated by the third-party app.
- Step 4. Uninstall the third-party lock screen or just reset the data.
- Step 5. Reboot your device and get out of safe mode.
- Step 6. Now the irritating lock screen app is removed completely.
Power Tools add-on for Google Sheets, 12-month subscription
Method 8. Other Methods
- Step 1. Take your friend’s phone to call on your locked phone.
- Step 2. Accept the call and press the back button without disconnecting.
- Step 3. Now you can access the Tecno Spark 10 5G device completely
- Step 4. Go to the security settings of the Tecno Spark 10 5G device and remove the pattern or pin.
- Step 5. It will ask you the correct pin that you don’t know, guess, and try various combinations you can recall.
To avoid forgetting your password or PIN next time, be sure to write the pattern or numbers on a text file or paper to keep them safe. If you have to bypass the Tecno lock screen pattern, PIN, password, and fingerprint, you may consider using Dr.Fone - Screen Unlock (Android). It is a professional tool that can remove all the fingerprints, pattern, and password lock screens without losing any data on your phone.
- Title: How to Unlock Tecno Spark 10 5G Phone with Broken Screen
- Author: Marry
- Created at : 2024-08-17 04:13:08
- Updated at : 2024-08-18 04:13:08
- Link: https://unlock-android.techidaily.com/how-to-unlock-tecno-spark-10-5g-phone-with-broken-screen-by-drfone-android/
- License: This work is licensed under CC BY-NC-SA 4.0.