How to Unlock Tecno Spark 20 Phone Password Without Factory Reset?

You always set up some sort of lock to secure your smartphone to stop others from checking your phone data, messages, or pictures. More importantly, it is needed to deny admission to your valuable phone data in case it gets stolen. However, many times you come across this situation where your Android phones are stuck as you cannot unlock the password. Either your children have been playing with the lock patterns, and the screen gets locked due to entering the wrong password many times, or you have unexpectedly forgotten your password. Or somebody else has reset your password, or you have broken your mobile screen, and you cannot enter your password. Many similar situations may arise.

You are in the middle of some things, and you want to make some urgent calls. How to unlock Android phone passwords without a factory reset? What do you do then? There are very easy solutions to this that would help unlock your Android phone in no time without going for the factory reset and losing your valuable data.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Part 1: How to unlock Android password without factory reset using Dr.Fone - Screen Unlock?

Whether you have a pattern or PIN or fingerprint as a password, you can remove any type of password by using the Dr.Fone - Screen Unlock. The only defect is that your data will be wiped out after unlocking the phone successfully. It helps in removing the lock screen on Android phones. Now, if you are thinking about how safe it is, let me assure you that the process is very safe and simple, with no risk of data leakage. This process is supported by most Samsung and LG smartphones without data loss, and you just need to connect your handset to let the Dr.Fone - Screen Unlock start the procedure.

safe & secure

Dr.Fone - Screen Unlock (Android)

Get into Locked Android Phones without Factory Reset

4 screen lock types are available: pattern, PIN, password, fingerprints, face ID, etc.
Support 20,000+ mainstream models of Android phones & tablets.
Save you from ending up with a locked phone after too many wrong attempts.
Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

Follow the following steps to unlock your Android password without factory reset using Dr.Fone.

Step 1: Firstly, install and run Download Dr.Fone –Screen Unlock on your computer. And connect your Android phone to your computer with a USB cable > download.

Step 2: After that, select the phone model from the list or choose “I can’t find my device model from the list above” on the next screen.

Step 3: Now, there will be three steps mentioned that you must follow to get your phone into the Download mode. The first is to power off the phone. The second is to press and hold the Volume button along with the Home button and Power button. The third step is to press the volume up the option to get into the download mode.

Step 4: Once your phone is in download mode, the program will start downloading the recovery package and then unlock your Android password without factory reset or data loss.

Step 5: You will see that the icon showing “Remove Password Completed” will pop up. This whole process takes only a few minutes to get your work done without any loss of any data.

Part 2: How to unlock Android password without factory reset using Android Device Manager?

With very simple steps and a few minutes at hand, you can get rid of your password using Android Device Manager (ADM). This tool will unlock your password without going for a factory reset and losing data. The main feature of the Android device manager will run through the Google account. The installation of a Google account is very important to run out the Android device manager. The Android device will respond immediately once if the phone is switched on. The connectivity of the internet is a must to find the map on the Tecno Spark 20 device. How to unlock Android phone passwords without factory reset? May it be quite interesting to use device manager visuals? The steps are mentioned below:

Step 1. Your Android phone is always linked to your Google account. So first and foremost, on your computer or on another mobile phone, open the site <www.google.com/Android/devicemanager> .

• Now sign in with your Google credentials. Google will start searching for your device. Here you need to choose the Android phone you want to unlock in case it is already not selected.

Step 2. Here you will see three options: “Ring,” “Lock,” and “Erase.” Select the “Lock” option

Step 3. A window will appear where you need to type any temporary password. Do not enter your Google password, and you need not enter the recovery message. Click on “Lock ” again.

Once successful, you will get a confirmation message below the three buttons: Ring, Lock, and the Erase option.

Step 4. On your locked phone, you will see a field asking for your password. Here you can enter your temporary password. Doing so will unlock your device.

Step 5. Now in your unlocked phone, go to Settings and then to Security. Now click on disable to remove the temporary password, and later you change it with a new one.

You have successfully unlocked your device.

Click here

Part 3: Unlock Android password using custom recovery and Pattern Password Disable (SD card needed)?

The third way to unlock an Android phone password without a factory reset it using the “custom recovery” technique. To work out this process, you would have to install the custom recovery process. Also, your phone needs to have an SD card. It will be required to send the zip file to the phone since your device is locked. This technique requires access to the Android System folder and rooting your device if not already rooted.

Custom recovery is a usual mechanism in all smartphones. It predicts the troubleshooting techniques and how to process the main configuration with all sequences. Quite interesting, isn’t it?

Follow the following steps to complete and unlock the Android password without a factory reset.

Step 1. First of all, download a zip file by the name “Pattern Password Disable” to the computer system and then transfer it to your SD card.
Step 2. Then you would need to insert the SD card into your locked phone and then restart the Tecno Spark 20 device in recovery mode.
Step 3. Next, move on to flash on the zip files to the card and restart. After that, your phone will boot and open up without the locked screen.

Note: Sometimes, the Tecno Spark 20 device may ask for a pattern or password. You just need to put in any random pattern/password then it will get unlocked.

Through this easy method, you can now access your Android phone without using a factory reset and losing your valuable data.

The problem of getting your mobile locked and not being able to open it is a common problem on Android phones these days. Many of us tend to panic when such problems arise. However, now that we have given some easy solutions and methods to unlock Android phone passwords without factory reset and losing any data, things would be much easier. Thus, you will solve your problems in no time.

The Ultimate Guide to Tecno Spark 20 Pattern Lock Screen: Everything You Need to Know

Do you want to revamp your phone’s pattern lock screen and give it a new life? Well, you are not the only one! Lots of Android users keep looking for numerous ways to change their screen lock pattern and make it more secure. After all, if your lock screen pattern is strong, then it will certainly keep an intruder away. In today’s world, our privacy is everything and we should take every needed measure to protect it. To help you do the same, we have come up with this informative guide. Read on and learn how to set up a strong pattern lock screen on your device and what to do if you have forgotten it.

Part 1: How to set up Pattern Lock Screen on Tecno Spark 20?

Out of all the provided options for screen locks, pattern lock is mostly used due to its ease of access and added security. If you haven’t set up a screen lock pattern on your device, then we recommend you to do the same right away. Not only will it keep intruders away, it will also protect your privacy. To learn how to set up a lock screen pattern on an Android device, simply follow these steps:

1. Firstly, unlock your device and go to its Settings. You can access it from the Home Screen or from its Notification Center.
2. Under the personal or privacy section, you can access the “Lock Screen and Security” option.
3. In some versions, the option is also listed right at the top of the settings (in its quick access).

4. To set up a pattern lock screen, tap on the “Screen lock type” feature.
5. This will provide a list of all the different kinds of locks that you can apply. Ideally, it would be password, pin, pattern, swipe, or none. In “Swipe”, you can unlock a device just by swiping the screen. Whereas, in pattern, pin, or password, you would be needed to provide the respective pattern/pin/password to unlock the Tecno Spark 20 device.
6. We recommend setting up a lock screen pattern instead. To do this, tap on the “Pattern” option.

7. From the next screen, you can simply draw any kind of pattern of your choice. Ideally, it should join at least 4 dots on the screen. We recommend using a strong screen lock pattern to provide unmatched security to your device.
8. Furthermore, you need to confirm your choice and provide the same pattern once again. Make sure that you draw the same pattern here.
9. Additionally, the interface will ask you to provide a security pin as well. In case if you will forget your pattern, then you can access your phone by taking the assistance of this pin.

10. Similarly, you would be required to confirm the pin as well to finish the setup.
11. That’s it! By completing these steps, a screen lock pattern will be implemented on your device.

Later, you can follow the same drill to change your device’s lock screen pattern as well. Though, you would be needed to provide the existing pattern to access these features. Out of all the lock screen options, you should go with the pattern lock. Not only it is the most accessible option, it also provides fast results with an added security.

Part 2: What to do if you forget Android pattern lock?

After following the above-mentioned tutorial, you would be able to set up a pattern lock screen on your device. Since it is recommended to have a strong pattern lock, users often forget their pattern lock after implementing it. This prohibits them from using their own Android device. If you have a similar experience, then don’t worry. There are plenty of ways to unlock a device and remove its pattern lock without causing any harm to the system. Visit our informative tutorial and learn different ways to unlock or bypass the Android pattern lock screen.

Out of all the provided options, it is recommended to use Dr.Fone - Screen Unlock (Android) . It provides fast and reliable results without getting rid of your device’s content. The tool is a part of the Dr.Fone toolkit and is already compatible with all the leading Android smartphones. By following its simple click-through process, you can unlock the screen lock pattern on your device in no time. Although this tool can help you keep all data after unlocking screen passcode on your Samsung or LG phone, it will wipe all data after unlocking other Android phone including Huawei, Oneplus and so on.

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

It can remove 4 screen lock types - pattern, PIN, password & fingerprints.
Only remove the lock screen, no data loss at all.
No tech knowledge asked, everybody can handle it.
Work for Samsung Galaxy S/Note/Tab series, and LG G2, G3, G4, etc.

4,820,695 people have downloaded it

Part 3: Top 10 Hardest pattern lock ideas for Android

Your pattern lock is one of the most important security aspects on your device. Anyone can access your phone after decoding your pattern lock. Needless to say, if you have a simple pattern lock on your device, then it can easily be accessed by someone else. To help you set up a strong pattern lock screen, we have handpicked some of the hardest combinations. Have a look at these lock screen pattern combinations and choose the one you like the most!

For your convenience, we have marked the dots as 1-9. This will help you know the exact sequence of the lock.

1

8 > 7 > 4 > 3 > 5 > 9 > 6 > 2 > 1

2

7 > 4 > 1 > 5 > 2 > 3 > 8 > 6

3

1 > 8 > 3 > 4 > 9

4

7 > 4 > 2 > 3 > 1 > 5 > 9

5

2 > 4 > 1 > 5 > 8 > 9 > 6 > 3 > 7

Click here

6

8 > 4 > 1 > 5 > 9 > 6 > 2 > 3 > 7

7

7 > 2 > 9 > 4 > 3 > 8 > 1 > 6 > 5

8

5 > 7 > 2 > 9 > 1 > 4 > 8 > 6 > 3

9

1 > 5 > 9 > 4 > 8 > 2 > 6 > 3 > 7

10

7 > 5 > 3 > 4 > 2 > 6 > 1 > 9

After selecting and setting up a new screen lock pattern on your device, make sure that you remember it. You can lock and unlock your phone a few times with your new pattern lock in order to memorize it. Nevertheless, if you forget your lock screen pattern, then you can take the assistance of Dr.Fone Android Pattern Lock Removal to get an instant solution.

Now when you know every essential thing about pattern lock screen on Android, you can certainly keep your device safe from any unforeseen intrusion. A strong lock screen pattern will certainly be of a great use to you. It will protect your apps, data, and device accessibility in an effortless manner. Go ahead and set up a strong and secure pattern lock screen on your device and provide an added layer of security to it.

How to Unlock Tecno Spark 20 Phone with Broken Screen

Seeing as the only way to control your Tecno Spark 20 deviceis the touch screen, a broken device can cause you a lot of worries. Most people think that there is no way to get their device to work again let alone be able to unlock it if the screen is broken or cracked . It is, however, important to find a way to unlock the broken device so that you can gain access to your data and create a backup to restore to a new device.

In this article, we are going to look at a few simple ways you can unlock an Android device with a broken screen.

Here is a video for you to learn how to unlock Android phone or access phone with broken screen:

Method 1: Using Android Debug Bridge (ADB)

For this method, you will need your device and access to a PC. It is the most powerful method to unlock a broken Android device. It will however only work if you have enabled USB debugging on your android phone. If you haven’t, skip this method and see if method 2 or 3 might be of help.

ADB creates a bridge between the PC and your device which can then be used to unlock the Tecno Spark 20 device. Here’s how to use this bridge.

Step 1: Download the Android SDK package on your PC. You can download it here: http://developer.android.com/sdk/index.html . Extract the ZIP file on your PC.

Step 2: Download the necessary drivers for your device. The USB drivers for your device can be found on the manufacturer’s website.

Step 3: Launch Command Prompt on your PC and change the location of the ADB file. Type in the following into Command Prompt; cd C:/android/platform-tools

Step 4: Connect the Tecno Spark 20 device to your PC using USB cables. Enter the command “ ADB _device_” (without quotation marks). If your phone is recognized, you will see numbers in the Command Prompt message.

Step 5: Type in the following two commands. You will need to type in the second one immediately after the first. Replace 1234 with your password.

ADB shell input text 1234
Shell input key event 66

Step 6: Your phone will now be unlocked and you can proceed to back up its contents.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Phones Without Android Factory Reset Codes

It enables your Android phones to get safe, simple, and trustful after reset.
It is still helpful even though you don’t know the OS version of your devices.
Everybody can handle it without any technical background.
Provide specific removal solutions to promise good success rate.

4,008,670 people have downloaded it

Method 2: Using a USB Mouse and the On the Go Adapter

This is a great solution if you don’t have USB debugging enabled on your device. You will need your device, an OTG adapter and a USB mouse. It involves connecting the Tecno Spark 20 device to the USB mouse using the OTG adapter. Check if your device can be connected to a USB mouse. You can find an OTG adapter online, they are relatively inexpensive and very useful.

Before we begin, it is a good idea to ensure your device is sufficiently charged because the Mouse may drain your battery.

Step 1: Connect the Micro USB side of the OTG adapter to your device and then plug in the USB mouse to the adapter.

Step 2: As soon as the Tecno Spark 20 devices are connected, you will be able to see a pointer on your screen. You can then use the pointer to unlock the pattern or enter the Tecno Spark 20 device’s password lock.

Click here

You can then go about backing up the contents of your device.

Method 3: Using your Samsung Account

This method is a reliable way to unlock a Samsung device that has a broken screen or is not working correctly. While it is highly effective you will need to have a Samsung account registered with your device. The problem is that not many Samsung device users have registered their devices with the service. If you are among the lucky few who have, here’s how to use your account to unlock your device.

Step 1: Visit the https://findmymobile.samsung.com/login.do on your PC or any other device and log in with your account information.

Step 2: Select your device from the menu on the left-hand side of the screen.

Step 3: You should see the option “Unlock my screen” on the sidebar. Click on it and you will get instructions on how to access your device.

Conclusion

Being unable to unlock your device is never a good place to be. We hope one of the above solutions will work for you. You can then gain access to your device and back up the files and contacts. This way your life doesn’t have to be disrupted- you can just restore the backup on a new device or the old one once the screen is fixed.