How to Use Google Assistant on Your Lock Screen Of Tecno Spark 20 Pro Phone

Android has undergone numerous changes to enhance user experience and security. One notable feature that was once present was the ability to unlock phones with voice Google Assistant. However, Google Assistant has removed this feature across all versions since 2021.

While this voice-unlocking feature is no longer available, there are still many things you can do with Google Assistant, even when the Tecno Spark 20 Pro device is locked. This tool brings an added layer of convenience to your smartphone experience.

Let’s dig deeper into how you can use Google Assistant on the lock screen and make the most out of this tool in the following article.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Part 1. What You Can Do With Voice Google Assistant

Google Assistant is a virtual assistant powered by artificial intelligence (AI) developed by tech giant Google. This application is readily available on most recent mobile phone models, especially those operating on Android 6.0 and newer versions.

Although you can no longer use the Google Assistant unlock feature, you can still perform a myriad of tasks using Google Assistant. These include:

Getting the weather
Setting alarms
Playing music
Sending texts
Making a call
Asking Google for information, etc.

Enable Google Assistant on Lock Screen: A Step-by-Step Guide

Now that you’re eager to try the potential of Google Assistant on your lock screen, let’s walk through the simple steps on how to enable this tool.

Step 1: Open Google Assistant:

Look for “Google Assistant” and open the app.

Step 2: Ask Google Assistant to open the settings.

You can ask, “Hey Google, open the Google Assistant settings,” and it will show you the Google Assistant settings.

Step 3: Allow Google Assistant on the lock screen.

Locate the “Lock Screen” settings and make sure to switch on “Assistant responses on lock screen.”

Part 2. How To Use Google Assistant on Lock Screen

After you’ve successfully enabled Google Assistant on your lock screen, let’s see how to use Google Assistant to do certain tasks more efficiently and hands-free.

Step 1: Wake Up Google Assistant

Start by waking up Google Assistant. You can do this by saying the wake word “Hey Google” or “OK Google.” If it doesn’t work, you can long-press the home button or use any dedicated gesture to activate Google Assistant.

Step 2: Issue a Voice Command

Once Google Assistant is active, issue a voice command related to the task you want to perform. For example:

“Hey Google, what’s the weather today?”

“OK Google, set an alarm for 5 PM.”

“Hey Google, play my Spotify playlist.”

When you can still unlock with Google Assistant, you can ask it to “unlock my phone” or use any similar command.

Step 3: Interact with Responses

Google Assistant will then provide spoken responses and display relevant information on the lock screen. For instance, if you ask for the weather, it might verbally provide the current conditions and display a brief summary on your lock screen.

Part 3. Common Problems When Using Google Assistant

Unable to use Google Assistant to unlock phone is not the only drawback that users may have encountered in recent changes. Although Google Assistant on the lock screen presents a revolutionary way to interact with your phone, like any technology, it also comes with its share of challenges. Some of the common problems when using Google Assistant are:

Misunderstandings and misinterpretations

One prevalent issue users encounter is Google Assistant misunderstanding or misinterpreting voice commands. This can be influenced by factors such as background noise, accent variations, or pronunciation differences.

Limited context understanding

While Google Assistant is adept at understanding individual commands, it may struggle with complex, multi-step requests that rely heavily on context. Break down your tasks into simpler commands to enhance comprehension and execute it more accurately.

Inability to execute certain tasks

Google Assistant’s capabilities are extensive, but there are instances where it may struggle to execute specific tasks. For example, it can’t execute tasks that involve interacting with certain third-party applications or services. You can’t also unlock phone with voice Google Assistant.

Tips to Make Voice Google Assistant Recognize Your Commands

One of the most infuriating problems with voice Google Assistant is that users often encounter difficulties in having their commands accurately recognized. To enhance the accuracy of voice recognition with Google Assistant, you can consider implementing the following tips:

Speak Clearly and Naturally

Make sure that you speak in a clear and natural manner. Avoid mumbling or speaking too quickly. Enunciate your words, giving Google Assistant a better chance to interpret your commands accurately.

Use Simple and Direct Phrases

Keep your commands simple and direct. Avoid unnecessary elaboration or complex sentence structures. Google Assistant is more likely to understand straightforward commands.

Check Your Microphone

Ensure that your device’s microphone is in good working condition. Dirt or debris on your phone’s microphone can affect its performance. Clean the microphone area and try again.

Quiet Environment

Background noise can interfere with voice recognition. Try to issue commands in a quiet environment to minimize any potential confusion caused by external sounds.

Part 4. How to Unlock Android Phone Screen Without Passcode

Now, you know that you can’t unlock phone via Google Assistant anymore. But what if you accidentally forget your phone’s passcode? Is there a reliable method to regain access to your Android device without the passcode?

Fortunately, Wondershare Dr.Fone offers a straightforward solution for precisely such scenarios. It provides a simple and effective way to unlock your Android phone screen through Dr.Fone - Screen Unlock when the screen lock is forgotten or becomes inaccessible.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Solve Your Screen Locks

Completely unlinked from the previous Google account, it won’t be traced or blocked by it anymore.
Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
Compatiable with various Android models.
Provide specific removal solutions to promise good success rate.

4,008,670 people have downloaded it

If you are wondering how to unlock your Android phone screen without a passcode with Dr.Fone – Screen Unlock, follow the steps below.

Step 1: Launch the Screen Unlock Tool

Open the latest version of Wondershare Dr.Fone on your computer and connect your phone device using a USB cable. Once connected, navigate to the Toolbox > Screen Unlock to access Dr.Fone – Screen Unlock tool.

Step 2: Select Android for your device type.

As the Dr.Fone Screen Unlock tool supports both Android and iOS, you will need to indicate the specific device you are using. Opt for the Android option if you are unlocking an Android device. Then, continue to choose “Unlock Android Screen” on the next screen.

Step 3: Remove Screen Lock Without Data Loss
In this step, you will be directed to select your device brand. Choose the Android device brand you are using and opt for “Remove without Data Loss” if you don’t want to lose your data.

Step 4: Define Device Details

Next, make sure to check and confirm the Brand, Device Name, and Device Model to unlock your Android screen. Tick the checkmark that says you agree with the warning and are ready to proceed. Click “Next” to unlock your screen.

Step 5: Confirm to Unlock Screen

Type “000000” continue by clicking Confirm.

Step 6: Put Android in Download Mode

Dr.Fone will then guide you to put your Android device into Download Mode according to the model you have identified. After you have followed the instructions, Dr.Fone will automatically lead to the next screen to proceed the unlocking process.

After that, you can monitor the progress and wait for a few minutes until it shows “Unlocked successfully.”

You May Also Interested:

Unlocking Your Realme Phone Made Easy: Step-by-Step Guide

8 Safe and Effective Methods to Unlock Your iPhone Without a Passcode

Complete Guide to Unlock Mi Account Without Password In 2024

Conclusion

Google Assistant is a versatile virtual assistant that is designed to help you with a wide range of tasks and make your daily life more convenient. Accessible on most modern Android devices, it enables users to perform several tasks through voice commands.

However, if you are looking for ways to unlock phone with Google Assistant, this function is no longer available. Google Assistant unlock feature has been discontinued since 2021. But in case you’ve forgotten the screen lock passcode, you can use Wondershare Dr.Fone Screen Unlock tool to regain access to your Android phone. This tool facilitates the unlocking process without data loss, featuring a user-friendly learning curve.

How to Reset a Tecno Spark 20 Pro Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Tecno Spark 20 Pro phone that is locked, or how to get into a locked Tecno Spark 20 Pro phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Tecno Spark 20 Pro Phone that is locked?

Before you go to reset your locked Tecno Spark 20 Pro phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Tecno Spark 20 Pro phone typically involves performing a factory reset. The process erases all data and settings on the Tecno Spark 20 Pro device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Tecno Spark 20 Pro , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Tecno Spark 20 Pro Phone That is Locked With Google Find My Device?

Resetting a locked Tecno Spark 20 Pro phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Tecno Spark 20 Pro phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Tecno Spark 20 Pro phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Tecno Spark 20 Pro phone that is locked without a password?

In order to reset your Tecno Spark 20 Pro phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Tecno Spark 20 Pro phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Tecno Spark 20 Pro Phone That Is Locked Without a Password!

Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
Work for forgotten passwords, second-hand Tecno Spark 20 Pro devices, etc.
Everyone can handle the lock screen without any tech knowledge.
Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Tecno Spark 20 Pro phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Tecno Spark 20 Pro .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Tecno Spark 20 Pro device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Tecno Spark 20 Pro Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Tecno Spark 20 Pro phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Tecno Spark 20 Pro phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Tecno Spark 20 Pro Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Tecno Spark 20 Pro device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Tecno Spark 20 Pro phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Tecno Spark 20 Pro phone with Gmail ID and password

It is imperative to understand that unlocking your Tecno Spark 20 Pro Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Tecno Spark 20 Pro phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Tecno Spark 20 Pro device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Tecno Spark 20 Pro. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Tecno Spark 20 Pro phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Tecno Spark 20 Pro phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

Universal Unlock Pattern for Tecno Spark 20 Pro

Why do you use a mobile password or pattern to lock your phone? Of course, you want to keep your personal information private from prying eyes. Have you ever been in a position where you recently changed your pattern lock or password code but then forgot it? We’ll talk about how to unlock your Android phone’s universal pattern lock.

We’ve recently received many feedback and questions from users who want to use a pattern unlock on their device. Whether you’ve forgotten your Android device’s password or want to gain access to someone else’s phone, there are a number of ways to figure out how to unlock a pattern on an Android phone. This comprWe’llhensive guide wi show you how to unlock patterns in six ways.

Part 1: Common universal unlock pattern for Tecno Spark 20 Pro

Today, many mobile phone users present a simple lock pattern that isn’t particularly strong or difficult to detect. That is something that many of us are guilty of. Lock patterns were intended to take the place of traditional passwords, however, we frequently forgo security in favor of easier lock patterns. Let’s look at some of the most frequent pattern locks in use today.

Patterns from the Upper Left Corner: It’s estimated that 44% of people begin their patterns from the upper left corner.
Other Corners: According to research, around 77 percent of users begin their patterns in one of the remaining three corners.
Nodes: It was discovered that many users only utilized five nodes. While a larger number of individuals used 4 nodes.
Letter Patterns: According to a study, around 10% of lock patterns are in the form of an alphabet. Some users just use the initial of their name.

Part 2: [Easiest] Universal way to Unlock Pattern for Tecno Spark 20 Pro

If you want the easiest method to unlock an Android phone, then Dr.Fone - Screen Unlock (Android) is an amazing choice. It is a tool that allows you to unlock your phone without much hassle. You can use it for universal pattern lock for MI, or other phones.

If you need to unlock a pin, pattern, password, fingerprint, or any other type of lock on an Android smartphone, Dr.Fone - Screen Unlock is the tool to use. It is a highly useful and sophisticated tool that allows you to bypass your device’s lock screen without harming it or erasing its contents (if your phone is not a Samsung or LG, the data will be erased after unlocking the screen).

Dr.Fone - Screen Unlock (Android)

Remove Android lock screen in 5 minutes

On Android, disable all patterns, PINs, passwords, and fingerprint locks.
Bypass Android FRP lock without a PIN or Google account.
During the unlocking process, no data is lost or hacked.
On-screen instructions are simple to follow.
Mainstream Android devices are supported.

3,291,332 people have downloaded it

Know how do you use Dr.Fone - Screen Unlock (Android) to unlock a pattern lock

Step 1: Download and run Dr.Fone – Screen Unlock to unlock your phone’s pattern. Select the “Screen Unlock” option from the home screen.

Step 2: Make sure your device is connected to the system. Select “Android” to continue, then click the “Unlock Android Screen” button once it has been recognized.

Step 3: On the next screen, choose the correct model and other information of your device.

Step 4: Now, turn your phone into download mode. Turn it off and simultaneously hit the Home, Power, and Volume Down keys. Then, on your device, hit the Volume Up key to enter Download Mode.

Step 5: Relax while downloading the recovery software and completing the necessary steps to unlock your handset.

Step 6: Click on “Remove Now” button and the unlocking process will begin.

Step 7: When the process is finished, you will be alerted. Simply unplug your device and use it without a password or pattern lock.

safe & secure

Part 3: Other ways to Unlock Pattern for Android

There are other ways to unlock the universal unlock patterns for Android. We have mentioned some of them below.

Way 1: Remove Gesture File Using ADB

The first method is ADB, which stands for Android Debug Bridge. With the help of this, you can unlock your Android’s universal unlock pattern without the need of a factory reset. However, the process may seem a bit time-consuming to you. Here is how you can do it.

Step 1: Open your PC and head to Android Developer’s site . Download ADB now.

Step 2: Launch it now and install the packages on your PC.

Step 3: Connect your Android to PC now. Before that, make sure to enable USB Debugging. If you don’t know-how, simply head to the “Settings”> “About Phone” and tap on “Build Number” 7 times. This will enable the Developer’s Options.

Step 4: Now go to the Developer Options menu and turn on the USB Debugging.

Step 5: After connecting Android to PC, you need to open the command prompt in the installation directory.

Step 6: Run the following command and press Enter key: adb shell rm /data/system/gesture.key

In regular mode, restart the phone. The pattern will be requested. However, any pattern will unlock the screen.

Way 2: Boot into Safe Mode to Bypass Third-Party App Screen Lock

It’s one of the most straightforward ways to get past the lock screen. One thing to note is that this method is effective only if the lock screen is a third-party app rather than the standard one.

Step 1: Firstly, long-press the Power button to get the power menu.

Step 2: Now, long tap the “Power Off” button and click “OK” when shown the pop-up.

Step 3: This will restart your device in safe mode.

Step 4: This will turn off the third-party lock screen for the time being. Clear the lock screen app’s data, uninstall it, and then reboot to exit safe mode.

Way 3: Unlock Pattern Lock via Factory Reset

This should only be a last option because it will completely delete your device’s data and saved settings. Your device will be reset to factory settings, meaning your device’s settings will get back to the same as when you first bought it. If you want to learn how to unlock a pattern by doing a factory reset, follow these steps:

Step 1: Long press the Home, Power and Volume Up keys to Recovery Mode.

Please note that the Recovery mode method may vary from device to device. So please ensure to check the key combination before you do it.

Step 2: Now go to the “wipe data/factory reset” option using the volume keys. To confirm it, press the Power key.

Step 3: Now, again, confirm the process using the same keys.

Step 4: The phone will perform the factory reset. In a short while, restart your device and there will be no lock screen.

Way 4: Unlock Pattern Lock with Android Device Manager

Android Device Manager unlocking is the second-best service for bypassing the Android lock screen on locked Android devices and tablets. Working on this service is quite straightforward, and it only works if the user has a Google account. This service is accessible and usable from any device or computer.

There are a few things to keep in mind as you use this service to get around the lock screen. If the Android device is compatible, the Android Device Manager will connect it after a few tries. After it has been connected to the Tecno Spark 20 Pro device, we can begin by pressing the “Lock” button.

After pressing the “Lock” button, a popup will appear, asking for a new password to replace the forgotten pin, pattern, or password.

Type the new password once, then confirm it by typing it again. This will change the password in a few minutes and the new password can be used to unlock the Tecno Spark 20 Pro device.

Way 5: Use Forgot Pattern Feature [Android 4.4 Version and Earlier]

If you use an older Android version, you can get rid of the universal unlock pattern by forgot pattern feature. On earlier Android devices, this feature is enabled by default. After a few failed attempts, the warning “Try again in 30 seconds” appears and here is where the steps begin. Let us get to know in detail.

Step 1: Simply enter wrong pattern too many times until try again in 30 seconds warning comes.

Step 2: Select the “Forgot Pattern” option below the message.

Enter the primary Gmail account and password you used to set up your Android smartphone after selecting the same. Then you must provide your Google account information. A new unlock pattern will be emailed to you by Google.

Conclusion

Universal unlock patterns allow you to unlock your phone easily when you think you have forgotten. Well, numerous patterns allow you to unlock the Android. You can choose either of the above to unlock your android phone. If you have failed to use any pattern, you can easily unlock your Android by Dr.Fone - Screen Unlock (Android) . It will let you access yours by unlocking it hassle-free.