7 Ways to Unlock a Locked ZTE Blade A73 5G Phone

“How to get into a locked phone? I have been locked out of my Android device and lost my passcode!”

If you are also facing the same issue, then you have come to the right place. There are plenty of ways to learn how to get into a locked Android phone when it comes to Android devices. From using a third-party tool to Google’s native solution – the sky is the limit. This post will make you familiar with different ways to unlock a device without knowing its passcode. Read on and learn how to get into a locked Android device.

safe & secure

Part 1: How to get into a locked phone with Dr.Fone?

Dr.Fone - Screen Unlock (Android) provides a hassle-free solution to unlock an Android device in minutes. It can remove a device’s PIN, password, pattern, and even fingerprint security without causing any harm to it. Therefore, you would be able to unlock your device without losing your data while using some Samsung or LG Android phones. If you want to break the locked screen with Dr.Fone from other brand phones, including iPhone, Huawei, and Oneplus, it will wipe out your phone’s data after unlocking successfully.

Dr.Fone - Screen Unlock (Android)

Get into Locked Phones within Minutes

• 5 screen lock types are available: pattern, PIN, password, fingerprints & Face ID.
• Easily remove the lock screen; No need to root your device.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

To learn how to get into a locked phone using Dr.Fone, follow these steps:

• Step 1. Go to the official website of Dr.Fone - Screen Unlock (Android) and download the tool on your computer. After installing it, launch the interface and click on the option of “Screen Unlock” from the home screen.

Click here


• Step 2. Connect your Android device to the computer. Click “Android” > “Unlock Android Screen” and select the ZTE Blade A73 5G device brand on the list. If your device is listed in the supported list , you can unlock locked phone without data loss.

• Step 3. Now, you need to put your Android device in Download mode. To do this, you need to turn your device off by pressing the Power button. Afterward, press the Home, Power, and Volume Down buttons together. After a while, let go of these buttons and press the Volume Up button to enter the Download Mode.

• Step 4. As soon as your device is not in the Download Mode, Dr.Fone will automatically start downloading its respective recovery packages.
• Step 5. Sit back and wait as the application downloads the package and performs the required steps to unlock your device. In the end, it will notify you by displaying the following message.

That’s it! By following these steps, you would be able to learn how to get into a locked Android phone without losing any data.

Tips: Cannot find your device model in the supported list or your phone is not Samsung? Worry not, as Wondershare Dr.Fone can also help you to unlock other device models (inlcluding Huawei, LG, Xiaomi, etc) in a matter of seconds. Just install this tool on your computer and connect your phone to start the unlock process!

Part 2: How to get into a locked phone with Android Device Manager?

Google’s Android Device Manager (also known as Find My Device) can be used to locate a lost phone, erase it remotely, ring it, and change its lock. You can access it from any other device and use its features remotely.

• Step 1. Firstly, go to the Android Device Manager’s website right here . Log in with the Google account that is already linked to your Android device.
• Step 2. Once the interface is loaded, you can select your phone. It will locate the ZTE Blade A73 5G device automatically and provide various options.

• Step 3. Choose the “Lock” option to proceed.
• Step 4. This will display a new prompt. From here, you can get the new password for your device and confirm it.

• Step 5. Additionally, if your device is lost, you can display an optional message and contact number on the lock screen. Click on the “Lock” button to save changes and exit the screen.

Part 3: How to get into a locked phone with Samsung Find My Mobile?

If you are using a Samsung device, you can also use its Find My Mobile service to unlock your device remotely. It is an excellent tool that can be accessed remotely and perform a wide range of operations that can be performed on the ZTE Blade A73 5G device. Follow these easy instructions to learn how to get into a locked Android Samsung device.

• Step 1. Open Samsung’s Find My Mobile website right here on any device of your choice.
• Step 2. Login using the credentials of the Samsung account linked to your existing device that is needed to be unlocked.
• Step 3. On its dashboard, you can access various features associated with your device. If you have multiple devices linked to your account, you can select it from the top-left panel.

• Step 4. From the provided options on the left panel, click on the “Unlock My Screen” option.
• Step 5. Click on the “Unlock” button again to move past the lock screen of your device.

• Step 6. After waiting for a while, you will get the following prompt. From here, you can set up a new lock for your mobile or can click on the “Lock My Screen” option to do the same.

Part 4: How to get into a locked phone using the ‘Forgot Pattern’ feature?

If your device is based on Android 4.4 and earlier versions, you may also use its native “Forgot Pattern” feature to unlock it. Though, you should have access to the Google account credentials linked to the ZTE Blade A73 5G device beforehand. To learn how to get into a locked phone with this technique, follow these steps:

• Step 1. To get the Forgot Pattern option, enter the wrong PIN/pattern on your device.
• Step 2. This will display the “Forgot Pattern” button on the bottom of the screen. Just tap on it to continue.

• Step 3. On the next screen, you can unlock your device by providing the backup PIN of your device or sign in using the Google credentials of the account linked to the ZTE Blade A73 5G device.

• Step 4. After bypassing this feature, you can unlock your device and set up a new PIN or pattern.

Part 5: How to get into a locked phone by factory reset?

If nothing else seems to work, then you can also choose to factory reset your device. Even though this will unlock your device, it would also erase its content and saved settings. To know how to get into a locked Android phone, follow these steps:

• Step 1. Turn off your device by pressing the Power button.
• Step 2. Now, you need to put your device into recovery mode. This can be done by applying the correct key combinations, which can differ from one device to another. Some common combinations are: Volume Up + Home + Power, Home + Power, Volume Up + Power + Volume Down, and Volume Down + Power button.
• Step 3. Once your phone has entered the recovery mode; you can navigate with the Volume up and down button and use the Power button to make a selection.

• Step 4. Select the option of “wipe data/factory reset.

• Step 5. This will display the following prompt. Confirm your choice by selecting the “Yes” option.

• Step 6. Wait for a while as your phone will be restarted with factory settings.

Part 6: How to get into a locked phone in Safe Mode?

If you are using a third-party application to lock your device, you can easily disable it by restarting your phone in safe mode. In this way, you can get rid of the respective app without causing any damage to the ZTE Blade A73 5G device. You can learn how to get into a locked Android phone by following these steps:

• Step 1. Long-press the Power button to activate the Power option on the screen.
• Step 2. If you don’t get the option to restart the phone in Safe Mode, then long tap the “Power off” option.
• Step 3. It will provide the following prompt regarding Safe Mode. Just tap on the “Ok” button to confirm your choice.

Part 7: How to get into a locked phone using Custom Recovery?

Since custom recovery provides a third-party recovery environment, it can learn how to get into a locked Android device. Additionally, you need to flash it via an SD card since you won’t access the phone storage on a locked device.

• Step 1. To start with, you need to download the password/pattern disable file from right here and copy it onto your SD card.
• Step 2. Mount the SD card on your device and restart it in recovery mode by providing the correct key combinations.
• Step 3. From the provided options, choose to install zip from the SD card.
• Step 4. Confirm your selection and let your phone be restarted with no lock screen.

Bonus Tip: General tips for unlocking phone successfully

By following these tips, you can increase the chances of successfully unlocking your phone while safeguarding your data and security.

1. Data Backup: Regularly back up your data that ensures you have a recent backup of all your important data, such as contacts, photos, videos, and documents. This will prevent data loss in case the unlocking process results in a factory reset.
2. Reputable Methods: Use reputable and official unlocking methods whenever possible, such as Dr.Fone - Screen Unlock.

Conclusion

By following these simple steps, you would learn how to get into a locked phone. If you are looking for a trouble-free way to unlock an Android device, then give Dr.Fone - Screen Unlock a try. It is a highly reliable solution to learn how to get into a locked Android phone and unlock your device in minutes with no complications.

How to Reset a ZTE Blade A73 5G Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a ZTE Blade A73 5G phone that is locked, or how to get into a locked ZTE Blade A73 5G phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a ZTE Blade A73 5G Phone that is locked?

Before you go to reset your locked ZTE Blade A73 5G phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked ZTE Blade A73 5G phone typically involves performing a factory reset. The process erases all data and settings on the ZTE Blade A73 5G device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

ZTE Blade A73 5G , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a ZTE Blade A73 5G Phone That is Locked With Google Find My Device?

Resetting a locked ZTE Blade A73 5G phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked ZTE Blade A73 5G phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked ZTE Blade A73 5G phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a ZTE Blade A73 5G phone that is locked without a password?

In order to reset your ZTE Blade A73 5G phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your ZTE Blade A73 5G phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a ZTE Blade A73 5G Phone That Is Locked Without a Password!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Work for forgotten passwords, second-hand ZTE Blade A73 5G devices, etc.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your ZTE Blade A73 5G phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “ZTE Blade A73 5G .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the ZTE Blade A73 5G device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your ZTE Blade A73 5G Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a ZTE Blade A73 5G phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your ZTE Blade A73 5G phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your ZTE Blade A73 5G Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the ZTE Blade A73 5G device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your ZTE Blade A73 5G phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked ZTE Blade A73 5G phone with Gmail ID and password

It is imperative to understand that unlocking your ZTE Blade A73 5G Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a ZTE Blade A73 5G phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the ZTE Blade A73 5G device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your ZTE Blade A73 5G. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your ZTE Blade A73 5G phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a ZTE Blade A73 5G phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

Forgot Pattern Lock? Here’s How You Can Unlock ZTE Blade A73 5G Pattern Lock Screen

Forgetting the pattern lock of a device and getting locked out of it is probably one of the most frustrating scenarios faced by Android users. Nevertheless, unlike popular operating systems, Android provides a seamless way to past the forgot pattern lock feature.

You can either try Google’s native solution or a third-party tool in case you have forgotten the pattern lock on your device and reset it. In no time, you will be able to access your device (or even someone else’s phone by following these techniques). To make things easier for you, we have provided three simple solutions to resolve forgotten patterns on Android devices.

Part 1: How to bypass forgot pattern lock using the ‘Forgot Pattern’ feature?

One of the easiest and fastest ways to fix the forgot pattern lock issue on a device is by using its inbuilt “Forgot Pattern” feature. If you are using an Android 4.4 or earlier version, then you can simply access this feature. Since users can hack an Android device just by knowing the Google credentials of the connected device, the solution was later discontinued (as it was considered a security vulnerability). Nevertheless, if your device hasn’t been updated and you are using an Android 4.4 or previous version, then you can bypass the forgot pattern lock by following these steps:

Step 1. Firstly, provide the wrong pattern to your device. It will let you know that you applied the incorrect pattern.

Step 2. On the same prompt, you can see an option of “Forgot pattern” on the bottom. Simply tap on it.

Step 3. This will open a new screen, which can be used to bypass the forgotten pattern of Android. Select the option for entering the Google Account details and proceed.

Step 4. To reset the forgot pattern lock, you need to provide the correct Google credentials of the account already linked to the ZTE Blade A73 5G device.

Step 5. After signing in to the interface, you will be asked to provide a new pattern lock for the ZTE Blade A73 5G device.

Step 6. Confirm your choice and set a new pattern lock on your device.

Part 2: How to get past forgot pattern lock using Dr.Fone - Screen Unlock (Android)?

One of the major drawbacks of the “Forgot pattern” feature is that it doesn’t work on new Android devices. Since most of the ZTE Blade A73 5G devices out there have been updated, the technique has been outdated. Therefore, you can simply take the assistance of Dr.Fone - Screen Unlock (Android) to bypass the forgot pattern lock on your device. Without causing any harm to your device or erasing its data, your device’s password or pattern would be removed.

It is a part of the Dr.Fone toolkit and is compatible with all the leading Android devices out there. It can be used to remove passwords, patterns, pins, and more. It has an easy-to-use interface and provides a simple click-through process to resolve the forgot pattern Android lock on your device. However, this tool merely retains all the data after unlocking Samsung and LG screens. Other Android locked screens can also be unlocked, and the only thing is that it will wipe all the data after unlocking.

Dr.Fone - Screen Unlock

Save You from Ending up with a Locked Phone After Too Many Pattern Attempts

• It can remove 4 screen lock types - pattern, PIN, password & fingerprints.
• Work for Samsung, LG, Huawei phones, Google Pixel, Xiaomi, Lenovo, etc.
• Unlock 20,000+ models of Android phones & tablets.
• Enable you to break your Android pattern lock without root.

4,008,669 people have downloaded it

Step 1. To start with, visit the official website of Dr.Fone - Screen Unlock (Android) and download it on your system. After installing it, launch the tool and select the option of “Screen Unlock” from the home screen.

Step 2. To use its forgot pattern lock feature, you need to connect your ZTE Blade A73 5G to your system using a USB cable. Once your device has been detected automatically, just click on the “Android”> “Unlock Android Screen” button.

Step 3. Select the correct phone brand. It is important to ensure phone brand correctness to prevent bricking.

Step 4. Then, enter “confirm” in the box to tell the tool that you agree to proceed.

Step 5. Now, in order to fix the forgot pattern Android issue, you need to put your device into the Download Mode. To do this, you need to ensure that your device is switched off. Once it is off, hold the Power, Home, and Volume Down buttons simultaneously. After a while, press the Volume Up button to put your device into Download Mode.

Step 6. After your device enters its Download Mode, it will automatically be detected by the interface. It will start downloading the needed recovery packages to resolve the issue. Sit back and relax, as it might take a while to download the recovery packages. Let the application process the essential operations, and don’t disconnect your ZTE Blade A73 5G until it is completed successfully.

Step 7. In the end, you will get a prompt like this on the screen, informing you that the password/pattern on the ZTE Blade A73 5G device has been removed.

That’s it! Now, you can disconnect the ZTE Blade A73 5G device safely and use it how you like.

Part 3: How to bypass forgot pattern lock using Android Device Manager?

To make it easier for its users to locate, lock, or erase their devices remotely, Google has developed a dedicated feature of the Android Device Manager. It is also commonly known as “Find My Device” as it is mostly used to locate a lost (or stolen) device. Though you can use this feature to ring your device, lock it, unlock it, or erase it remotely. You can access it from anywhere by providing your Google credentials and resolving the forgot pattern Android problem.

All of this can be done by following these steps:

Step 1. Launch a web browser of any device and go to the Android Device Manager website by clicking right here: https://www.google.com/android/find .

Step 2. You need to provide your Google credentials to sign in. Remember, this should be the same Google account that is linked to your device.

Step 3. After signing in, select the target Android device.

Step 4. You will get the location of the ZTE Blade A73 5G device with several other options (lock, erase, and ring).

Step 5. Click on the “Lock” button to reset its password.

Step 6. It will open a new pop-up window. From here, you can provide the new password for your device.

Step 7. After confirming your password, you can also provide an optional recovery message and phone number (if your device has been lost or stolen).

Step 8. Save your changes and sign out of your account from Android Device Manager.

This will automatically reset the old pattern on your device to the new password.

Part 4: How to bypass forgot Samsung pattern lock using Samsung Find My Mobile

Bypassing a forgotten Samsung pattern lock using the Samsung Find My Mobile service is a method specifically designed for Samsung devices. This method allows you to unlock your Samsung device without losing any data. It’s a convenient way to regain access to your device if you’ve forgotten the pattern lock.

However, it relies on having previously set up Samsung Find My Mobile and linked your device. Here is how to unlock your Samsung device with Samsung Find My Mobile:

Step 1: Access the Find My Mobile (SmartThings Find) website using either a computer or another mobile device. Sign in using the Samsung account details linked to the locked device.

Step 2: After successfully logging in, locate the locked Samsung device. Now, click on the “Unlock” feature. Upon choosing this option, a pop-up window will appear. It will prompt you to input your Samsung account password. Once you’ve entered your password, proceed to unlock the ZTE Blade A73 5G device by pressing “Next.”

Part 5: How to bypass forgot pattern lock using Safe Mode

If you have locked your device using a third-party app, there exists a simple solution. You can use the Safe Mode to remove the problematic app. Safe Mode is intended for troubleshooting and disabling third-party apps. Following are the steps you need to follow to use Safe Mode to unlock your Android device:

Step 1: Initiating Safe Mode requires a simultaneous three-second press of the “Volume Down” and “Power” keys. When the power menu becomes visible, proceed to long-press the “Power Off” icon.

Step 2: In a moment, you’ll see the option “Safe Mode” replacing the other “Power Off” menu options. Proceed to boot your device into Safe Mode and uninstall the troublesome application.

Part 6: How to bypass forgot pattern lock using Factory Reset

Bypassing a forgotten pattern lock on an Android device using a factory reset is a last resort. The reason is it will erase all data on your device, including apps, photos, and settings. However, it can be an effective way to regain access to your device when other methods have failed. Here’s how to do it:

Step 1: Turn off your Samsung device and connect it to your computer. Now press and hold “Volume Up” and “Power” keys for a while. Release the keys once the ZTE Blade A73 5G device enters Recovery Mode.

Step 2: In Recovery Mode, use the Volume keys to navigate to “Wipe data/factory reset” and select it with the “Power” key. Confirm the action on the next screen by selecting “Factory data reset.”

Wrap it up

If you have also forgotten the pattern lock on your device, then you can simply remove or reset it by following these solutions. In this way, you won’t even lose your important data files or cause any harm to your device. Without facing any unwanted setbacks, you would be able to bypass forgot pattern Android using Dr. Fone - Screen Unlock . It provides a fast, reliable, and secure solution to remove the lock screen security of an Android device in an effortless way.