Can I Bypass a Forgotten Phone Password Of Tecno Pova 5 Pro?

Screen locks on smartphones are crucial for keeping the data in your phone hidden. Password for phone becomes necessary when you have critical data on your phone. However, there is a downside to it.

Many people forget their screen lock, and that’s normal. That can happen if you accidentally type a new lock screen password incorrectly. Apart from that, there are many other explanations too. In short, you can get locked out of your device, which is a terrible experience. It can waste your time if you need something stored in your phone.

Here we have mentioned solutions to let you bypass your lock screen password. All the solutions mentioned here are safe and will work almost 100% of the time.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Part 1: How Can I Set or Change My password?

• Open the Settings application and tap the Security choice.
• Under Device Security, tap Screen Lock.

• Select a Screen lock option, i.e., Swipe, Example, PIN, Password, etc.

• When you pick your choice, follow the guidelines on the screen to set it. Enter your screen lock straightaway.
• Then redo your screen lock on the following screen, then, at that point, tap Confirm.

Part 2: 4 Simple Ways to Bypass Your Tecno Pova 5 Pro Phone Password

1. Google Find My Device

Our first approach to unlocking your device is to do a factory reset. That erases every one of the data on your phone too. You can perform this method if you have your Google account credentials and are ready. However, we want you to back up your data so you can sign once more after the reset and restore a ton of your data.

Since you’re locked out, you will have to utilize a technique to do the reset. The most straightforward way is to utilize Google’s Find My Device site. So, if the Find my Device option feature is enabled on your phone, you can tap the Erase device choice on this page to reset it.

2. Enter Recovery Mode to Hard Reset

If you can’t use the Find my device feature, you’ll have to factory reset physically. To do as such:

• Power your device off.
• Hold the Volume (-) and power keys all the while after the screen goes dark to raise Android’s bootloader menu. This button blend might be different relying on your device model.
• Press the Volume down button two times to feature the Recovery Mode choice. Then, at that point, press the power button to choose it.
• Hold the power button and press the Volume up button to enter this mode.
• Utilize the volume buttons to go to the Wipe data/Factory Reset choice. Continue with the steps to play out a factory reset.

3. Use ADB

This fix isn’t guaranteed to work; if you don’t watch out, it could damage your phone. Therefore, we suggest you back up everything on your Android before proceeding.

If your phone has USB debugging enabled, is connected to a PC, and is not encrypted, follow these steps:

• Connect your device to your PC through a USB connector.
• Open Command Prompt or Terminal window to your ADB installation registry.
• Type in adb shell rm/data/system/gesture.key and click the Enter key.
• Reboot your phone. When you do, the solid lock screen ought to be gone.
• That is not a permanent condition, so reset your PIN or password lock before you reboot your device once more. That’s how you reset password for phone.

4.Dr.Fone-Screen Unlock

If you want to unlock your phone without losing any data, we suggest Dr.Fone-Screen Unlock. Dr.Fone is a professional unlocking tool that can remove all types of screen locks in minutes. Dr.Fone is an all-in-one solution for all your iOS and Android needs. So, if you need a quick solution for your phone, download it now.

Step 1. Connect your Android telephone

Open the tool on your PC and select the “Screen Unlock” tool.

When the entire process is finished, you can access your Android device without entering any PIN and view all your data on the Tecno Pova 5 Pro device.

Step 2. Select Unlock Android Screen tool

We provide 2 options for you, and to unlock screen, you should select “Unlock Android Screen”.

Step 3. Select device model

There are still 2 buttons to choose, “100% Remove Screen Lock” is for most Android brands, but please back your device up before you pick it.

Check the brands list and make sure your unlock process keeps.

Step 4. Enter into Recovery Mode

Then follow the instructions on the program to get the Android phone into Recovery Mode. Here we take 3 different models of Samsung phones as example. (Note: Processes are different according to different brands).

Recovery Mode in Samsung Phone with Bixby

Recovery Mode in Samsung Phone without Bixby

Recovery Mode in Samsung Phone with Home Button

Step 5. Instructions to Erase Cache Partition

Steps in Recovery Mode are really important, find the correct options and your locked screen will be removed.

Now it’s a phone everyone can access without password or pattern.

Part 3: How to Back up My Tecno Pova 5 Pro Easily?

Dr.Fone-Phone Backup

As we all know, unlocking a lock screen password involves a hard reset, which can delete your user data. Therefore, you must back up your files before hard resetting.

There are several tools available to back up your files. You can use Google or your phone manufacturer’s cloud services to back up your file. However, none of them are secure enough. So, we suggest Dr.Fone-Phone Backup have a secure and reliable backup experience. Dr.Fone lets you choose the files you need and back them up. Moreover, you can restore those files to your phone once it gets unlocked.

The Bottom Line

Getting locked out of your phone can be frustrating, especially if you need an important file from it. However, there are solutions to get over this issue and unlock the password for phone. This article contains all you need to unlock your device and return it to be normal. Moreover, if you don’t want to lose your data, give Dr.Fone a try. It is currently the best unlocking and backup tool in the market.

How to Bypass Android Lock Screen Using Emergency Call On Tecno Pova 5 Pro?

The main reason why we keep our smartphone locked is to prevent children (or stalkers) checking out our private photos or messages. You don’t want anyone to access your pictures, emails, or other important data. What if you forget your pattern or PIN and cannot access your phone? Or someone changes lock screen pattern to leave you annoyed?

To avoid such types of conditions, we have tried and tested the following methods to bypass the Tecno lock screen pattern, PIN, password, and fingerprint.

Method 1. Use ‘Find My Mobile’ feature on Tecno Phone

All Tecno devices come with the “Find My Mobile” feature. To bypass the Tecno lock screen pattern, PIN, password, and fingerprint, you can just follow the below steps to get it done.

• Step 1. First, set up your Tecno account and log in.
• Step 2. Click the “Lock My Screen” button.
• Step 3. Enter a new PIN in the first field
• Step 4. Click the “Lock” button at the bottom
• Step 5. Within a few minutes, it will change the lock screen password to the PIN so that you can unlock your device.

Method 2. Use Android Device Manager to Bypass Tecno Password

To know how to unlock a Tecno phone lock password with Android device manager, make sure the Android Device Manager is enabled on your device.

• Step 1. Visit google.com/android/devicemanager on other smartphones or PC.
• Step 2. Log into your Google account that you used on your locked device.
• Step 3. Choose the Tecno Pova 5 Pro device you want to unlock in ADM interface
• Step 4. Click on the “Lock” option.
• Step 5. Enter a password. There is no need to enter any recovery message. Select “Lock” again.
• Step 6. You would see a confirmation below if it is successful, with “Ring, Lock and Erase” buttons.
• Step 7. Now you must get the password field on your phone where you can enter your new password, and your phone will be unlocked.
• Step 8. Go to lock screen settings on your device and disable the temporary password.

Method 3. Google Login (Supports Only Android 4.4 or Lower)

If your device is still running on Android 4.4 or lower, here’s how to bypass the Tecno lock screen fast.

• Step 1. Enter the wrong pattern for five times
• Step 2. Choose “Forgot Pattern”
• Step 3. Enter your Google account login or backup PIN
• Step 4. Now your phone would be unlocked.

Method 4. ‘Pattern Password Disable’ and Custom Recovery (SD Card needed)

To bypass the Tecno lock screen in this method, you ought to be an advanced user who knows what are “custom recovery” and “rooting”. You have to install any kind of customer recovery, and you should have an SD card on your phone. SD card is required to move a ZIP file to the phone, and it is the only way to transfer the file when the Tecno Pova 5 Pro device is locked.

• Step 1. Download a zip file named “Pattern Password Disable” on your computer and move it to the SD card of your Tecno device.
• Step 2. Insert the card on your device
• Step 3. Restart your device into recovery mode.
• Step 4. Flash the file on your card and restart the phone.
• Step 5. Now your phone would boot up without lock screen. Don’t worry if you had a gesture lock or password. All you need to do is to input a random gesture or password, and it will be unlocked.

Method 5. Delete the Password File Using ADB

It is yet another option that will work only when you have enabled USB Debugging previously on your device, and your PC is allowed to connect via ADB. If you meet such requirements, it is ideal to use this method to unlock the Tecno lock screen.

• Step 1. Connect your device to the PC using USB cable and open command prompt in the adb directory. Type the command “adb shell rm /data/system/gesture.key” and then press “Enter”.
• Step 2. Restart your phone, and a secure lock screen must be gone, and you can access your device. Be sure to set a new PIN, pattern, or password before rebooting again.

Method 6. Factory Reset to Bypass Tecno Lock Screen

A factory reset is the best option in almost any case if one of these solutions couldn’t work. According to your device type, the process may vary. In most devices, you have to turn off the Tecno Pova 5 Pro device completely to start the process. But this method will delete all the precious data on the Tecno Pova 5 Pro device after the factory reset.

• Step 1. Hold the power button and volume down at the same time. It will open the Bootloader menu.
• Step 2. Press the volume down button two times to choose “Recovery Mode” and select it by pressing the “Power” button.
• Step 3. Hold down the power button and tap “Volume Up” once, and you would enter “recovery” mode.
• Step 4. Choose “Wipe Data/Factory Reset” option by using volume buttons.
• Step 5. Select it by pressing the Power button.
• Step 6. Select “Reboot System Now” once the process is done.

Backup your Tecno phone regularly in case of any data loss in the future.

Method 7. Boot into Safe Mode

Chances may be that you are using a third-party lock screen app. Then lucky for you, this way works best to bypass the Tecno lock screen. Specifically, you can boot your Tecno device into Android Safe Mode .

• Step 1. Open up the Power menu from the lock screen and press and hold the “Power Off” option.
• Step 2. It will ask if you want to boot in safe mode. Tap “OK”
• Step 3. Once the process finishes, it will temporarily disable the lock screen activated by the third-party app.
• Step 4. Uninstall the third-party lock screen or just reset the data.
• Step 5. Reboot your device and get out of safe mode.
• Step 6. Now the irritating lock screen app is removed completely.

Method 8. Other Methods

• Step 1. Take your friend’s phone to call on your locked phone.
• Step 2. Accept the call and press the back button without disconnecting.
• Step 3. Now you can access the Tecno Pova 5 Pro device completely
• Step 4. Go to the security settings of the Tecno Pova 5 Pro device and remove the pattern or pin.
• Step 5. It will ask you the correct pin that you don’t know, guess, and try various combinations you can recall.

To avoid forgetting your password or PIN next time, be sure to write the pattern or numbers on a text file or paper to keep them safe. If you have to bypass the Tecno lock screen pattern, PIN, password, and fingerprint, you may consider using Dr.Fone - Screen Unlock (Android). It is a professional tool that can remove all the fingerprints, pattern, and password lock screens without losing any data on your phone.

Top 12 Prominent Tecno Pova 5 Pro Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Tecno Pova 5 Pro can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Tecno Pova 5 Pro fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Tecno Pova 5 Pro device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Tecno Pova 5 Pro device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Tecno Pova 5 Pro device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Tecno Pova 5 Pro device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Tecno Pova 5 Pro device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Tecno Pova 5 Pro fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Tecno Pova 5 Pro device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Tecno Pova 5 Pro device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Tecno Pova 5 Pro device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Tecno Pova 5 Pro fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Tecno Pova 5 Pro device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Tecno Pova 5 Pro device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Tecno Pova 5 Pro fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Tecno Pova 5 Pro .

Also read: