In 2024, Can I Bypass a Forgotten Phone Password Of Xiaomi Redmi Note 12T Pro?

Can I Bypass a Forgotten Phone Password Of Xiaomi Redmi Note 12T Pro?

Screen locks on smartphones are crucial for keeping the data in your phone hidden. Password for phone becomes necessary when you have critical data on your phone. However, there is a downside to it.

Many people forget their screen lock, and that’s normal. That can happen if you accidentally type a new lock screen password incorrectly. Apart from that, there are many other explanations too. In short, you can get locked out of your device, which is a terrible experience. It can waste your time if you need something stored in your phone.

Here we have mentioned solutions to let you bypass your lock screen password. All the solutions mentioned here are safe and will work almost 100% of the time.

Part 1: How Can I Set or Change My password?

Open the Settings application and tap the Security choice.
Under Device Security, tap Screen Lock.

Select a Screen lock option, i.e., Swipe, Example, PIN, Password, etc.

When you pick your choice, follow the guidelines on the screen to set it. Enter your screen lock straightaway.
Then redo your screen lock on the following screen, then, at that point, tap Confirm.

Part 2: 4 Simple Ways to Bypass Your Xiaomi Redmi Note 12T Pro Phone Password

1. Google Find My Device

Our first approach to unlocking your device is to do a factory reset. That erases every one of the data on your phone too. You can perform this method if you have your Google account credentials and are ready. However, we want you to back up your data so you can sign once more after the reset and restore a ton of your data.

Since you’re locked out, you will have to utilize a technique to do the reset. The most straightforward way is to utilize Google’s Find My Device site. So, if the Find my Device option feature is enabled on your phone, you can tap the Erase device choice on this page to reset it.

2. Enter Recovery Mode to Hard Reset

If you can’t use the Find my device feature, you’ll have to factory reset physically. To do as such:

Power your device off.
Hold the Volume (-) and power keys all the while after the screen goes dark to raise Android’s bootloader menu. This button blend might be different relying on your device model.
Press the Volume down button two times to feature the Recovery Mode choice. Then, at that point, press the power button to choose it.
Hold the power button and press the Volume up button to enter this mode.
Utilize the volume buttons to go to the Wipe data/Factory Reset choice. Continue with the steps to play out a factory reset.

3. Use ADB

This fix isn’t guaranteed to work; if you don’t watch out, it could damage your phone. Therefore, we suggest you back up everything on your Android before proceeding.

If your phone has USB debugging enabled, is connected to a PC, and is not encrypted, follow these steps:

Connect your device to your PC through a USB connector.
Open Command Prompt or Terminal window to your ADB installation registry.
Type in adb shell rm/data/system/gesture.key and click the Enter key.
Reboot your phone. When you do, the solid lock screen ought to be gone.
That is not a permanent condition, so reset your PIN or password lock before you reboot your device once more. That’s how you reset password for phone.

4.Dr.Fone-Screen Unlock

If you want to unlock your phone without losing any data, we suggest Dr.Fone-Screen Unlock. Dr.Fone is a professional unlocking tool that can remove all types of screen locks in minutes. Dr.Fone is an all-in-one solution for all your iOS and Android needs. So, if you need a quick solution for your phone, download it now.

Step 1. Connect your Android telephone

Open the tool on your PC and select the “Screen Unlock” tool.

When the entire process is finished, you can access your Android device without entering any PIN and view all your data on the Xiaomi Redmi Note 12T Pro device.

Step 2. Select Unlock Android Screen tool

We provide 2 options for you, and to unlock screen, you should select “Unlock Android Screen”.

Step 3. Select device model

There are still 2 buttons to choose, “100% Remove Screen Lock” is for most Android brands, but please back your device up before you pick it.

Check the brands list and make sure your unlock process keeps.

Step 4. Enter into Recovery Mode

Then follow the instructions on the program to get the Android phone into Recovery Mode. Here we take 3 different models of Samsung phones as example. (Note: Processes are different according to different brands).

Recovery Mode in Samsung Phone with Bixby

Recovery Mode in Samsung Phone without Bixby

Recovery Mode in Samsung Phone with Home Button

Step 5. Instructions to Erase Cache Partition

Steps in Recovery Mode are really important, find the correct options and your locked screen will be removed.

Now it’s a phone everyone can access without password or pattern.

Part 3: How to Back up My Xiaomi Redmi Note 12T Pro Easily?

Dr.Fone-Phone Backup

As we all know, unlocking a lock screen password involves a hard reset, which can delete your user data. Therefore, you must back up your files before hard resetting.

There are several tools available to back up your files. You can use Google or your phone manufacturer’s cloud services to back up your file. However, none of them are secure enough. So, we suggest Dr.Fone-Phone Backup have a secure and reliable backup experience. Dr.Fone lets you choose the files you need and back them up. Moreover, you can restore those files to your phone once it gets unlocked.

The Bottom Line

Getting locked out of your phone can be frustrating, especially if you need an important file from it. However, there are solutions to get over this issue and unlock the password for phone. This article contains all you need to unlock your device and return it to be normal. Moreover, if you don’t want to lose your data, give Dr.Fone a try. It is currently the best unlocking and backup tool in the market.

How to Bypass Android Lock Screen Using Emergency Call On Xiaomi Redmi Note 12T Pro?

The main reason why we keep our smartphone locked is to prevent children (or stalkers) checking out our private photos or messages. You don’t want anyone to access your pictures, emails, or other important data. What if you forget your pattern or PIN and cannot access your phone? Or someone changes lock screen pattern to leave you annoyed?

To avoid such types of conditions, we have tried and tested the following methods to bypass the Xiaomi lock screen pattern, PIN, password, and fingerprint.

Method 1. Use ‘Find My Mobile’ feature on Xiaomi Phone

All Xiaomi devices come with the “Find My Mobile” feature. To bypass the Xiaomi lock screen pattern, PIN, password, and fingerprint, you can just follow the below steps to get it done.

Step 1. First, set up your Xiaomi account and log in.
Step 2. Click the “Lock My Screen” button.
Step 3. Enter a new PIN in the first field
Step 4. Click the “Lock” button at the bottom
Step 5. Within a few minutes, it will change the lock screen password to the PIN so that you can unlock your device.

Method 2. Use Android Device Manager to Bypass Xiaomi Password

To know how to unlock a Xiaomi phone lock password with Android device manager, make sure the Android Device Manager is enabled on your device.

Step 1. Visit google.com/android/devicemanager on other smartphones or PC.
Step 2. Log into your Google account that you used on your locked device.
Step 3. Choose the Xiaomi Redmi Note 12T Pro device you want to unlock in ADM interface
Step 4. Click on the “Lock” option.
Step 5. Enter a password. There is no need to enter any recovery message. Select “Lock” again.
Step 6. You would see a confirmation below if it is successful, with “Ring, Lock and Erase” buttons.
Step 7. Now you must get the password field on your phone where you can enter your new password, and your phone will be unlocked.
Step 8. Go to lock screen settings on your device and disable the temporary password.

If your device is still running on Android 4.4 or lower, here’s how to bypass the Xiaomi lock screen fast.

Step 1. Enter the wrong pattern for five times
Step 2. Choose “Forgot Pattern”
Step 3. Enter your Google account login or backup PIN
Step 4. Now your phone would be unlocked.

Method 4. ‘Pattern Password Disable’ and Custom Recovery (SD Card needed)

To bypass the Xiaomi lock screen in this method, you ought to be an advanced user who knows what are “custom recovery” and “rooting”. You have to install any kind of customer recovery, and you should have an SD card on your phone. SD card is required to move a ZIP file to the phone, and it is the only way to transfer the file when the Xiaomi Redmi Note 12T Pro device is locked.

Step 1. Download a zip file named “Pattern Password Disable” on your computer and move it to the SD card of your Xiaomi device.
Step 2. Insert the card on your device
Step 3. Restart your device into recovery mode.
Step 4. Flash the file on your card and restart the phone.
Step 5. Now your phone would boot up without lock screen. Don’t worry if you had a gesture lock or password. All you need to do is to input a random gesture or password, and it will be unlocked.

Method 5. Delete the Password File Using ADB

It is yet another option that will work only when you have enabled USB Debugging previously on your device, and your PC is allowed to connect via ADB. If you meet such requirements, it is ideal to use this method to unlock the Xiaomi lock screen.

Step 1. Connect your device to the PC using USB cable and open command prompt in the adb directory. Type the command “adb shell rm /data/system/gesture.key” and then press “Enter”.
Step 2. Restart your phone, and a secure lock screen must be gone, and you can access your device. Be sure to set a new PIN, pattern, or password before rebooting again.

Method 6. Factory Reset to Bypass Xiaomi Lock Screen

A factory reset is the best option in almost any case if one of these solutions couldn’t work. According to your device type, the process may vary. In most devices, you have to turn off the Xiaomi Redmi Note 12T Pro device completely to start the process. But this method will delete all the precious data on the Xiaomi Redmi Note 12T Pro device after the factory reset.

Step 1. Hold the power button and volume down at the same time. It will open the Bootloader menu.
Step 2. Press the volume down button two times to choose “Recovery Mode” and select it by pressing the “Power” button.
Step 3. Hold down the power button and tap “Volume Up” once, and you would enter “recovery” mode.
Step 4. Choose “Wipe Data/Factory Reset” option by using volume buttons.
Step 5. Select it by pressing the Power button.
Step 6. Select “Reboot System Now” once the process is done.

Backup your Xiaomi phone regularly in case of any data loss in the future.

Method 7. Boot into Safe Mode

Chances may be that you are using a third-party lock screen app. Then lucky for you, this way works best to bypass the Xiaomi lock screen. Specifically, you can boot your Xiaomi device into Android Safe Mode .

Step 1. Open up the Power menu from the lock screen and press and hold the “Power Off” option.
Step 2. It will ask if you want to boot in safe mode. Tap “OK”
Step 3. Once the process finishes, it will temporarily disable the lock screen activated by the third-party app.
Step 4. Uninstall the third-party lock screen or just reset the data.
Step 5. Reboot your device and get out of safe mode.
Step 6. Now the irritating lock screen app is removed completely.

Method 8. Other Methods

Step 1. Take your friend’s phone to call on your locked phone.
Step 2. Accept the call and press the back button without disconnecting.
Step 3. Now you can access the Xiaomi Redmi Note 12T Pro device completely
Step 4. Go to the security settings of the Xiaomi Redmi Note 12T Pro device and remove the pattern or pin.
Step 5. It will ask you the correct pin that you don’t know, guess, and try various combinations you can recall.

To avoid forgetting your password or PIN next time, be sure to write the pattern or numbers on a text file or paper to keep them safe. If you have to bypass the Xiaomi lock screen pattern, PIN, password, and fingerprint, you may consider using Dr.Fone - Screen Unlock (Android). It is a professional tool that can remove all the fingerprints, pattern, and password lock screens without losing any data on your phone.

How to Unlock Xiaomi Redmi Note 12T Pro Phone Pattern Lock without Factory Reset

Have you been locked out of your Android device and can’t seem to recall its pattern? Do you wish to learn how to unlock an Android phone pattern lock without a factory reset to access someone else’s device? If your answer is “yes”, then you have come to the right place. Lots of readers these days ask us about a foolproof way to learn how to unlock an Android phone pattern lock without a factory reset. To help you, we have decided to come up with an in-depth guide on the same. Read on and learn in 4 different ways.

Part 1: Unlock the Android Phone Pattern with Lock Screen Removal Tool

If you are locked out of the phone because forgot pattern lock, and fail to enter the phone after many times try with the word “phone has been locked”. No need to worry, there are many solutions to fix the issue. And Dr.Fone –Screen Unlock (Android) can be your first saver in the dilemma. It is a highly efficient pattern lock removal tool for over 2000+ mainstream android phones, like Samsung, Oneplus, Huawei, Xiaomi, Pixel, etc.

Except for pattern locks unlocking, it works for the PIN, fingerprints, Face ID, and Google FRP bypassing as well. It’s helpful even if you don’t know the OS version of your devices. So, now follow the below steps to unlock the pattern and regain access to your locked phone in minutes.

Dr.Fone - Screen Unlock (Android)

Get into Locked Phones within Minutes

Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
Easily remove the lock screen; No need to root your device.
Everybody can handle it without any technical background.
Provide specific removal solutions to promise good success rate

4,008,669 people have downloaded it

Step 1. Download Dr.Fone –Screen Unlock on your PC or Mac.

Step 2. Connect your Android phone to the computer using a USB cable. Next, click the “Unlock Android Screen“ from the interface.

Step 3. Choose the model version according to your android phone. For people who don’t know the operating system version, tick the circle “I can’t find my device model from the list above”.

Step 4. Enter and download the recovery package as the instructions show on the PC or Mac.

Step 5. It will be finished when the recovery package downloading is completed. Then, click “Remove Now“.

Once the whole progress is over, you can access your Android device without entering any password and view all your data on the Xiaomi Redmi Note 12T Pro device with no limits.

safe & secure

Part 2: How to unlock the Android phone pattern lock without resetting using a Google account?

If you have an older Android device, then you can simply move past its lock by taking the assistance of your Google account. All you need is access to the same Google account that is linked to your device. Though, this technique will only work on devices running on Android 4.4 and earlier versions. To learn how to remove pattern lock on Android without a factory reset, follow these steps:

Step 1. Simply provide any pattern on the Xiaomi Redmi Note 12T Pro device. Since the pattern would be wrong, you will get the following prompt.

Step 2. Tap on the “Forgot Pattern” option located at the bottom of the screen.

Step 3. This will provide different ways to access your phone. Select the Google Account details and tap on the “Next” option.

Step 4. Sign in using the credentials of the Google account that is linked to your device.

Step 5. Great! Now you can simply provide (and confirm) the new pattern for your device.

After following these instructions, you would be able to learn how to unlock an Android phone pattern lock without factory reset or causing any harm to your device.

Part 3: How to unlock Android phone password without factory reset - Android Device Manager

The Android Device Manager, which is now known as “Find My Device” is one of the best ways to locate your Android device remotely. Besides that, you can also use the interface to ring your device or change its lock from anywhere. All you need to do is access its interface from any other device and log-in with your Google credentials. You can follow these steps to learn how to unlock the Android pattern lock without factory reset.

Step 1. Log in to Android Device Manager (Find My Device) using your Google credentials.

Android Device Manager website: https://www.google.com/android/find .

Step 2. From the interface, you can select the Android device that is linked to your Google account.

Step 3. You will get options to ring it, lock it, or erase it. Select the “Lock” option to proceed.

Step 4. This will launch a new pop-up window. From here, you can provide a new lock screen password, confirm it, and also set an optional recovery message or phone number (in case your device has been lost).

Step 5. Confirm your choice and save it to remotely change the lock screen password on your device.

In the end, you would be able to learn how to unlock an Android phone pattern lock without a factory reset after following these above-mentioned steps.

Part 4: How to unlock Android phone pattern lock without factory reset using ADB?

By using Android Debug Bridge (ADB), you can also learn how to unlock the Android pattern lock without a factory reset. Though, this is a more time-consuming and complicated process than other alternatives like Dr.Fone. Nevertheless, you can learn how to remove pattern lock on Android without factory reset using ADB with these instructions:

Step 1. To start with, you need to download ADB on your system. This can be done by visiting the Android Developer’s website https://developer.android.com/studio/command-line/adb.html .

Step 2. Afterward, launch the installer and download all the essential packages on your system.

Step 3. Now, connect your phone to the system. Make sure that its USB debugging feature is on.

Step 4. To do this, go to Settings > About Phone and tap the “Build Number” option seven consecutive times. This will enable the Developer Options on your device.

Step 5. Go to Settings > Developer Options and turn on the feature of USB debugging.

Step 6. After connecting your device to the system, launch the command prompt in the installation directory on your respective ADB.

Step 7. Type the command “ADB shell rm /data/system/gesture.key” and press enter.

Step 8. Simply restart your device and access it the usual way, without any lock screen pattern or pin.

Conclusion

Now when you know how to unlock the Android phone pattern lock without a factory reset, you can easily access your device in a trouble-free way. Out of all the provided options, Dr.Fone - Screen Unlock (Android) is the best alternative. It provides a fast, secure, and reliable way to unlock your device without causing any harm or removing its content. Go ahead and give it a try and share these solutions with your friends and family as well.

Unlock Android