Everything You Need to Know about Lock Screen Settings on your Tecno Spark 10 Pro

Everybody of you is well familiar with Android lock screen and it can be undoubtedly said that lock screen does a great job for an Android user. It really works as the main gate of your Android device. It also works as a safeguard of your device from unauthorized access if you enable some sort of protection. By the way, activating the lock screen is optional as you can customize or deactivate it from android lock screen settings.

Here’s a charm that’s you can unlock your lock screen by many ways and you’ve to set the ways from android lock screen settings. Now you’ll come to know how to set different types of screen lock, customize Android lock screen, and even unlock your android phone without resetting it as all the ways of unlocking is related to the Tecno Spark 10 Pro device when it’s switched on.

Different Ways of Unlocking Your Tecno Spark 10 Pro

First look at the procedures on how you can enable the lock screen functionality from android lock screen settings. To reach the lock screen settings android, you’ve to follow the path:

Options – Security – Screen Lock – Choose Screen Lock.

Now see how to unlock your lock screen in different ways.

1.Slide

This is the most common method of unlocking an android lock screen. On all most all the android device, you’ll notice a lock mostly on the right side (sometimes on top) of a round charm. You just have to direct towards the lock and then the lock screen will be unlocked in no time. This method doesn’t provide any security (it just protects your device from sudden access by tapping on screen or any of the button) to your device as no password or PIN is required to set the “Slide” unlock.

Keep your any finger on the middle of the round charm and by keeping your finger pressed, reach on the lock icon. The lock screen will be unlocked just after reaching your finger to the lock icon.

2.Face Unlock

This method of unlocking your lock screen needs your Android device to snap a photo of your with its camera. After you set the snapped photo as the unlocking recognition, you could unlock your device through showing your face on the screen.

Capture a picture of your face with your Android device’s camera and then set it for logging in into your device. From the lock screen, by just by holding your face, you can log in. It’s very interesting, but you should never rely on this method for strong security as this method of unlocking is prone to break easily as an intruder can unlock your device by putting a photo of you in front of your device. Moreover, this method sometimes doesn’t work properly. So it’s better to go for some other highly secured options for locking your screen.

3.Pattern

This is a way of setting pattern for lock screen from a grid of nine dots. You can select the pattern like some letter like Z, L or C etc, but nothing guarantees high security as the set pattern can be easily guessed or be seen while you are unlocking your device. Another problem is that by unlocking with the same pattern, your finger leaves some marks for the pattern’s path. By following the path, a stranger can unlock your device. So for little security, you can use pattern unlock method on your Android device.

Go to the lock screen setting for Pattern and then set the pattern by sliding your finger from one dot to another, then another and like that way. Remember which pattern you’ve set in order to unlock your device in the next time.

4.PIN

You might be troubled by thinking about the difference between PIN and Password. A little distinction is there for a PIN and that is it consists of numbers only whereas for password, you can associate some alphabetical letters or signs along with numbers.

Go to the lock screen setting for PIN and then set a PIN that consists of minimum 4 digits. It’s your choice to use 4 or more digit PIN. After setting the PIN, you can access your Android device by putting the PIN in a box from the lock screen. PIN protected lock screen is highly protected if the PIN is set strongly.

5.Password

In addition to PIN protection, you can consider it as password by adding some letters, special characters with the previously selected PIN codes. It’s also very much highly protected method of locking screen though you might be bored with tapping for the password again and again. But never ignore the value of your device’s files, so a password can be a well-sought lock screen protection for many users.

6.Fingerprint

In some of the modern Android device, you’ll find the feature of fingerprint unlocking. You can find the option through the screen or any dedicated button. By setting your fingerprint, you can unlock your device by tapping your finger on the Tecno Spark 10 Pro device’s screen or the dedicated button.

7.Voice

This is also a fun way of unlocking Android lock screen as you can unlock by saying the same voice that you’ve saved as the unlocking recognition.

Go to the setting from “Voice Unlock” button and record your voice such as “Open My Tecno Spark 10 Pro” or as per your choice with clear sound. Repeat the voice a few more times as to match well. Then set and unlock your device from the lock screen by using the same voice command.

Customize Android Lock Screen

Lock Screen Widgets

Widgets can be used from Android lock screen without unlocking the Tecno Spark 10 Pro device first. Also, because of this, any one who can access your phone can see your information from widgets. But since Lollipop update, widgets has been changed to Notifications on Android. Here, let’s see how to set customize widgets on Android running OS before lollipop. You can also find some useful alternatives to lock screen widgets here.

For devices running Android 4.2 or 4.3, lock screen widgets are enabled by default. So you can use them directly. For users of KitKat, you can go to Settings, select Security, and find Enable Widgets option. To add a new widget to the lock screen, swipe the screen from left to right until there is a plus on the screen. Tap the plus and select the widget you would like to add. You can also drag the widgets to repalce it.

Smart Lock on Android

Smart Lock is a new feature introduced in Lollipop. It helps you keep your device unlocked when it’ safe with you, by recognizing locations, bluetooth system, or smartwatch etc. To know more about Smart lock settings , just follow the information here.

Customize Lock Screen Wallpaper

Except all the different types lock method to protect your phone, there are also many wallpapers to make your lock screen lool beautiful or cool. Click here to check out how to change lock screen wallpapers and download more beatiful wallpapers from different sites.

Bypass your Samsung Phone’s Lock Screen using Dr.Fone - Screen Unlock (Android)

This is an easy way to unlock your Samsung device if you forgot your Samsung’s lock screen pattern, PIN or password.It’s named Dr.Fone - Screen Unlock (Android) ,which is the best tool to solve your problems with simple steps.

Note: If your are using Samsung or Lg, then this tool can perfectly remove the locked screen while keeping all the data. As for thoes users who are using Andriod phone, this tool still can help you unlock the screen while you will lose all your data after unlocking.

Dr.Fone - Android Lock Screen Removal

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove 4 screen lock types - pattern, PIN, password & fingerprints.
• Only remove the lock screen, no data loss at all.
• No tech knowledge asked, everybody can handle it.
• Work for Samsung Galaxy S/Note/Tab series, and LG G2/G3/G4, etc .

3,587,277 people have downloaded it

Follow the steps on how to bypass your Samsung Phone’s lock screen by Dr.Fone - Screen Unlock (Android)

Step 1. Run Dr.Fone and choose “Screen Unlock”.

Step 2. Connect your Samsung with USB on computer,then you will see the windows as follow,and select phone model in the list.

Step 3. Enter the download mode on your Samsung device. Follow the guide of the windows.

• 1.Power off the phone.
• 2.Press and hold volume down + home button + power button at the same time.
• 3.Press the volume up to enter download mode.

Step 4. Download the recovery package after your device model matched successfully.

Step 5. When the recovery package is downloaded completed,you can start the process of unlock,the whole process won’t lose any data on your device.You can access your device without entering any password or PIN after the process is finished.

Video on How To Remove Android Lock Screen

How to Reset a Tecno Spark 10 Pro Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Tecno Spark 10 Pro phone that is locked, or how to get into a locked Tecno Spark 10 Pro phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Tecno Spark 10 Pro Phone that is locked?

Before you go to reset your locked Tecno Spark 10 Pro phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Tecno Spark 10 Pro phone typically involves performing a factory reset. The process erases all data and settings on the Tecno Spark 10 Pro device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Tecno Spark 10 Pro , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Tecno Spark 10 Pro Phone That is Locked With Google Find My Device?

Resetting a locked Tecno Spark 10 Pro phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Tecno Spark 10 Pro phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Tecno Spark 10 Pro phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Tecno Spark 10 Pro phone that is locked without a password?

In order to reset your Tecno Spark 10 Pro phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Tecno Spark 10 Pro phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Tecno Spark 10 Pro Phone That Is Locked Without a Password!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Work for forgotten passwords, second-hand Tecno Spark 10 Pro devices, etc.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Tecno Spark 10 Pro phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Tecno Spark 10 Pro .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Tecno Spark 10 Pro device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Tecno Spark 10 Pro Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Tecno Spark 10 Pro phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Tecno Spark 10 Pro phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Tecno Spark 10 Pro Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Tecno Spark 10 Pro device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Tecno Spark 10 Pro phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Tecno Spark 10 Pro phone with Gmail ID and password

It is imperative to understand that unlocking your Tecno Spark 10 Pro Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Tecno Spark 10 Pro phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Tecno Spark 10 Pro device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Tecno Spark 10 Pro. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Tecno Spark 10 Pro phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Tecno Spark 10 Pro phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

Universal Unlock Pattern for Tecno Spark 10 Pro

Why do you use a mobile password or pattern to lock your phone? Of course, you want to keep your personal information private from prying eyes. Have you ever been in a position where you recently changed your pattern lock or password code but then forgot it? We’ll talk about how to unlock your Android phone’s universal pattern lock.

We’ve recently received many feedback and questions from users who want to use a pattern unlock on their device. Whether you’ve forgotten your Android device’s password or want to gain access to someone else’s phone, there are a number of ways to figure out how to unlock a pattern on an Android phone. This comprWe’llhensive guide wi show you how to unlock patterns in six ways.

Part 1: Common universal unlock pattern for Tecno Spark 10 Pro

Today, many mobile phone users present a simple lock pattern that isn’t particularly strong or difficult to detect. That is something that many of us are guilty of. Lock patterns were intended to take the place of traditional passwords, however, we frequently forgo security in favor of easier lock patterns. Let’s look at some of the most frequent pattern locks in use today.

1. Patterns from the Upper Left Corner: It’s estimated that 44% of people begin their patterns from the upper left corner.
2. Other Corners: According to research, around 77 percent of users begin their patterns in one of the remaining three corners.
3. Nodes: It was discovered that many users only utilized five nodes. While a larger number of individuals used 4 nodes.
4. Letter Patterns: According to a study, around 10% of lock patterns are in the form of an alphabet. Some users just use the initial of their name.

Part 2: [Easiest] Universal way to Unlock Pattern for Tecno Spark 10 Pro

If you want the easiest method to unlock an Android phone, then Dr.Fone - Screen Unlock (Android) is an amazing choice. It is a tool that allows you to unlock your phone without much hassle. You can use it for universal pattern lock for MI, or other phones.

If you need to unlock a pin, pattern, password, fingerprint, or any other type of lock on an Android smartphone, Dr.Fone - Screen Unlock is the tool to use. It is a highly useful and sophisticated tool that allows you to bypass your device’s lock screen without harming it or erasing its contents (if your phone is not a Samsung or LG, the data will be erased after unlocking the screen).

Dr.Fone - Screen Unlock (Android)

Remove Android lock screen in 5 minutes

• On Android, disable all patterns, PINs, passwords, and fingerprint locks.
• Bypass Android FRP lock without a PIN or Google account.
• During the unlocking process, no data is lost or hacked.
• On-screen instructions are simple to follow.
• Mainstream Android devices are supported.

3,291,332 people have downloaded it

Know how do you use Dr.Fone - Screen Unlock (Android) to unlock a pattern lock

Step 1: Download and run Dr.Fone – Screen Unlock to unlock your phone’s pattern. Select the “Screen Unlock” option from the home screen.

Step 2: Make sure your device is connected to the system. Select “Android” to continue, then click the “Unlock Android Screen” button once it has been recognized.

Step 3: On the next screen, choose the correct model and other information of your device.

Step 4: Now, turn your phone into download mode. Turn it off and simultaneously hit the Home, Power, and Volume Down keys. Then, on your device, hit the Volume Up key to enter Download Mode.

Step 5: Relax while downloading the recovery software and completing the necessary steps to unlock your handset.

Step 6: Click on “Remove Now” button and the unlocking process will begin.

Step 7: When the process is finished, you will be alerted. Simply unplug your device and use it without a password or pattern lock.

safe & secure

Part 3: Other ways to Unlock Pattern for Android

There are other ways to unlock the universal unlock patterns for Android. We have mentioned some of them below.

Way 1: Remove Gesture File Using ADB

The first method is ADB, which stands for Android Debug Bridge. With the help of this, you can unlock your Android’s universal unlock pattern without the need of a factory reset. However, the process may seem a bit time-consuming to you. Here is how you can do it.

Step 1: Open your PC and head to Android Developer’s site . Download ADB now.

Step 2: Launch it now and install the packages on your PC.

Step 3: Connect your Android to PC now. Before that, make sure to enable USB Debugging. If you don’t know-how, simply head to the “Settings”> “About Phone” and tap on “Build Number” 7 times. This will enable the Developer’s Options.

Step 4: Now go to the Developer Options menu and turn on the USB Debugging.

Step 5: After connecting Android to PC, you need to open the command prompt in the installation directory.

Step 6: Run the following command and press Enter key: adb shell rm /data/system/gesture.key

In regular mode, restart the phone. The pattern will be requested. However, any pattern will unlock the screen.

Way 2: Boot into Safe Mode to Bypass Third-Party App Screen Lock

It’s one of the most straightforward ways to get past the lock screen. One thing to note is that this method is effective only if the lock screen is a third-party app rather than the standard one.

Step 1: Firstly, long-press the Power button to get the power menu.

Step 2: Now, long tap the “Power Off” button and click “OK” when shown the pop-up.

Step 3: This will restart your device in safe mode.

Step 4: This will turn off the third-party lock screen for the time being. Clear the lock screen app’s data, uninstall it, and then reboot to exit safe mode.

Way 3: Unlock Pattern Lock via Factory Reset

This should only be a last option because it will completely delete your device’s data and saved settings. Your device will be reset to factory settings, meaning your device’s settings will get back to the same as when you first bought it. If you want to learn how to unlock a pattern by doing a factory reset, follow these steps:

Step 1: Long press the Home, Power and Volume Up keys to Recovery Mode.

Please note that the Recovery mode method may vary from device to device. So please ensure to check the key combination before you do it.

Step 2: Now go to the “wipe data/factory reset” option using the volume keys. To confirm it, press the Power key.

Click here

Step 3: Now, again, confirm the process using the same keys.

Step 4: The phone will perform the factory reset. In a short while, restart your device and there will be no lock screen.

Click here

Way 4: Unlock Pattern Lock with Android Device Manager

Android Device Manager unlocking is the second-best service for bypassing the Android lock screen on locked Android devices and tablets. Working on this service is quite straightforward, and it only works if the user has a Google account. This service is accessible and usable from any device or computer.

There are a few things to keep in mind as you use this service to get around the lock screen. If the Android device is compatible, the Android Device Manager will connect it after a few tries. After it has been connected to the Tecno Spark 10 Pro device, we can begin by pressing the “Lock” button.

After pressing the “Lock” button, a popup will appear, asking for a new password to replace the forgotten pin, pattern, or password.

Type the new password once, then confirm it by typing it again. This will change the password in a few minutes and the new password can be used to unlock the Tecno Spark 10 Pro device.

Way 5: Use Forgot Pattern Feature [Android 4.4 Version and Earlier]

If you use an older Android version, you can get rid of the universal unlock pattern by forgot pattern feature. On earlier Android devices, this feature is enabled by default. After a few failed attempts, the warning “Try again in 30 seconds” appears and here is where the steps begin. Let us get to know in detail.

Step 1: Simply enter wrong pattern too many times until try again in 30 seconds warning comes.

Step 2: Select the “Forgot Pattern” option below the message.

Enter the primary Gmail account and password you used to set up your Android smartphone after selecting the same. Then you must provide your Google account information. A new unlock pattern will be emailed to you by Google.

Click here

Conclusion

Universal unlock patterns allow you to unlock your phone easily when you think you have forgotten. Well, numerous patterns allow you to unlock the Android. You can choose either of the above to unlock your android phone. If you have failed to use any pattern, you can easily unlock your Android by Dr.Fone - Screen Unlock (Android) . It will let you access yours by unlocking it hassle-free.

Also read: