How Can We Unlock Our Tecno Spark 10C Phone Screen?

A phone lock acts as your Android phone’s shield against unauthorized users. Some users have new security features, such as fingerprint impression unlocks for an Android lock screen.

However, certain people like to create a PIN and password on their Google account as their Android screen lock. It tends to be distressing and tedious when you fail to remember the code of your Android phone. Surprisingly, being fully locked out of your device is awful. Also, it can be hard at first to unlock your Android.

Anyway, no one can escape such a situation. Yet, sit back and relax! We know several techniques on the best way to unlock your phone and set a screen lock. You can attempt software like Wondershare Dr.Fone - Screen Unlock for Android to assist you with unlocking your phone in a couple of steps. Besides this, there are various other ways.

Part 1: What Is Your Tecno Spark 10C Phone Lock System?

There are three types of standard lock types available for Android. You can set a PIN/password, fingerprint, or a pattern as your phone lock. All have their pros and cons. However, everyone should select the ideal one based on their liking and ease of use.

Once you decide on the phone lock type, you can enable or disable them from the Security tab in your Android phone’s settings. After you set a screen lock, your Android will require it every time you try to open your device.

Here you will see how to set up a screen lock on your Android device:

Part 2: Quickly Unlock Your Screen By Dr.Fone

Dr.Fone - Screen Unlock

For a quick, easy, and hassle-free unlocking experience, we suggest you download Dr.Fone - Screen Unlock. Dr.Fone not only unlocks your phone but keeps your data secured during the process. It has a simple interface, and even an amateur can use it to unlock their device.

So, look no further if you want to remove your Android screen lock in just a few clicks. Install Dr.Fone and enjoy using your device again.

Dr.Fone - Screen Unlock (Android)

The Best Tool to unlock Android Phone Screen!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise success rate.

4,008,672 people have downloaded it

Step 1. Open Dr.Fone on your PC and select the “Screen Unlock” tool.

Step 2. Select Unlock Android Screen

This is the page to start your unlock process with two options here, please select” Unlock Android Screen” to unlock your device screen.

Step 3. Select device model

For most Brands, it should be “100% Remove Screen Lock”. These two solutions unlock screens for almost all Android devices, for example, Samsung, Huawei, OPPO, Vivo, Lenovo, LG, etc.

In the supported device brands list, please find the right one for you.

Step 4. Enter into Recovery Mode

Before unlocking your device screen, the instructions below are here to help you to get into Recovery Mode. We take 3 Samsung phones as an example.

Get into Recovery Mode on Samsung phone with Bixby:

Get into Recovery Mode on Samsung phone without Bixby:

Get into Recovery Mode in Samsung phone with Home Button:

Step 5. Instructions to Wipe Cache Partition

During the steps in Recovery Mode, please don’t pick the wrong choices!

You’re now able to access your Android device again when the whole process is over. And you no longer need a password or pattern!

Part 3: Solutions to Unlock Android Screen

1. Google Find My Device

Step 1: Open the “Find my Device” webpage from a browser on your PC.

Click here

Step 2: Click “Erase my device,” which you will see on the left half of your screen. After affirming the Delete capability, your phone will boot into recovery and begin playing out a production line reset. It is difficult to stop or drop on your android gadget when you endorse this activity. Regardless of whether you shut down your Android phone - the reboot will continue on startup.

2. Recovery Mode

Depending on your phone, the steps for this process might vary a little. Most phones will allow you to reset by getting to the recovery mode. Follow the steps below to remove the Android screen lock:

Step 1: Turn on the Tecno Spark 10C device and enter the boot menu. If you want to know how to do so, you can do a speed search on the internet.

Step 2: Access the safe mode, use the volume keys to navigate, and press the Power key to click.

Step 3: Search for the Wipe Data option and select it.

After that, your Android will start the process, which can require a few minutes. However, this process will erase all your user data.

3. Use ADB

This method is very confusing, so follow the steps cautiously on your Android phone to remove the phone lock. With your phone connected to your PC, and the cmd open, type the accompanying commands altogether:

• adb shell
• disc/data/data.com.android.providers.settings/databases
• sqlite3 settings.db
• update system set value=0 where name=’lock_pattern_autoblock’;
• update system set value=0 where name=’lockscreen.lockedoutpermanently’;
• .quit

After you’ve finished this, reboot your Android phone. If this doesn’t reset your lock screen, proceed to the following stage.

With your Android phone connected and the cmd opens, enter:

• abd shell rm/data/system/gesture.key

After entering, reboot your phone once more.

4. Boot into Safe Mode

Step 1: For most phones and your Android, you can do this by opening the power menu and holding the “Power Off.” A message will spring up on your screen, asking whether you might want to Reboot to Safe Mode. Press Ok.

Step 2: Clear data from your lock screen application, uninstall and reboot your phone to escape the Safe mode. When you do so, your Android screen lock will unlock.

5. Crash Lock Screen

This strategy to sidestep a locked screen is only a crisis workaround for the phones in this classification.

• Enter ten asterisks (*) through the dialer application.

• Copy and paste asterisks on the dialer until the “Paste” choice no longer appears.
• Get back to the lock screen and tap on the camera symbol.
• Go to the settings on your Android after pulling down the notifications bar. Now you will have the chance to enter the password, and you must continue the same thing here. Continue to paste until the Android lock screen crashes.

Conclusion

Passwords shield our phones from unapproved access, yet we get locked out unexpectedly on our phone lock. Failing to remember your PIN can be irritating. However, we can assist you in reaccessing your locked phone without a factory reset by using Dr.Fone - Screen Unlock. Dr.Fone is an expert in solving such problems in just a few minutes. So download this expert tool immediately for a quick solution.

Full Guide to Unlock Your Tecno Spark 10C

Yesterday my kid was using YouTube on my Tecno Spark 10C to help solve an assignment. However, it wouldn’t take the Tecno Spark 10C pattern unlock when I tried opening the phone. Maybe the kid has accidentally changed the lock, but I don’t know what to do. Please help me.

This article is for you if you have been locked out of your Tecno phone. Many individuals fail to remember their password or change it accidentally. However, it is not a big deal now. We’ll talk about the best Tecno Spark 10C password unlock tool today.

There are multiple ways to unlock your locked Tecno device. All the solutions mentioned here are effective and work 99% of the time. However, we suggest you use Dr.Fone. Dr.Fone is expert software to answer all your Android needs. It is safe, secure, and free of data loss.

Part 1: 3 Easy Ways to Remove Your Tecno Spark 10C Lock

1. Google Find My Device

Google Find My Device is an inbuilt feature in Tecno phones to unlock your phone through Google accounts. You can utilize it to unlock the Tecno screen lock. However, you need to know that you will lose all your files on the Tecno phone after the Tecno Spark 10C password unlocks. Therefore, make sure to back up your data before proceeding with the following steps:

• Ensure your locked Tecno phone is connected to your Google account and WiFi/Data. Then open the Find My Device site on a PC, and sign in with your phone’s Google account.
• Kindly select your device, and tap the “Erase Device” option.
• Type your Google account credentials once more. Then, click the “Erase” symbol to begin the unlocking system. That will remove the pattern lock from your OPPO, and you can open it without effort.

Click here

2. Answer Security Questions

This method is for you if you have set security questions while making your Google ID. By addressing those questions, you can unlock the Tecno Spark 10C screen lock. In any case, this way is invalid on some old Android phones.

To unlock this way, you need to press the Forgot Password option. If you can’t see the “Forgot Pattern/Password button on your phone, follow these steps:

• Try unlocking your Tecno smartphone with some wrong patterns a few times. Then you will see the “Forgot Pattern” symbol on the screen and tap it.
• Select the “Answer question” option to get to your security questions. Then, at that point, answer each of them correctly.

• It will automatically unlock your device if you answer all questions accurately. Then, it will expect you to set another screen lock for your OPPO. Therefore, keep the new PIN to yourself.

3. Hard Reset

If you wouldn’t worry about losing your user data, you can attempt this unlock method for your Tecno Spark 10C. You won’t require any account or applications. It requires you to have sufficient battery life. It is simple. So let’s see how it is done.

• Check whether the battery percentage is over half. Then power off your Tecno phone by holding the “Side/Power” key for around 10 seconds.
• Press and hold the “Volume Down” and “Side/Power” buttons till the Tecno logo appears on display. Then, at that point, your phone is in recovery mode.
• Utilize the volume keys to pick the “Wipe Data/Factory Reset” choice, and press the “Side/Power” button to select it. Then, at that point, pick “Yes” to go on. You can reboot your Tecno after the reset is finished, and the lock will be no more.

Part 2: The Efficient Tool for Your Tecno Spark 10C Unlock

Dr.Fone - Screen Unlock (Android) offers a wonderful tool that works to unlock Tecno devices rapidly. This lock screen remover tool can unlock your phone from every five locks: PIN, passcode, face lock, pattern, or fingerprint in only a couple of basic steps. It works with all the Tecno models hassle-free. So, download it right away for a safe unlocking experience. Here’s how you can use it:

Step 1. Start your hard reset from Dr.Fone

Make your Tecno Spark 10C phone connected to the PC through a USB cable. Then, at that point, click “Screen Unlock” > “Android” on the program.

Step 2. Select Unlock Android Screen

When you arrive at this page, please choose the button “Unlock Android Screen”.

Step 3. Select device brand

We’ll offer you a phone brands list, almost all Android devices are here, for example, Samsung, Huawei, OPPO, Vivo, Lenovo, LG, etc. Then Select Tecno to continue.

Step 4. Unlock your Tecno Spark 10C now

The following steps are the key to unlocking your Tecno device. Attention! The unlock process will also wipe your data!

Great! Now the unlocking progress is done, and you can use your phone without entering password.

Bonus Tips: The Importance of Backing Up Your Android Data Regularly

The data loss on your Android phone or tablet can be extremely unpleasant. Subsequently, it’s suggested that you back up your Android phone or tablet consistently. It will keep you from losing your data. As an expert application, Dr.Fone Backup and Restore (Android) can help back up a wide range of data and settings on Android. In the meantime, it lets you review and restore the backup documents to another phone. Here’s how:

• Open the Dr.Fone software on your computer, and connect your phone to the PC through a USB connector and click OK. Then select the “Back up device” option.

• Tap the Backup option to begin the process.

• The process will require some time.
• After it is done, you can see where the backup is stored by clicking on the “View BackupS” option.

Click here

Conclusion

All the best Tecno Spark 10C password unlock tools are displayed above. They are helpful, dependable and safe to use. However, if you need the easiest tools, you must pick the Android Screen Unlock program. In this case, the Dr.Fone - Screen Unlock (Android) can unlock your Tecno phone without any issue. Therefore, we strongly suggest you use Dr.Fone for backup and unlock your device.

How to Bypass Android Lock Screen Using Emergency Call On Tecno Spark 10C?

The main reason why we keep our smartphone locked is to prevent children (or stalkers) checking out our private photos or messages. You don’t want anyone to access your pictures, emails, or other important data. What if you forget your pattern or PIN and cannot access your phone? Or someone changes lock screen pattern to leave you annoyed?

To avoid such types of conditions, we have tried and tested the following methods to bypass the Tecno lock screen pattern, PIN, password, and fingerprint.

Method 1. Use ‘Find My Mobile’ feature on Tecno Phone

All Tecno devices come with the “Find My Mobile” feature. To bypass the Tecno lock screen pattern, PIN, password, and fingerprint, you can just follow the below steps to get it done.

• Step 1. First, set up your Tecno account and log in.
• Step 2. Click the “Lock My Screen” button.
• Step 3. Enter a new PIN in the first field
• Step 4. Click the “Lock” button at the bottom
• Step 5. Within a few minutes, it will change the lock screen password to the PIN so that you can unlock your device.

Method 2. Use Android Device Manager to Bypass Tecno Password

To know how to unlock a Tecno phone lock password with Android device manager, make sure the Android Device Manager is enabled on your device.

• Step 1. Visit google.com/android/devicemanager on other smartphones or PC.
• Step 2. Log into your Google account that you used on your locked device.
• Step 3. Choose the Tecno Spark 10C device you want to unlock in ADM interface
• Step 4. Click on the “Lock” option.
• Step 5. Enter a password. There is no need to enter any recovery message. Select “Lock” again.
• Step 6. You would see a confirmation below if it is successful, with “Ring, Lock and Erase” buttons.
• Step 7. Now you must get the password field on your phone where you can enter your new password, and your phone will be unlocked.
• Step 8. Go to lock screen settings on your device and disable the temporary password.

Method 3. Google Login (Supports Only Android 4.4 or Lower)

If your device is still running on Android 4.4 or lower, here’s how to bypass the Tecno lock screen fast.

• Step 1. Enter the wrong pattern for five times
• Step 2. Choose “Forgot Pattern”
• Step 3. Enter your Google account login or backup PIN
• Step 4. Now your phone would be unlocked.

Method 4. ‘Pattern Password Disable’ and Custom Recovery (SD Card needed)

To bypass the Tecno lock screen in this method, you ought to be an advanced user who knows what are “custom recovery” and “rooting”. You have to install any kind of customer recovery, and you should have an SD card on your phone. SD card is required to move a ZIP file to the phone, and it is the only way to transfer the file when the Tecno Spark 10C device is locked.

• Step 1. Download a zip file named “Pattern Password Disable” on your computer and move it to the SD card of your Tecno device.
• Step 2. Insert the card on your device
• Step 3. Restart your device into recovery mode.
• Step 4. Flash the file on your card and restart the phone.
• Step 5. Now your phone would boot up without lock screen. Don’t worry if you had a gesture lock or password. All you need to do is to input a random gesture or password, and it will be unlocked.

Method 5. Delete the Password File Using ADB

It is yet another option that will work only when you have enabled USB Debugging previously on your device, and your PC is allowed to connect via ADB. If you meet such requirements, it is ideal to use this method to unlock the Tecno lock screen.

• Step 1. Connect your device to the PC using USB cable and open command prompt in the adb directory. Type the command “adb shell rm /data/system/gesture.key” and then press “Enter”.
• Step 2. Restart your phone, and a secure lock screen must be gone, and you can access your device. Be sure to set a new PIN, pattern, or password before rebooting again.

Method 6. Factory Reset to Bypass Tecno Lock Screen

A factory reset is the best option in almost any case if one of these solutions couldn’t work. According to your device type, the process may vary. In most devices, you have to turn off the Tecno Spark 10C device completely to start the process. But this method will delete all the precious data on the Tecno Spark 10C device after the factory reset.

• Step 1. Hold the power button and volume down at the same time. It will open the Bootloader menu.
• Step 2. Press the volume down button two times to choose “Recovery Mode” and select it by pressing the “Power” button.
• Step 3. Hold down the power button and tap “Volume Up” once, and you would enter “recovery” mode.
• Step 4. Choose “Wipe Data/Factory Reset” option by using volume buttons.
• Step 5. Select it by pressing the Power button.
• Step 6. Select “Reboot System Now” once the process is done.

Backup your Tecno phone regularly in case of any data loss in the future.

Method 7. Boot into Safe Mode

Chances may be that you are using a third-party lock screen app. Then lucky for you, this way works best to bypass the Tecno lock screen. Specifically, you can boot your Tecno device into Android Safe Mode .

• Step 1. Open up the Power menu from the lock screen and press and hold the “Power Off” option.
• Step 2. It will ask if you want to boot in safe mode. Tap “OK”
• Step 3. Once the process finishes, it will temporarily disable the lock screen activated by the third-party app.
• Step 4. Uninstall the third-party lock screen or just reset the data.
• Step 5. Reboot your device and get out of safe mode.
• Step 6. Now the irritating lock screen app is removed completely.

Method 8. Other Methods

• Step 1. Take your friend’s phone to call on your locked phone.
• Step 2. Accept the call and press the back button without disconnecting.
• Step 3. Now you can access the Tecno Spark 10C device completely
• Step 4. Go to the security settings of the Tecno Spark 10C device and remove the pattern or pin.
• Step 5. It will ask you the correct pin that you don’t know, guess, and try various combinations you can recall.

To avoid forgetting your password or PIN next time, be sure to write the pattern or numbers on a text file or paper to keep them safe. If you have to bypass the Tecno lock screen pattern, PIN, password, and fingerprint, you may consider using Dr.Fone - Screen Unlock (Android). It is a professional tool that can remove all the fingerprints, pattern, and password lock screens without losing any data on your phone.

Also read: