How To Remove Screen Lock PIN On Tecno Spark Go (2024) Like A Pro: 5 Easy Ways

When protecting personal information on your phone, setting up a lock screen is essential. If you’ve ever forgotten your screen lock PIN on Android, you know how frustrating it can be to get back into your device. If you’ve ever tried to remove the screen lock PIN on an Android device, you know it’s not that easy.

It depends on your phone and the type of lock code you have set up. Note that this will erase all your data from the phone, so be sure to back it up first. This post will teach you how to remove the screen lock PIN on Android devices using several methods. So if you cannot use your device, keep reading for the steps!

Part 1: How To Remove Screen Lock PIN On Tecno Spark Go (2024)? 5 Simple Ways

If you’ve forgotten your screen lock pin, there’s no need to worry. Here are quick and easy ways to remove the screen lock PIN on your Android device.

1. Change or Remove in Settings

When you go to Settings > Lock Screen > Screen lock type, several lock screen options are available. These options are given below:

Swipe:

You can unlock your phone by swiping in any direction on its screen.

Pattern:

You will draw a pattern on a 3-by-3 grid of dots to unlock your phone this way. To do this, you’ll need to use your finger to connect the dots in the pattern.

Phone Pin:

When you choose a PIN, make sure it’s something easy to remember. But choose wisely- a PIN that’s too easy to guess can put your account at risk.

Password:

It is the highest level of security available for your phone. Passwords should contain seven characters, of which at least one must be a letter. They should also be both unique and memorable.

Face recognition:

By holding your face directly in front of the phone screen, you can unlock your phone and verify yourself in apps.

Fingerprints:

Touch your phone to open it quickly and easily.

Iris:

Verify that only the contents of your phone are visible to your eyes.

Intelligent Scan:

Unlock your device with both facial and iris recognition.

If you’ve forgotten your lock PIN on your Android device, don’t worry - there are a few ways to reset it. Here’s how:

Step 1: Select Lock Screen > Screen lock type from the Settings menu.

Step 2: When prompted, enter your current lock screen code.

Step 3: Select None from the list.

2. Disable Android Device Manager

It is not possible to remove the PIN from some Android devices. The Android device administrator can be disabled in this situation. Here’s how to universal unlock a PIN for Android:

Step 1: From the “Settings” option, select the “Security” option and click on it to begin.

Step 2: Select “Device Administrators” from the menu, and you will see a list of apps that may restrict your ability to change the settings.

Step 3: Choose the Android device manager from the list.

Step 4: Click on “Disable.”

3. Remove PIN from Google Find My Device

Even if you don’t remember your Android lock PIN, you can use Find My Device to eliminate your Android lock PIN. Sign in to Google Play, turn on Find My Device and Location, and connect your locked phone to the internet.

Here’s the guide to universal unlock PIN for Android:

Step 1: Log into your Google account on your computer and visit Google Find My Device.

Step 2: Tap the “ERASE DEVICE” icon on your device and enter your account information again.

Step 3: To remove Android phone settings and data, click the “Erase” icon. Once that is done, you will erase the phone PIN.

4. Factory Reset Your Tecno Spark Go (2024) (Data Loss)

A factory reset in Recovery mode can also be used to remove the forgotten phone PIN lock on an Android device. It is important to note that you will lose everything on your device if you universal unlock your PIN for android.

Steps to get rid of forgotten phone PIN via factory reset:

Step 1: Turn off your Android phone by pressing and holding the Power button.

Step 2: To enter Recovery mode, press and hold the Volume Down + Power buttons simultaneously. Hold the buttons until the Start menu appears.

Step 3: After selecting Recovery mode with the Volume Down button, press the Power button to confirm.

Step 4: Select Wipe data/factory reset using the Volume buttons. Press Yes to confirm the operation.

Step 5: Once your device has been factory reset, you need to restart it by selecting the Reboot system now option.

Part 2: Is There Any Universal Unlock PIN For Android?

Dr.Fone - Screen Unlock (Android)

Remove the Screen Lock Pin Without Any Hassle!

• Completely unlinked from the previous Google account, it won’t be traced or blocked by it anymore.
• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Almost all Samsung phones and tablets are supported (Currently for Android 6-12).
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

While there is no “universal unlock pin” for Android devices, Dr.Fone - Screen Unlock can bypass the lock screen on many popular phone models, including Samsung, LG, Motorola, Sony, HTC, Huawei, and more. Its simple interface makes it easy to use, even for those who are not tech-savvy.

Step 1: Select “Screen Unlock” from all the tools in Dr.Fone.

Step 2. Select Unlock Android Screen

We provide 2 options for you, and to unlock screen, you should select “Unlock Android Screen”.

Step 3. Select device model

There are still 2 buttons to choose, “100% Remove Screen Lock” is for most Android brands, but please back your device up before you pick it.

Check the brands’ list and make sure your unlock process keeps.

Step 4. Enter into Recovery Mode

With examples of Samsung phones, it’ll be clearer to understand how to unlock your Android phone via Recovery Mode.

Note: The specific processes are various according to different brands.

Recovery Mode in Samsung phone with Bixby

Recovery Mode in Samsung phone without Bixby

Recovery Mode in Samsung phone with Home Button

Step 5. Instructions to Wipe Cache Partition

Steps in Recovery Mode are really important. Find the correct options and your locked screen will be removed.

Now it’s a phone everyone can access without a password or pattern.

EaseText Audio to Text Converter for Windows (Personal Edition) - An intelligent tool to transcribe & convert audio to text freely

Part 3: In What Cases Should We Remove PIN On Our Android Phone?

There are a few reasons why you might want to remove the phone PIN from your Android:

/a>

1. Failed Attempts

If you’ve tried to unlock your phone with a pin too many times and failed, your phone will become locked. In this case, you’ll need to remove the PIN to unlock it.

NeoDownloader - Fast and fully automatic image/video/music downloader.

2. Buy a Used Android phone

When you buy a second-hand Android phone, it’s best to remove the previous owner’s pin for security reasons. You can enter the phone’s settings and remove the PIN under the security section.

The Bottom Line

It can be frustrating when you forget your screen lock pin. You’re stuck staring at your phone, unable to use it or access any of your important data. But don’t worry; there are a few ways you can try to remove the screen lock pin on your Android device.

Luckily, Wondershare Dr.Fone - Screen Unlock is a powerful and easy-to-use lock screen removal tool that can help you bypass your lock screen in just a few minutes. Plus, it’s compatible with a wide range of Android devices, so you can use it regardless of what type of phone you have.

How to Reset a Tecno Spark Go (2024) Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Tecno Spark Go (2024) phone that is locked, or how to get into a locked Tecno Spark Go (2024) phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Tecno Spark Go (2024) Phone that is locked?

Before you go to reset your locked Tecno Spark Go (2024) phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Tecno Spark Go (2024) phone typically involves performing a factory reset. The process erases all data and settings on the Tecno Spark Go (2024) device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Tecno Spark Go (2024) , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Easy and Safe Partition Software & Hard Disk Manager

Part 2: How to Reset a Tecno Spark Go (2024) Phone That is Locked With Google Find My Device?

Resetting a locked Tecno Spark Go (2024) phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Tecno Spark Go (2024) phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Tecno Spark Go (2024) phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Tecno Spark Go (2024) phone that is locked without a password?

In order to reset your Tecno Spark Go (2024) phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Tecno Spark Go (2024) phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Tecno Spark Go (2024) Phone That Is Locked Without a Password!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Work for forgotten passwords, second-hand Tecno Spark Go (2024) devices, etc.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Tecno Spark Go (2024) phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Tecno Spark Go (2024) .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Tecno Spark Go (2024) device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Tecno Spark Go (2024) Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Tecno Spark Go (2024) phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Tecno Spark Go (2024) phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Tecno Spark Go (2024) Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Tecno Spark Go (2024) device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Tecno Spark Go (2024) phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Tecno Spark Go (2024) phone with Gmail ID and password

It is imperative to understand that unlocking your Tecno Spark Go (2024) Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Tecno Spark Go (2024) phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Tecno Spark Go (2024) device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Tecno Spark Go (2024). This way, you can sneak back into the system once again.

PCDJ DEX 3 for Windows & MAC is the total entertainment DJ software solution, offering audio, video, and karaoke mixing ability. Automatic beat-sync, smart looping, 4 decks, DJ MIDI controller support, Karaoke Streaming and much more.
DEX 3 meets the demands of today’s versatile DJ, without compromise!
DEX 3 (Audio, Video and Karaoke Mixing Software for Windows/MAC | 3 Activations and Free Updates)

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Lyric Video Creator Professional Version

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

Jet Profiler for MySQL, Enterprise Version： Jet Profiler for MySQL is real-time query performance and diagnostics tool for the MySQL database server. Its detailed query information, graphical interface and ease of use makes this a great tool for finding performance bottlenecks in your MySQL databases.

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Tecno Spark Go (2024) phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Tecno Spark Go (2024) phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

How to Unlock Tecno Spark Go (2024) Phone Pattern Lock without Factory Reset

Have you been locked out of your Android device and can’t seem to recall its pattern? Do you wish to learn how to unlock an Android phone pattern lock without a factory reset to access someone else’s device? If your answer is “yes”, then you have come to the right place. Lots of readers these days ask us about a foolproof way to learn how to unlock an Android phone pattern lock without a factory reset. To help you, we have decided to come up with an in-depth guide on the same. Read on and learn in 4 different ways.

Part 1: Unlock the Android Phone Pattern with Lock Screen Removal Tool

If you are locked out of the phone because forgot pattern lock, and fail to enter the phone after many times try with the word “phone has been locked”. No need to worry, there are many solutions to fix the issue. And Dr.Fone –Screen Unlock (Android) can be your first saver in the dilemma. It is a highly efficient pattern lock removal tool for over 2000+ mainstream android phones, like Samsung, Oneplus, Huawei, Xiaomi, Pixel, etc.

Except for pattern locks unlocking, it works for the PIN, fingerprints, Face ID, and Google FRP bypassing as well. It’s helpful even if you don’t know the OS version of your devices. So, now follow the below steps to unlock the pattern and regain access to your locked phone in minutes.

Screensaver Factory, Create stunning professional screensavers within minutes. Create screensavers for yourself, for marketing or unlimited royalty-free commercial distribution. Make screensavers from images, video and swf flash, add background music and smooth sprite and transition effects. Screensaver Factory is very easy to use, and it enables you to make self-installing screensaver files and CDs for easy setup and distribution. Screensaver Factory is the most advanced software of its kind.

Dr.Fone - Screen Unlock (Android)

Get into Locked Phones within Minutes

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Easily remove the lock screen; No need to root your device.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate

4,008,669 people have downloaded it

Step 1. Download Dr.Fone –Screen Unlock on your PC or Mac.

Step 2. Connect your Android phone to the computer using a USB cable. Next, click the “Unlock Android Screen“ from the interface.

Step 3. Choose the model version according to your android phone. For people who don’t know the operating system version, tick the circle “I can’t find my device model from the list above”.

Step 4. Enter and download the recovery package as the instructions show on the PC or Mac.

Step 5. It will be finished when the recovery package downloading is completed. Then, click “Remove Now“.

Once the whole progress is over, you can access your Android device without entering any password and view all your data on the Tecno Spark Go (2024) device with no limits.

Nero Burning ROM:
The ultimate burning program for all your needs!

safe & secure

Part 2: How to unlock the Android phone pattern lock without resetting using a Google account?

If you have an older Android device, then you can simply move past its lock by taking the assistance of your Google account. All you need is access to the same Google account that is linked to your device. Though, this technique will only work on devices running on Android 4.4 and earlier versions. To learn how to remove pattern lock on Android without a factory reset, follow these steps:

Step 1. Simply provide any pattern on the Tecno Spark Go (2024) device. Since the pattern would be wrong, you will get the following prompt.

Step 2. Tap on the “Forgot Pattern” option located at the bottom of the screen.

Step 3. This will provide different ways to access your phone. Select the Google Account details and tap on the “Next” option.

Step 4. Sign in using the credentials of the Google account that is linked to your device.

Step 5. Great! Now you can simply provide (and confirm) the new pattern for your device.

After following these instructions, you would be able to learn how to unlock an Android phone pattern lock without factory reset or causing any harm to your device.

Part 3: How to unlock Android phone password without factory reset - Android Device Manager

The Android Device Manager, which is now known as “Find My Device” is one of the best ways to locate your Android device remotely. Besides that, you can also use the interface to ring your device or change its lock from anywhere. All you need to do is access its interface from any other device and log-in with your Google credentials. You can follow these steps to learn how to unlock the Android pattern lock without factory reset.

Step 1. Log in to Android Device Manager (Find My Device) using your Google credentials.

Android Device Manager website: https://www.google.com/android/find .

Step 2. From the interface, you can select the Android device that is linked to your Google account.

Step 3. You will get options to ring it, lock it, or erase it. Select the “Lock” option to proceed.

Step 4. This will launch a new pop-up window. From here, you can provide a new lock screen password, confirm it, and also set an optional recovery message or phone number (in case your device has been lost).

Step 5. Confirm your choice and save it to remotely change the lock screen password on your device.

In the end, you would be able to learn how to unlock an Android phone pattern lock without a factory reset after following these above-mentioned steps.

Part 4: How to unlock Android phone pattern lock without factory reset using ADB?

By using Android Debug Bridge (ADB), you can also learn how to unlock the Android pattern lock without a factory reset. Though, this is a more time-consuming and complicated process than other alternatives like Dr.Fone. Nevertheless, you can learn how to remove pattern lock on Android without factory reset using ADB with these instructions:

Step 1. To start with, you need to download ADB on your system. This can be done by visiting the Android Developer’s website https://developer.android.com/studio/command-line/adb.html .

Step 2. Afterward, launch the installer and download all the essential packages on your system.

Step 3. Now, connect your phone to the system. Make sure that its USB debugging feature is on.

Step 4. To do this, go to Settings > About Phone and tap the “Build Number” option seven consecutive times. This will enable the Developer Options on your device.

Step 5. Go to Settings > Developer Options and turn on the feature of USB debugging.

Step 6. After connecting your device to the system, launch the command prompt in the installation directory on your respective ADB.

Step 7. Type the command “ADB shell rm /data/system/gesture.key” and press enter.

Step 8. Simply restart your device and access it the usual way, without any lock screen pattern or pin.

Conclusion

Now when you know how to unlock the Android phone pattern lock without a factory reset, you can easily access your device in a trouble-free way. Out of all the provided options, Dr.Fone - Screen Unlock (Android) is the best alternative. It provides a fast, secure, and reliable way to unlock your device without causing any harm or removing its content. Go ahead and give it a try and share these solutions with your friends and family as well.