How to Reset a Locked Xiaomi Redmi A2+ Phone

There might be some moment when you have accidentally locked your phone and have no way to recover the phone’s functionality without resetting. This moment is very much irritating to any of you. If your phone is locked, and you can’t run your phone due to forgetting the password, you don’t have to be dumbfounded. There are some ways by which you can recover your phone to its previous state. In this article, we will show you how to reset a locked phone.

Part 1: How to Hard Reset Locked Xiaomi Redmi A2+ Phone

The most common way of resetting an Android phone screen lock is by hard reset. You can hard reset your Android phone to unlock it. Remember, hard reset will erase all the data stored on your phone. So hard reset will unlock your phone, but you will not get your stored data back on it. So if you have no recent backup for your phone data, beware of that before going for a hard reset.

Here you can learn how to reset a locked phone from different brands, as different models or brands have unique methods of resetting.

1. How to reset a locked HTC phone?

Now we will show you how to unlock HTC phone by hard reset.

You will have to press and hold the volume down button along with the power button. Keep holding until you see Android images. Then release the buttons and then follow the volume down button to go for factory reset, afterward select the power button.

2. How to reset a Samsung phone that is locked?

Press and hold the volume up key, along with the power button and home key. You will see the Samsung logo onscreen. Go down to wipe data/factory reset by holding the volume down key. Now choose Yes. You could delete all the data on your phone by tapping on the volume down key. Your phone will start rebooting.

3. How to reset an LG phone that is locked?

To unlock your LG Android phone, you will have to press and hold the volume key and the power or lock key. You have to release the Lock or power key when you see the LG logo on the screen of your phone. Just after that, press and hold the power or lock key again. You can release all the buttons once you see a factory hard reset on the screen.

4. How to reset a locked Sony phone?

You have to confirm that your phone is switched off. Press and hold three keys altogether. The keys are Volume Up, Power, and Home keys. You have to release the buttons once you see the logo on the screen. Now follow volume down to scroll down. Power or Home key is used for selection. Choose factory reset or wipe data.

5. How to reset a locked Motorola phone?

Firstly, switch off your phone. Then press and hold the power key, home key, and volume up key. After a while, you will see the logo on the screen, just then release all the buttons. For scrolling, you can use the volume down key, and for selecting, you can use either home or power key. Now select factory reset or wipe data.

Whatever your model or brand is, keep in mind that hard reset will delete all your valuable data from your phone! So if you want to unlock your locked phone without losing data from it, then follow the next part.

Part 2: Reset Android Phone Screen Lock Without Password

In this part, we will discuss Wondershare Dr.Fone for unlocking your locked Android device. Here are some of the features of this great software -

Dr.Fone - Screen Unlock (Android)

Remove Android lock screen in 5 minutes

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• Unlock mainstream Android brands like Samsung, Huawei, LG, Xiaomi, etc.
• No tech knowledge required. Everyone can handle it.

3981454 people have downloaded it

Here is the step-by-step procedures for unlocking your Android phone - other Android phones can also be unlocked with this tool

Step 1. Go for “Screen Unlock”

The first thing that you will have to do is open Dr.Fone on your PC and then click on Screen Unlock that allows your device to remove the password from any of the 4 types of lock screens (PIN, Password, Pattern, and Fingerprints).

Step 2. Select the Xiaomi Redmi A2+ device from the list.

Step 3. Go for Specific Mode

Step 4. Remove Lock Screen without Password

Once the previous step is complete, you will see the lock screen removal process started. After completing the lock screen removal process, you could enter into your phone without needing any password.

safe & secure

Conclusion

Forgetting your password is a perplexing situation though you have the solution to unlock your Android phone, as hard reset does not give your data back, you should rely on the software called Dr.Fone - Screen Unlock (Android) for smooth operation. So have the software and cheer up. I hope you will enjoy and forget about the hassle when you lost your password.

How To Unlock Xiaomi Redmi A2+ Phone Without Password?

Has your Android smartphone been locked, and are you having trouble unlocking it now because you have forgotten phone password? Looking for methods to remove the password from your Android phone without doing a factory reset?

If the answer is “YES,” you’ve come to the correct spot.

Many people, including you, have had similar issues and wish to know how to unlock an Android phone without a password.

As a result, we have created some of the greatest guidelines or, you might say, top ways that may assist you in unlocking Android phones today, simply for you and countless other Android users.

Part 1: Unlock Your Locked Screen Without Password By 6 Efficient Ways

1. By your Google account

You can use your Google Account to unlock the Android phone password if, after several tries, you are still unable to do so without doing a factory reset.

You need to log into the Google account that is associated with the Xiaomi Redmi A2+ device, then do the following:

• The unlock pattern may only be used five times before a notification telling you to try again in 30 seconds appears.
• “Forgot pattern” will show up at the bottom of the screen.

• You must enter the Gmail account that is associated with the Xiaomi Redmi A2+ device here before selecting “Next.”

• That’s it; from this point forward, you may enter any new PIN or pattern that you can recall to unlock your smartphone.

2. Google Find My Device

Using your Google account is a superb method for finding the Xiaomi Redmi A2+ device when lost or stolen.

In addition, it may be used to lock or ring your smartphone. You may have noticed that there are three options available when using this feature: “Ring,” “Lock,” and “Erase.”

To bypass the Android lock screen, all you need to do is sign into the Xiaomi Redmi A2+ device’s associated Google account and then follow these steps:

• On any Android device or a computer, go to <www.google.com/android/find> and sign in using your Google account. Choose the Android smartphone you wish to unlock after that.
• After choosing the Xiaomi Redmi A2+ device, select one of the three options, “lock,” from the list.
• There will be a new pop-up window that you can use to change the Xiaomi Redmi A2+ device password. Additionally, you can choose to add a phone number or recovery email.
• Confirm it immediately, then input the password you just established on your locked device.

Many Samsung customers have this issue, which prevents them from using their devices. Try using the “Find My Mobile” feature on your mobile if you wish to unlock it if you’re a Samsung user. It would be helpful if you had a Samsung or Android model account.

After that, use Find My Device to unlock your Android phone without losing any data by following the instructions below:

• Sign in with your Samsung account at findmymobile.samsung.com.
• Choose “Lock my screen” from the menu on the left, type a new PIN in the box given, and then click “LOCK.”

Your smartphone will be unlocked, and the password will be changed to the new one after a brief delay.

3. Use ADB (Android Debug Bridge)

Without a factory reset, Android phone passwords may also be unlocked using the Android Debug Bridge (ADB).

• You must first download ADB to your computer. Visit the Android developer’s website at https://developer.android.com/studio/command-line/adb.html to do this.
• Launch the installer after that to begin downloading crucial software for your machine.

• Here, you must use a USB cable to connect your Xiaomi Redmi A2+ to the computer
• This will activate the developer option on your smartphone if you navigate to Settings > About Phone > and choose the “Build Number” option seven times.
• After that, activate USB debugging by going to Settings > Developer Options.

• Launch the command prompt in the ADB installation directory after your device is connected to the system.
• Press enter after typing “ADB shell rm /data/system/gesture.key” into the command line.

• Finally, just restart your smartphone and use it as normal.

4. Hard reset (data loss)

Each brand has a unique method for hard resetting a locked Android device. The methods to factory reset locked Android devices from Samsung, LG, HTC, Sony, and Huawei are compiled here.

When your phone is locked, you may access the recovery menu of your phone using its physical keys and choose to hard reset the Xiaomi Redmi A2+ device. Here’s how to restore a locked phone to factory settings.

• Use the buttons to see the recovery menu.
• Press and hold the Volume Up and Side buttons simultaneously until you see the brand logo on the screen for Android devices without a Power/Bixby/Home button.
• Press and hold the Volume Up, Bixby, and Power buttons all at once if your smartphone has a Power button. Releasing them before a logo arises is advised.
• Use the Volume Down key to highlight Wipe data/factory reset when the Android system recovery option displays, then hit the Power/Bixby key to choose it.
• Allow a few seconds for the factory reset procedure to finish after selecting Yes, or Factory data reset. The phone will reboot once you pick the Reboot system. Now you may configure it as if it were a brand-new gadget.

5. Unlock from Forgot Pattern (android 4.4 or lower)

This is another choice that might assist you in unlocking your phone without a factory reset or password. You may have observed that when pattern lock was enabled on your device, a security PIN question was also prompted at that time.

Therefore, you have the choice to Backup PIN, which might assist you in unlocking your smartphone, if you are unable to unlock it. To do it, take the following actions:

• Click on Android pattern lock.
• You’ll see a notification telling you to try again in 30 seconds after failing many times.
• The “Backup PIN” option will be there; choose it.
• Put the backup PIN and OK here.
• At last, you may unlock your cellphone by entering the backup PIN.

6. Boot into safe mode

Here’s how you can boot into safe mode.

• Hit the power button on your phone.
• Press and hold the volume down button on your phone as the animation begins. Hold it down until the animation is finished and your phone enters safe mode.
• “Safe mode” will be shown at the bottom of your screen.
• Out of safe mode
• Switch off your phone.
• Press the Power button on your phone for around 30 seconds, or until the Xiaomi Redmi A2+ device restarts.
• You will see that after entering and booting into the safe mode, the lock option will not be visible.
• Then you will also see the option to turn off boot.
• You can get rid of the locked phone by proceeding with that option.

Part 2: Easy Tool To Unlock Android Phone Without Password

If you forget the lock code, you can simply unlock your Android phone using Dr.Fone - Screen Unlock.

Have you encountered the same situation? Do not fret. You may use Dr.Fone - Screen Unlock to unlock the screen lock on Android smartphones. It enables you to erase an Android phone’s password, PIN, pattern, and fingerprint.

Let’s learn how to safely remove the Android lock screen.

Step 1: Connect your phone

Open Dr.Fone on your PC, then select “Screen Unlock” from the list of tools.

The Dr.Fone functionality is still usable with the old UI of the Dr.Fone Mac version, but we will update it as soon as we can.

Connect your Android phone to the PC via a USB cable. then click the “Unlock Android Screen” button on the software.

Step 2. Choose a device model

Nearly all Android devices feature locked displays, including Android. Because the recovery kits for different phone models vary, it’s important to pick the correct device brand to unlock the lock. Every model of supporting hardware is included in the list.

Step 3. Switch to download mode

If you then adhere to the instructions on the software, the phone will enter Download Mode.

• Offset your phone.
• Hold down the Power, Home, and Volume Down keys all at once.
• Use the Volume Up button to start Download Mode.
• Remove the Android lock screen starting now..

Step 4. Download a package for recovery

The recovery package will begin downloading once you set your device in download mode. Wait only till it is completed.

Step 5: Unlock Android without erasing data

After the recovery package download is finished, click “Remove Now.” This operation won’t harm any data on your Android device.

When everything is done, you won’t need to enter a password to access your Android smartphone, allowing you to see all of your data without any limitations.

Bonus Tips: How To Keep Our Data Safe?

Dr.Fone - Phone Backup is an excellent solution to keeping data safe and secure and baking it up before resetting your device, even if you have forgotten your password. You may quickly and conveniently back up practically all forms of Android phone data with Dr.Fone - Phone Backup (Android). Additionally, you may examine and export only certain types of data.

Here’s how you can use Dr.Fone - Phone Backup to keep data safe.

Step 1: Connect your Android phone to your PC.

Open Dr.Fone on your PC, then select “Phone Backup” from the menu.

Next, join your Android phone to the computer with a USB cable. The phone must be in USB debugging mode, please. You will be prompted to approve USB Debugging in a pop-up window on the Android phone if your version of Android is higher. Press the OK button if you would.

Click Backup to start backing up the data on your Android device.

If you have previously used this programme to back up your device, you may review your backup history by clicking on “View backup history.”

Step 2: Choose which file types to backup.

Once the Android phone is connected, select the file types you want to backup. Dr. Fone has previously examined all the file types for you. After that, click Backup to start the backup process.

It will cost some time for the backup. Do not disconnect your Android phone from the computer, use it, or delete any data while making a backup.

When the backup is complete, you may click the View the backup button to see what’s in the backup file.

The Bottom Line

It would be best if you had been able to answer the question, “How to unlock an Android phone without password,” using the techniques we have demonstrated here. The most effective way for resetting an Android phone is Wondershare Dr.Fone - Screen Unlock for Android. You may quickly reset a locked Android phone without a password with only a few clicks.

How to Unlock Xiaomi Redmi A2+ Phone without Google Account?

Uh oh – you’ve forgotten your Android Unlock code, and you can’t get it online to unlock using Google. Nothing could be more frustrating than gazing at your phone, knowing that it is essentially a paperweight at this point. Unless you can get it unlocked, your phone is useless, and all of your important photos, text messages, and content are all locked out of your reach. While right now, nothing can do without a Google account. But you can try to reset your Google account first.

Part 1: How to Bypass Lock Screen on Android device with Google Account (Android Device Manager)

Even if you have a Google account, if your phone isn’t connected to the internet, you cannot access it to unlock your phone. If this sounds familiar, you can always try this method.

1. First, navigate to the Android Device Manager page. You will need to sign in with the Google account that you use to set up your phone.

Android Device Manager link: http://www.google.com/android/devicemanager

2. Once you have logged in, you will automatically be redirected to the Android Device Manager page. If this is your first time, click the “Accept” button.

3. A list of all of the Xiaomi Redmi A2+ devices registered to this Android account will pop up. Select the Xiaomi Redmi A2+ device in question from this list.

4. The Android Device Manager will then locate your device. Make sure it is turned on!

5. After it has been located, you will have a few options for what to do next. If you do not know your phone’s location, you can call it from this screen, but if you know where it is, click the ‘Enable Lock & Erase’ option.

6. A notification will pop up on your device; confirm it.

7. At this point, you will be asked to create a new lock screen password. Once you have chosen one, press “Lock.”

8. Now, simply enter the new passcode on your device, and voila! It will open, and you can get back to your daily routine.

Part 2: How to Reset Your Google Account on your Android Phone

If you have forgotten your Google Account password, it is still possible to unlock your account and access the information within. Here is how you can unlock your Google account on your Android phone.

1. On your browser, go to the Google home page and try to sign in. You will fail, but that is good! It will lead you to the next step.

2. Since you cannot sign in on the sign-in page, you can now select the ‘Help’ link.

3. Choose the “forgot password” option. You will be prompted to enter your email address to proceed.

4. Two options will then appear: the first is your phone number, and the other asks you for your backup email.

5. Enter either one of these options, and you will receive a verification code via email, SMS, or a telephone call from an operator. If you have chosen to enter your backup email, at this point, you will receive detailed instructions on how to access the ‘reset password’ page.

6. Once you have been redirected to the ‘reset password’ page, you can input your new login information.

7. Finally, you can unlock your Google account on your Android! Confirm this by clicking the “Change Password” button. Success!

Part 3. How to Remove Locked Screen on Android using Dr.Fone

It supports removing screen lock from mainstream models, such as Samsung, LG, Lenovo, Xiaomi, etc. For some older version Samsung models, you can remove the lock without data loss. It will erase data after unlocking for other models.

Dr.Fone - Android Lock Screen Removal

Remove Android Screen Lock In One Click

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• No tech knowledge asked. Everybody can handle it.
• It will complete the unlocking process in minutes.

3,981,454 people have downloaded it

How to use Dr.Fone to unlock

Step 1: Install Dr.Fone toolkit and select Screen Unlock > Android > Unlock Android Screen.

Now connect your Android phone connected with the PC, and select the Xiaomi Redmi A2+ device brand from the list.

Step 2: Follow the on-screen instructions to put your Android device into the specific mode. Once the download is complete, Dr.Fone will start the unlocking process.

Step 3: After the process is complete, your Android device should be unlocked, and you can access it without the screen lock.

Conclusion

We know that losing or forgetting your Android lock code can be a real pain, and so these solutions are sure to put the smile back on your face and get you using your phone again as usual. As you can see, the Dr.Fone - Screen Unlock (Android) is a simple and reliable way to unlock your Android phone, but you can always try the Google option if you assess that it better suits your needs. No matter which solution you choose, your locked Android phone will be up and running again in no time at all.

Also read: