How to Unlock Honor 90 GT Phone Password Without Factory Reset?

You always set up some sort of lock to secure your smartphone to stop others from checking your phone data, messages, or pictures. More importantly, it is needed to deny admission to your valuable phone data in case it gets stolen. However, many times you come across this situation where your Android phones are stuck as you cannot unlock the password. Either your children have been playing with the lock patterns, and the screen gets locked due to entering the wrong password many times, or you have unexpectedly forgotten your password. Or somebody else has reset your password, or you have broken your mobile screen, and you cannot enter your password. Many similar situations may arise.

You are in the middle of some things, and you want to make some urgent calls. How to unlock Android phone passwords without a factory reset? What do you do then? There are very easy solutions to this that would help unlock your Android phone in no time without going for the factory reset and losing your valuable data.

Part 1: How to unlock Android password without factory reset using Dr.Fone - Screen Unlock?

Whether you have a pattern or PIN or fingerprint as a password, you can remove any type of password by using the Dr.Fone - Screen Unlock. The only defect is that your data will be wiped out after unlocking the phone successfully. It helps in removing the lock screen on Android phones. Now, if you are thinking about how safe it is, let me assure you that the process is very safe and simple, with no risk of data leakage. This process is supported by most Samsung and LG smartphones without data loss, and you just need to connect your handset to let the Dr.Fone - Screen Unlock start the procedure.

safe & secure

Dr.Fone - Screen Unlock (Android)

Get into Locked Android Phones without Factory Reset

• 4 screen lock types are available: pattern, PIN, password, fingerprints, face ID, etc.
• Support 20,000+ mainstream models of Android phones & tablets.
• Save you from ending up with a locked phone after too many wrong attempts.
• Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

Follow the following steps to unlock your Android password without factory reset using Dr.Fone.

Step 1: Firstly, install and run Download Dr.Fone –Screen Unlock on your computer. And connect your Android phone to your computer with a USB cable > download.

Step 2: After that, select the phone model from the list or choose “I can’t find my device model from the list above” on the next screen.

Step 3: Now, there will be three steps mentioned that you must follow to get your phone into the Download mode. The first is to power off the phone. The second is to press and hold the Volume button along with the Home button and Power button. The third step is to press the volume up the option to get into the download mode.

Step 4: Once your phone is in download mode, the program will start downloading the recovery package and then unlock your Android password without factory reset or data loss.

Step 5: You will see that the icon showing “Remove Password Completed” will pop up. This whole process takes only a few minutes to get your work done without any loss of any data.

Part 2: How to unlock Android password without factory reset using Android Device Manager?

With very simple steps and a few minutes at hand, you can get rid of your password using Android Device Manager (ADM). This tool will unlock your password without going for a factory reset and losing data. The main feature of the Android device manager will run through the Google account. The installation of a Google account is very important to run out the Android device manager. The Android device will respond immediately once if the phone is switched on. The connectivity of the internet is a must to find the map on the Honor 90 GT device. How to unlock Android phone passwords without factory reset? May it be quite interesting to use device manager visuals? The steps are mentioned below:

Step 1. Your Android phone is always linked to your Google account. So first and foremost, on your computer or on another mobile phone, open the site <www.google.com/Android/devicemanager> .

• Now sign in with your Google credentials. Google will start searching for your device. Here you need to choose the Android phone you want to unlock in case it is already not selected.

Step 2. Here you will see three options: “Ring,” “Lock,” and “Erase.” Select the “Lock” option

Step 3. A window will appear where you need to type any temporary password. Do not enter your Google password, and you need not enter the recovery message. Click on “Lock ” again.

Once successful, you will get a confirmation message below the three buttons: Ring, Lock, and the Erase option.

Step 4. On your locked phone, you will see a field asking for your password. Here you can enter your temporary password. Doing so will unlock your device.

Step 5. Now in your unlocked phone, go to Settings and then to Security. Now click on disable to remove the temporary password, and later you change it with a new one.

You have successfully unlocked your device.

Part 3: Unlock Android password using custom recovery and Pattern Password Disable (SD card needed)?

The third way to unlock an Android phone password without a factory reset it using the “custom recovery” technique. To work out this process, you would have to install the custom recovery process. Also, your phone needs to have an SD card. It will be required to send the zip file to the phone since your device is locked. This technique requires access to the Android System folder and rooting your device if not already rooted.

Custom recovery is a usual mechanism in all smartphones. It predicts the troubleshooting techniques and how to process the main configuration with all sequences. Quite interesting, isn’t it?

Follow the following steps to complete and unlock the Android password without a factory reset.

• Step 1. First of all, download a zip file by the name “Pattern Password Disable” to the computer system and then transfer it to your SD card.
• Step 2. Then you would need to insert the SD card into your locked phone and then restart the Honor 90 GT device in recovery mode.
• Step 3. Next, move on to flash on the zip files to the card and restart. After that, your phone will boot and open up without the locked screen.

Note: Sometimes, the Honor 90 GT device may ask for a pattern or password. You just need to put in any random pattern/password then it will get unlocked.

Through this easy method, you can now access your Android phone without using a factory reset and losing your valuable data.

The problem of getting your mobile locked and not being able to open it is a common problem on Android phones these days. Many of us tend to panic when such problems arise. However, now that we have given some easy solutions and methods to unlock Android phone passwords without factory reset and losing any data, things would be much easier. Thus, you will solve your problems in no time.

How to Reset a Honor 90 GT Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Honor 90 GT phone that is locked, or how to get into a locked Honor 90 GT phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Honor 90 GT Phone that is locked?

Before you go to reset your locked Honor 90 GT phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Honor 90 GT phone typically involves performing a factory reset. The process erases all data and settings on the Honor 90 GT device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Honor 90 GT , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Honor 90 GT Phone That is Locked With Google Find My Device?

Resetting a locked Honor 90 GT phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Honor 90 GT phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Honor 90 GT phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Honor 90 GT phone that is locked without a password?

In order to reset your Honor 90 GT phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Honor 90 GT phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Honor 90 GT Phone That Is Locked Without a Password!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Work for forgotten passwords, second-hand Honor 90 GT devices, etc.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Honor 90 GT phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Honor 90 GT .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Honor 90 GT device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Honor 90 GT Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Honor 90 GT phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Honor 90 GT phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Honor 90 GT Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Honor 90 GT device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Honor 90 GT phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Honor 90 GT phone with Gmail ID and password

It is imperative to understand that unlocking your Honor 90 GT Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Honor 90 GT phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Honor 90 GT device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Honor 90 GT. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Honor 90 GT phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Honor 90 GT phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

Unlocking the Power of Smart Lock: A Beginner’s Guide for Honor 90 GT Users

Google constantly comes up with features to simplify the way users interact and complete tasks on the Android platform. One of the most important features that techies loved to debate about was the Smart Lock Android, a secure password manager functioning in sync with a Google account on the Android phone.

Part 1: What is Android Smart Lock?

Android Lollipop added a feature called Smart Lock, and the feature was devised as a smart tool to prevent the Android phone from locking once it was initially unlocked. In other words, the feature overrides an Android phone’s Lock Screen feature, thereby saving users the need to enter passwords every time the Honor 90 GT device locks.

If you’re at home, it’s likely your android phone is locked out if you haven’t accessed at for some time. Smart Locks solves the problem in many ways. It allows you to allocate trusted places. Once you within range of the trusted places, your phone won’t lock. Trusted devices come next. Smart Lock is assigned to Bluetooth and Android NFC unlock devices.

Finally, trusted face unlocking is the ultimate face recognition system that unlocks your Android device as soon as you look at it across the front-facing camera. A face unlock first introduced with Android Jelly Bean and has been significantly improved in later versions.

Turning On Smart Lock

The feature is enabled by first accessing settings. For example, in a Samsung Galaxy S6:

Tap on Settings, which is the gear symbol.

• • Click on Personal and tap on Security.
• • Go to Advanced and tap on Trust agents and make sure Smart Lock is turned on.

• • Under Screen Security tap Smart Lock.
• • Here, you need to enter your Screen Lock. If you haven’t done so, set up a password and PIN by following the on-screen prompts. The screen Lock is needed every time you have to change the Smart Lock settings.

Within Smart Lock, there are three options for setting the system. You can set up trusted devices, trusted face, and trusted places individually, combining two or all three at the same time. You can choose just one trusted face, but you have the option to set up as many trusted devices and trusted places as needed.

Part 2: Turn On Smart Lock For Android with Trusted Devices

You can decide on a trusted device to be paired with Smart Lock Android.

For example, you can set up a Smart Lock for Bluetooth in your Android Bluetooth settings. It can also be done for Android NFC unlock devices. Examples include the Bluetooth system in your car, NFC unlocks, android sticker on the car’s phone dock, or Bluetooth in your watch.

• • Go to Settings.
• • Tap on Security and then Smart Lock.
• • Existing paired options are listed under Trusted Devices.
• • Initially, trusted devices will show None.

Tap on Add Trusted Devices.

The next screen is the Choose Device Type.

Since you have already paired Bluetooth, it will ask you to choose the Honor 90 GT device from the list.

• • As an example, let’s take the case of LG HBS800. It may show Not connected until you add it.
• • It will show up under Trusted devices in the Smart Lock menu.
• • When you turn the added device on, Smart Lock now unlocks the Android mobile.

Similarly, other Bluetooth and NFC unlock android supported gadgets can be added under the list of Trusted Devices.

Part 3: Turn On Smart Lock For Android With Trusted Locations

You can also add locations or addresses to Smart Lock Trusted Locations, and the phone unlocks automatically as soon as you arrive at the desired location. For example, you can set up your home or work address under Trusted Locations.

Check current settings first.

On a new Android phone, visit Settings>Personal.

Then Lock Screen and Security.

Then Secure Lock Settings.

Tap Smart Lock.

Tap on Trusted Places.

Tap on Add Trusted Places

• • Initiate the Google Maps app on the Android phone. Make sure the Internet and GPS are on.
• • Pick a place.

• • Click on Settings.
• • Click on Edit home or work. You can now add or edit the required addresses.
• • As an example, click on the Enter work address.
• • You now have the option to type in the address or use the address listed on Google Maps as the required work address.

• • A successful addition is listed and can be edited under the Edit work address.
• • Close the Google Maps app.
• • The work address is automatically propagated and configured with Smart Lock settings.
• • Go back to Settings> Security> Smart Lock> Trusted Places.
• • The work address you added is now listed under Work.

• • However, it is not yet configured as a Smart Lock option. Tap the location once, and it is enabled.
• • The switch along the address to the right turns blue, indicating it is enabled.
• • The work address is now listed under Trusted places for Work.

• • The phone is now configured for the work address and will unlock whenever you are at the location.
• • Since it works on Google Maps, the feature works through an Internet connection.

Part 4: Turn On Smart Lock For Android With Trusted Face

The feature recognizes your face and then unlocks the Honor 90 GT device. Once you set up the Honor 90 GT device to recognize your face as a trusted face, it will unlock the Honor 90 GT device as soon as it recognizes you.

PRECAUTION:  At best, this can be the first level of security, as one who resembles you to some extent can unlock the Honor 90 GT device. Photographs are not stored in the system. The device does hold necessary data to recognize your face, and the security level is determined by how good the Honor 90 GT device is configured. The data is not accessed by any app or loaded onto a Google server for backup.

Setting Up Trusted Face

• • Go to Smart Lock and tap Trusted Face.
• • Tap on Setup. Follow on-screen instructions.

The device begins to gather data about your face. The trusted face icon appears. As a backup, in case Smart Lock does not recognize your face, use the manual system by applying the PIN or password to unlock the Honor 90 GT device.

In case Trusted Face is not required, tap on reset Trusted Face appearing under the Trusted Face menu. Tap on Reset to reset the option.

How To Improve Facial Recognition In Your Bluetooth and Android NFC Unlock Devices

• • If you feel facial recognition is not up to the mark, go to Smart Lock and tap on a Trusted face.
• • Tap on Improve face matching.
• • Tap on Next and follow instructions on the screen to complete the task.

Smart Lock Android is a great feature and is only going to improve on time. With added security measures being introduced by Google for Bluetooth and NFC unlock android devices, including configuration to Google maps and Gmail, the feature may be one of the most important features to overcome constant blocking of devices even in protected places.

Video on How to Remove Android Lock Screen Without Data Loss

Also read: