How to Unlock Honor 90 Pro Phone Password Without Factory Reset?

You always set up some sort of lock to secure your smartphone to stop others from checking your phone data, messages, or pictures. More importantly, it is needed to deny admission to your valuable phone data in case it gets stolen. However, many times you come across this situation where your Android phones are stuck as you cannot unlock the password. Either your children have been playing with the lock patterns, and the screen gets locked due to entering the wrong password many times, or you have unexpectedly forgotten your password. Or somebody else has reset your password, or you have broken your mobile screen, and you cannot enter your password. Many similar situations may arise.

You are in the middle of some things, and you want to make some urgent calls. How to unlock Android phone passwords without a factory reset? What do you do then? There are very easy solutions to this that would help unlock your Android phone in no time without going for the factory reset and losing your valuable data.

Part 1: How to unlock Android password without factory reset using Dr.Fone - Screen Unlock?

Whether you have a pattern or PIN or fingerprint as a password, you can remove any type of password by using the Dr.Fone - Screen Unlock. The only defect is that your data will be wiped out after unlocking the phone successfully. It helps in removing the lock screen on Android phones. Now, if you are thinking about how safe it is, let me assure you that the process is very safe and simple, with no risk of data leakage. This process is supported by most Samsung and LG smartphones without data loss, and you just need to connect your handset to let the Dr.Fone - Screen Unlock start the procedure.

safe & secure

Dr.Fone - Screen Unlock (Android)

Get into Locked Android Phones without Factory Reset

• 4 screen lock types are available: pattern, PIN, password, fingerprints, face ID, etc.
• Support 20,000+ mainstream models of Android phones & tablets.
• Save you from ending up with a locked phone after too many wrong attempts.
• Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

Follow the following steps to unlock your Android password without factory reset using Dr.Fone.

Step 1: Firstly, install and run Download Dr.Fone –Screen Unlock on your computer. And connect your Android phone to your computer with a USB cable > download.

Step 2: After that, select the phone model from the list or choose “I can’t find my device model from the list above” on the next screen.

Step 3: Now, there will be three steps mentioned that you must follow to get your phone into the Download mode. The first is to power off the phone. The second is to press and hold the Volume button along with the Home button and Power button. The third step is to press the volume up the option to get into the download mode.

Step 4: Once your phone is in download mode, the program will start downloading the recovery package and then unlock your Android password without factory reset or data loss.

Step 5: You will see that the icon showing “Remove Password Completed” will pop up. This whole process takes only a few minutes to get your work done without any loss of any data.

Part 2: How to unlock Android password without factory reset using Android Device Manager?

With very simple steps and a few minutes at hand, you can get rid of your password using Android Device Manager (ADM). This tool will unlock your password without going for a factory reset and losing data. The main feature of the Android device manager will run through the Google account. The installation of a Google account is very important to run out the Android device manager. The Android device will respond immediately once if the phone is switched on. The connectivity of the internet is a must to find the map on the Honor 90 Pro device. How to unlock Android phone passwords without factory reset? May it be quite interesting to use device manager visuals? The steps are mentioned below:

Step 1. Your Android phone is always linked to your Google account. So first and foremost, on your computer or on another mobile phone, open the site <www.google.com/Android/devicemanager> .

• Now sign in with your Google credentials. Google will start searching for your device. Here you need to choose the Android phone you want to unlock in case it is already not selected.

Step 2. Here you will see three options: “Ring,” “Lock,” and “Erase.” Select the “Lock” option

Step 3. A window will appear where you need to type any temporary password. Do not enter your Google password, and you need not enter the recovery message. Click on “Lock ” again.

Once successful, you will get a confirmation message below the three buttons: Ring, Lock, and the Erase option.

Step 4. On your locked phone, you will see a field asking for your password. Here you can enter your temporary password. Doing so will unlock your device.

Step 5. Now in your unlocked phone, go to Settings and then to Security. Now click on disable to remove the temporary password, and later you change it with a new one.

You have successfully unlocked your device.

Part 3: Unlock Android password using custom recovery and Pattern Password Disable (SD card needed)?

The third way to unlock an Android phone password without a factory reset it using the “custom recovery” technique. To work out this process, you would have to install the custom recovery process. Also, your phone needs to have an SD card. It will be required to send the zip file to the phone since your device is locked. This technique requires access to the Android System folder and rooting your device if not already rooted.

Custom recovery is a usual mechanism in all smartphones. It predicts the troubleshooting techniques and how to process the main configuration with all sequences. Quite interesting, isn’t it?

Follow the following steps to complete and unlock the Android password without a factory reset.

• Step 1. First of all, download a zip file by the name “Pattern Password Disable” to the computer system and then transfer it to your SD card.
• Step 2. Then you would need to insert the SD card into your locked phone and then restart the Honor 90 Pro device in recovery mode.
• Step 3. Next, move on to flash on the zip files to the card and restart. After that, your phone will boot and open up without the locked screen.

Note: Sometimes, the Honor 90 Pro device may ask for a pattern or password. You just need to put in any random pattern/password then it will get unlocked.

Through this easy method, you can now access your Android phone without using a factory reset and losing your valuable data.

The problem of getting your mobile locked and not being able to open it is a common problem on Android phones these days. Many of us tend to panic when such problems arise. However, now that we have given some easy solutions and methods to unlock Android phone passwords without factory reset and losing any data, things would be much easier. Thus, you will solve your problems in no time.

Top 12 Prominent Honor 90 Pro Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Honor 90 Pro can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Bypass the FRP lock of Samsung without a PIN or Google account.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Honor 90 Pro fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

• Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

• Step 2: Selecting Google As the Honor 90 Pro device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Honor 90 Pro device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

• Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Honor 90 Pro device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Honor 90 Pro device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Honor 90 Pro device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Honor 90 Pro fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Honor 90 Pro device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Honor 90 Pro device to minimize accidental contact with the sensor area.

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Honor 90 Pro device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Honor 90 Pro fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

• Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

• Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Honor 90 Pro device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Honor 90 Pro device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

• Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

• Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

In summary, this article detailed various methods to fix the Honor 90 Pro fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Honor 90 Pro .

How To Remove Screen Lock PIN On Honor 90 Pro Like A Pro: 5 Easy Ways

When protecting personal information on your phone, setting up a lock screen is essential. If you’ve ever forgotten your screen lock PIN on Android, you know how frustrating it can be to get back into your device. If you’ve ever tried to remove the screen lock PIN on an Android device, you know it’s not that easy.

It depends on your phone and the type of lock code you have set up. Note that this will erase all your data from the phone, so be sure to back it up first. This post will teach you how to remove the screen lock PIN on Android devices using several methods. So if you cannot use your device, keep reading for the steps!

Part 1: How To Remove Screen Lock PIN On Honor 90 Pro? 5 Simple Ways

If you’ve forgotten your screen lock pin, there’s no need to worry. Here are quick and easy ways to remove the screen lock PIN on your Android device.

1. Change or Remove in Settings

When you go to Settings > Lock Screen > Screen lock type, several lock screen options are available. These options are given below:

Swipe:

You can unlock your phone by swiping in any direction on its screen.

Pattern:

You will draw a pattern on a 3-by-3 grid of dots to unlock your phone this way. To do this, you’ll need to use your finger to connect the dots in the pattern.

Phone Pin:

When you choose a PIN, make sure it’s something easy to remember. But choose wisely- a PIN that’s too easy to guess can put your account at risk.

Password:

It is the highest level of security available for your phone. Passwords should contain seven characters, of which at least one must be a letter. They should also be both unique and memorable.

Face recognition:

By holding your face directly in front of the phone screen, you can unlock your phone and verify yourself in apps.

Fingerprints:

Touch your phone to open it quickly and easily.

Iris:

Verify that only the contents of your phone are visible to your eyes.

Intelligent Scan:

Unlock your device with both facial and iris recognition.

If you’ve forgotten your lock PIN on your Android device, don’t worry - there are a few ways to reset it. Here’s how:

Step 1: Select Lock Screen > Screen lock type from the Settings menu.

Step 2: When prompted, enter your current lock screen code.

Step 3: Select None from the list.

2. Disable Android Device Manager

It is not possible to remove the PIN from some Android devices. The Android device administrator can be disabled in this situation. Here’s how to universal unlock a PIN for Android:

Step 1: From the “Settings” option, select the “Security” option and click on it to begin.

Step 2: Select “Device Administrators” from the menu, and you will see a list of apps that may restrict your ability to change the settings.

Step 3: Choose the Android device manager from the list.

Step 4: Click on “Disable.”

3. Remove PIN from Google Find My Device

Even if you don’t remember your Android lock PIN, you can use Find My Device to eliminate your Android lock PIN. Sign in to Google Play, turn on Find My Device and Location, and connect your locked phone to the internet.

Here’s the guide to universal unlock PIN for Android:

Step 1: Log into your Google account on your computer and visit Google Find My Device.

Step 2: Tap the “ERASE DEVICE” icon on your device and enter your account information again.

Step 3: To remove Android phone settings and data, click the “Erase” icon. Once that is done, you will erase the phone PIN.

4. Factory Reset Your Honor 90 Pro (Data Loss)

A factory reset in Recovery mode can also be used to remove the forgotten phone PIN lock on an Android device. It is important to note that you will lose everything on your device if you universal unlock your PIN for android.

Steps to get rid of forgotten phone PIN via factory reset:

Step 1: Turn off your Android phone by pressing and holding the Power button.

Step 2: To enter Recovery mode, press and hold the Volume Down + Power buttons simultaneously. Hold the buttons until the Start menu appears.

Step 3: After selecting Recovery mode with the Volume Down button, press the Power button to confirm.

Step 4: Select Wipe data/factory reset using the Volume buttons. Press Yes to confirm the operation.

Step 5: Once your device has been factory reset, you need to restart it by selecting the Reboot system now option.

Part 2: Is There Any Universal Unlock PIN For Android?

Dr.Fone - Screen Unlock (Android)

Remove the Screen Lock Pin Without Any Hassle!

• Completely unlinked from the previous Google account, it won’t be traced or blocked by it anymore.
• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Almost all Samsung phones and tablets are supported (Currently for Android 6-12).
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

While there is no “universal unlock pin” for Android devices, Dr.Fone - Screen Unlock can bypass the lock screen on many popular phone models, including Samsung, LG, Motorola, Sony, HTC, Huawei, and more. Its simple interface makes it easy to use, even for those who are not tech-savvy.

Step 1: Select “Screen Unlock” from all the tools in Dr.Fone.

Step 2. Select Unlock Android Screen

We provide 2 options for you, and to unlock screen, you should select “Unlock Android Screen”.

Step 3. Select device model

There are still 2 buttons to choose, “100% Remove Screen Lock” is for most Android brands, but please back your device up before you pick it.

Check the brands’ list and make sure your unlock process keeps.

Step 4. Enter into Recovery Mode

With examples of Samsung phones, it’ll be clearer to understand how to unlock your Android phone via Recovery Mode.

Note: The specific processes are various according to different brands.

Recovery Mode in Samsung phone with Bixby

Recovery Mode in Samsung phone without Bixby

Recovery Mode in Samsung phone with Home Button

Step 5. Instructions to Wipe Cache Partition

Steps in Recovery Mode are really important. Find the correct options and your locked screen will be removed.

Now it’s a phone everyone can access without a password or pattern.

Part 3: In What Cases Should We Remove PIN On Our Android Phone?

There are a few reasons why you might want to remove the phone PIN from your Android:

1. Failed Attempts

If you’ve tried to unlock your phone with a pin too many times and failed, your phone will become locked. In this case, you’ll need to remove the PIN to unlock it.

2. Buy a Used Android phone

When you buy a second-hand Android phone, it’s best to remove the previous owner’s pin for security reasons. You can enter the phone’s settings and remove the PIN under the security section.

The Bottom Line

It can be frustrating when you forget your screen lock pin. You’re stuck staring at your phone, unable to use it or access any of your important data. But don’t worry; there are a few ways you can try to remove the screen lock pin on your Android device.

Luckily, Wondershare Dr.Fone - Screen Unlock is a powerful and easy-to-use lock screen removal tool that can help you bypass your lock screen in just a few minutes. Plus, it’s compatible with a wide range of Android devices, so you can use it regardless of what type of phone you have.

Also read: