How to Unlock Itel P55+ Phone Password Without Factory Reset?

You always set up some sort of lock to secure your smartphone to stop others from checking your phone data, messages, or pictures. More importantly, it is needed to deny admission to your valuable phone data in case it gets stolen. However, many times you come across this situation where your Android phones are stuck as you cannot unlock the password. Either your children have been playing with the lock patterns, and the screen gets locked due to entering the wrong password many times, or you have unexpectedly forgotten your password. Or somebody else has reset your password, or you have broken your mobile screen, and you cannot enter your password. Many similar situations may arise.

You are in the middle of some things, and you want to make some urgent calls. How to unlock Android phone passwords without a factory reset? What do you do then? There are very easy solutions to this that would help unlock your Android phone in no time without going for the factory reset and losing your valuable data.

Part 1: How to unlock Android password without factory reset using Dr.Fone - Screen Unlock?

Whether you have a pattern or PIN or fingerprint as a password, you can remove any type of password by using the Dr.Fone - Screen Unlock. The only defect is that your data will be wiped out after unlocking the phone successfully. It helps in removing the lock screen on Android phones. Now, if you are thinking about how safe it is, let me assure you that the process is very safe and simple, with no risk of data leakage. This process is supported by most Samsung and LG smartphones without data loss, and you just need to connect your handset to let the Dr.Fone - Screen Unlock start the procedure.

safe & secure

Dr.Fone - Screen Unlock (Android)

Get into Locked Android Phones without Factory Reset

• 4 screen lock types are available: pattern, PIN, password, fingerprints, face ID, etc.
• Support 20,000+ mainstream models of Android phones & tablets.
• Save you from ending up with a locked phone after too many wrong attempts.
• Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

Follow the following steps to unlock your Android password without factory reset using Dr.Fone.

Step 1: Firstly, install and run Download Dr.Fone –Screen Unlock on your computer. And connect your Android phone to your computer with a USB cable > download.

Step 2: After that, select the phone model from the list or choose “I can’t find my device model from the list above” on the next screen.

Step 3: Now, there will be three steps mentioned that you must follow to get your phone into the Download mode. The first is to power off the phone. The second is to press and hold the Volume button along with the Home button and Power button. The third step is to press the volume up the option to get into the download mode.

Step 4: Once your phone is in download mode, the program will start downloading the recovery package and then unlock your Android password without factory reset or data loss.

Step 5: You will see that the icon showing “Remove Password Completed” will pop up. This whole process takes only a few minutes to get your work done without any loss of any data.

Part 2: How to unlock Android password without factory reset using Android Device Manager?

With very simple steps and a few minutes at hand, you can get rid of your password using Android Device Manager (ADM). This tool will unlock your password without going for a factory reset and losing data. The main feature of the Android device manager will run through the Google account. The installation of a Google account is very important to run out the Android device manager. The Android device will respond immediately once if the phone is switched on. The connectivity of the internet is a must to find the map on the Itel P55+ device. How to unlock Android phone passwords without factory reset? May it be quite interesting to use device manager visuals? The steps are mentioned below:

Step 1. Your Android phone is always linked to your Google account. So first and foremost, on your computer or on another mobile phone, open the site <www.google.com/Android/devicemanager> .

• Now sign in with your Google credentials. Google will start searching for your device. Here you need to choose the Android phone you want to unlock in case it is already not selected.

Step 2. Here you will see three options: “Ring,” “Lock,” and “Erase.” Select the “Lock” option

Step 3. A window will appear where you need to type any temporary password. Do not enter your Google password, and you need not enter the recovery message. Click on “Lock ” again.

Once successful, you will get a confirmation message below the three buttons: Ring, Lock, and the Erase option.

Step 4. On your locked phone, you will see a field asking for your password. Here you can enter your temporary password. Doing so will unlock your device.

Step 5. Now in your unlocked phone, go to Settings and then to Security. Now click on disable to remove the temporary password, and later you change it with a new one.

You have successfully unlocked your device.

Part 3: Unlock Android password using custom recovery and Pattern Password Disable (SD card needed)?

The third way to unlock an Android phone password without a factory reset it using the “custom recovery” technique. To work out this process, you would have to install the custom recovery process. Also, your phone needs to have an SD card. It will be required to send the zip file to the phone since your device is locked. This technique requires access to the Android System folder and rooting your device if not already rooted.

Custom recovery is a usual mechanism in all smartphones. It predicts the troubleshooting techniques and how to process the main configuration with all sequences. Quite interesting, isn’t it?

Follow the following steps to complete and unlock the Android password without a factory reset.

• Step 1. First of all, download a zip file by the name “Pattern Password Disable” to the computer system and then transfer it to your SD card.
• Step 2. Then you would need to insert the SD card into your locked phone and then restart the Itel P55+ device in recovery mode.
• Step 3. Next, move on to flash on the zip files to the card and restart. After that, your phone will boot and open up without the locked screen.

Note: Sometimes, the Itel P55+ device may ask for a pattern or password. You just need to put in any random pattern/password then it will get unlocked.

Through this easy method, you can now access your Android phone without using a factory reset and losing your valuable data.

The problem of getting your mobile locked and not being able to open it is a common problem on Android phones these days. Many of us tend to panic when such problems arise. However, now that we have given some easy solutions and methods to unlock Android phone passwords without factory reset and losing any data, things would be much easier. Thus, you will solve your problems in no time.

6 Solutions to Unlock Itel Phones If You Forgot Password, PIN, Pattern

Too many times, we forget the passcode of our smartphones, only to regret it later. Don’t worry if you are facing the same issue. It happens to all of us at times. Fortunately, there are many ways to unlock an Android device even when you have forgotten its password/pin/pattern lock. This guide will teach you how to unlock Itel phones if you forgot the password in five different ways. Read on and choose your preferred option if you forgot the password on your Itel phone and move past every setback you face.

Solution 1: Unlock Itel Phone using Dr.Fone - Screen Unlock (5 mins solution)

Among all the solutions we are going to introduce in this article, this is the easiest one. Dr.Fone - Screen Unlock (Android) can help you remove the lock screen of some Itel and Samsung devices without any data loss. After the lock screen is removed, the phone will work like it’s never been locked before, and all your data are there. Besides, you can use this tool to bypass the passcode on other Android phones, such as Huawei, Lenovo, Oneplus, etc. The only defect of Dr.Fone is that it will erase all the data beyond Samsung and Itel after unlocking.

Dr.Fone - Screen Unlock (Android)

Get into the Locked Itel Phone within Minutes

• Available for most Itel series, like LG/LG2/LG3/G4, etc.
• Except for Itel phones, it unlocks 20,000+ models of Android phones & tablets.
• Everybody can handle it without any technical background.
• Offer customized removal solutions to promise good success rate.

4,008,669 people have downloaded it

How to unlock an Itel phone with Dr.Fone - Screen Unlock (Android)?

Step 1. Launch Dr.Fone.

Download Dr.Fone from the download buttons above. Install and launch it on your computer. Then select the “Screen Unlock“ function.

Step 2. Connect your phone.

Connect your Itel phone to the computer using a USB cable. Click on Unlock Android Screen on Dr.Fone.

Step 3. Select the phone model.

Currently, Dr.Fone supports removing lock screens on some Itel and Samsung devices without data loss. Select the correct phone model information from the dropdown list.

Step 4. Boot the phone in download mode.

• Disconnect your Itel phone and power it off.
• Press the Power Up button. While you are holding the Power Up button, plug in the USB cable.
• Keep pressing the Power Up button until the Download Mode appears.

Step 5. Remove the lock screen.

After your phone boot in download mode, click on Remove to start to remove the lock screen. This process only takes a few minutes. Then your phone will restart in normal mode without any lock screen.

For more detailed steps, please go to our guide on unlocking Android phones with/without data loss .

Solution 2: Unlock the Itel Phone Using Android Device Manager (Need a Google account)

This is probably the most convenient solution to set up a new lock for your Itel device. With Android Device Manager, you can locate your device, ring it, erase its data, and even change its lock remotely. All you got to do is log in to the Itel P55+ device Manager account using the credentials of your Google Account. Needless to say, your Itel phone should be linked to your Google Account. Learn how to unlock the Itel phone if forgot your password using Android Device Manager.

• Step 1. Start by logging in to Android Device Manager by entering the credentials of your respective Google Account that is configured with your phone.

• Step 2. Select your device’s icon to get access to various features like ring, lock, erase, and more. Out of all the provided options, click on “lock” to change the security lock of your device.

• Step 3. Now, a new pop-up window will open. Here, provide the new password for your device, confirm it, and click on the “lock” button again to save these changes.

That’s it! Your phone will reset its password, and you would be able to move past any problem related to forgetting the password on the Itel phone using Android Device Manager unlock .

Solution 3: Unlock the Itel Phone Using Google Login (only Android 4.4 and below)

If your Itel device runs on Android 4.4 and previous versions, then you can easily move past the password/pattern lock without any trouble. The provision is not available on devices, which run on newer versions of Android. Nevertheless, for all the Itel P55+ devices running on older versions than Android 4.4, this is undoubtedly the easiest way to set a new passcode. Follow these steps to learn how to unlock your Itel phone if you forgot your password using your Google credentials.

• Step 1. Try bypassing the pattern lock at least 5 times. After all the failed attempts, you will get the option to either make an emergency call or choose the option of “Forget pattern”.

• Step 2. Select the “Forget pattern” option and provide the correct credentials of your Google account to unlock your phone.

Solution 4: Unlock the Itel Phone Using Custom Recovery (SD card needed)

If your phone has a removable SD card, you can also try this technique to disable the pattern/password on your device. Though, you need to have some custom recovery installed on your device for this method. You can always go for TWRP (Team Win Recovery Project) and flash it on your device.

TWRP: https://twrp.me/

Also, since you can’t move anything to your device when it is locked, you need to do the same using its SD card. After ensuring that you have met all the basic prerequisites, follow these steps and learn how to unlock the Itel phone’s forgotten password using a custom recovery.

• Step 1. Download a Pattern Password Disable application and save its ZIP file on your computer. Now, insert your SD card into your system and move the recently downloaded file to it.

• Step 2. Reboot your phone into recovery mode. For instance, the TWRP recovery mode can be turned on by simultaneously pressing the Power, Home, and Volume Up button. You would get different options on your screen after entering the custom recovery mode. Tap on “Install” and browse the Pattern Password Disable application file.

• Step 3. Install the above-mentioned application and wait for a few minutes. Afterward, restart your Itel phone. Ideally, your phone will be restarted without any lock screen. If you get a lock screen, you can bypass it by entering any random digits.

Solution 5: Factory Reset Itel Phone in Recovery Mode (erases all phone data)

If none of the above-mentioned alternatives work, then you can also try to factory reset your device. This will erase every kind of data from your device and make it look brand new by resetting it. Though, you can easily resolve the forgot password on the Itel phone with it. Therefore, before proceeding, you need to be familiar with all the repercussions of performing a factory reset. All you got to do is follow these steps.

• Step 1. Put your Itel phone on its recovery mode with correct key combinations. To do this, firstly, turn your device off and let it rest for a few seconds. Now, press the Power and Volume Down key at the same time. Keep pressing them until you see LG’s logo on the screen. Release the buttons for a few seconds and press them again at the same time. Again, keep pressing the buttons until you see the recovery mode menu. This technique works with most Itel devices, but it can differ slightly from one model to another.

• Step 2. Choose “Wipe Data/Factory Reset.” You can use the Volume up and down key to navigate the options and the power/home key to select anything. Use these keys and select the “Wipe Data/Factory Reset” option. You might get another pop-up asking to delete all user data. Just agree it reset your device. Sit back and relax as your device will perform a hard reset.

• Step 3. Select the “Reboot system now” option to restart it. Your phone will be restarted without any lock screen.

After following these steps, you can easily overcome how to unlock the Itel phone forgot password issue.

Solution 6: Unlock Itel Phone Using ADB Command (need USB debugging enabled)

This might be a little complicated initially, but if you don’t want to follow either of the above-mentioned techniques to unlock your device, you can go with this alternative. Before proceeding, make sure that you have ADB (Android Debug Bridge) installed on your computer. If you don’t have it, then you can download Android SDK right here .

Additionally, it would help if you turned on the USB Debugging feature on your phone before you forgot the password. If USB debugging is not turned on before, then this method will not work for you.

After making your device ready and downloading all the essential software on your computer, follow these steps to learn how to unlock your Itel phone if you forgot the password.

• Step 1. Connect your device to the computer with a USB cable and open the command prompt when it is successfully connected. If you get a pop-up message regarding USB Debugging permission on your device, simply agree to it and continue.

• Step 2. Now, please provide the following code on the command prompt and reboot your device when it is processed. If you want, you can also tweak the code a little and provide a new lock pin.

• ADB shell

• cd /data/data/com.android.providers.settings/databases

• _sqlite3 settings._db

• update system set value=0 where name=’lock_pattern_autolock’;

• update system set value=0 where name=’lockscreen.lockedoutpermanently’;

• .quit

• Step 3. If the above code doesn’t work, try providing the code “ADB _shell rm /data/system/gesture. the key_” to it and follow the same drill.

• Step 4. After restarting your device, if you still get a lock screen, then give a random password to bypass it.

Conclusion

You can choose a preferred option and rectify the issue whenever you forgot the password on the Itel phone . Make sure that you meet all the requirements and go through the respective tutorial to attain fruitful results.

How to Unlock Itel P55+ Phone without Any Data Loss

In today’s digital age, our Android phones serve as the primary hub of our lives, holding a treasure trove of personal and professional data. Yet, the frustration of being locked out due to forgotten passwords or malfunctioning security features can be overwhelming, compounded by the fear of data loss during the recovery process. However, there’s a beacon of hope - a way to unlock your Android phone without any data loss. In this comprehensive guide, we will explore the latest techniques, tools, and methods to regain access to your Android device safely without a password, PIN, or fingerprint. Let’s dive into it now.

Part 1. How to Unlock Itel P55+ Phone with Dr.Fone - Screen Unlock (Android)

If you or someone accidentally forgot or mistyped/misentered your lock password and caused it to lock permanently, of course, you will find ways to unlock it at first. But if you are not connected to the internet, or did not register a Google account for your device, your last resort would be to factory reset your device. That will totally wipe everything you have and save it on your device. If you want to unlock your lock screen without having to worry that your device data will be erased, Dr.Fone - Screen Unlock (Android) is your phone unlocking software .

safe & secure

Note: This tool temporarily support unlocking part of Samsung and LG locked screen without losing data, but other Android phone will be wiped all data if you try to unlock the screen with Dr.Fone - Screen Unlock (Android).

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove 4 screen lock types - pattern, PIN, password & fingerprints.
• Only remove the lock screen. No data loss at all.
• No tech knowledge asked. Everybody can handle it.
• Work for Samsung Galaxy S/Note/Tab series and LG G2/G3/G4.

4,464,578 people have downloaded it

Steps on How to Unlock an Android Phone with Dr.Fone - Screen Unlock (Android)

Step 1. Connect your Android phone to your PC with Dr.Fone installed, then run the program.

Step 2. Then, you should see the “Screen Unlock” tool, so proceed into it. After that,  click “Android” > “Unlock Android Screen.”

Step 3. Then choose “Remove without Data loss” to unlock part Samsung/LG devices without data loss and find your device model.

Step 4. Follow the instructions on the program to get the Android phone into “Download Mode.”

• 1. Power off the phone.
• 2. Press and hold volume down + home button + power button at the same time.
• 3. Press the volume up to enter download mode.

Step 5. The loading process will take you a few minutes because it is going to verify first your device’s compatibility.

Step 6. Wait until everything is done. You should then see your device already has no lock screen.

That’s how to unlock an Android phone with just one click using Wondershare’s Dr.Fone. If your device is not Samsung or LG, you can use a more advanced mode to unlock your phone .

Part 2. How to Unlock Android Phone with Aroma File Manager (with Data Loss)/h2>

If you weren’t able to open your Wi-Fi or data connection or enable USB Debugging, this is the way for you to unlock your lock screen. This could be a bit complicated, but it should work.

Steps are provided below, and please follow the step-by-step guide carefully to avoid a boot loop or any other damage.

Step 1. Download Aroma File Manager on your PC. This is a tool that unlocks Android phones. Android users can use it for free.

Step 2. Go to your Downloads folders and copy the downloaded zip file.

Step 3. Plug into your PC a memory card that you can insert into your phone later. Then, go to your list of connected devices and select the memory card.

Step 4. Paste the copied Aroma zip file. Once copied, eject it from your PC, then insert it into your Android device.

Step 5. Enter Recovery Mode for your device. Each Android device has its own ways of entering recovery mode, so take a look at this link and find your device.

Step 6. When you are already in Android Recovery Mode, use your volume keys to navigate to ‘’apply update from external storage’’, then select the zip file you copied a while ago. It will be flashed on your device.

Step 7. After it, restart, and recovery mode will reopen as Aroma File Manager, so go to its settings and select ‘’Automount all devices on start’’, then restart. Back in Aroma File Manager, go to the directory data>system. Check if the ff. exist. If they do, delete them. Then restart again.

• gesture.key (pattern) / password.key (password)
• locksettings.db
• locksettings.db-shm
• locksettings.db-wal
• signature.key
• sparepassword.key

Now you have your device booted up, and your Android lock screen is still locked, just gesture in or enter anything. It will be unlocked. And that’s how to unlock an Android phone using your device.

Part 3. How to Unlock Android Phone Using Minimal ADB and Fastboot (with Data Loss)

If you weren’t able to connect to the Internet, but you, fortunately, enabled your USB Debugging option before your device was locked, the ARONSDB tool from the Android SDK package can help you unlock your Android phone.

Here is the step-by-step guide for you to follow

Step 1. Go to Minimal ADB and Fastboot download page.

Step 2. Download the tool’s latest version.

Step 3. Open the downloaded Minimal ADB and Fastbootzip file and install it.

Step 4. Make sure your device is connected, then go to the Minimal ADB and Fastboot installation directory.

This PC [Win 8& 10] or My computer [Windows 7 & below]> Local Disk (C:) [primary drive]> Program Files [for 32-bit] or Program Files (x86) [for 64-bit] > Minimal ADB and Fasboot.

Click here

Step 5. Inside the folder, hold the Shift key on your keyboard, then right-click your mouse. An additional “Open command window here” will appear so select that.

Step 6. ADB terminal will pop out. Now, the first is to type in ADB devices. This is to check if your device is recognized by ADB. If there is no device listed below, try to remove and reconnect your Itel P55+ and retype the command. If there are listed devices already, proceed.

Step 7. Finally, type in the following commands one by one. These commands will remove your lock screen.

• adb shell
• cd /data/data/com.android.providers.settings/databases
• sqlite3 settings.db
• update system set value=0 where
• name=’lock_pattern_autolock’;
• update system set value=0 where
• name=’lockscreen.lockedoutpermanently’;
• .quit

This would work if you have your USB debugging turned on before it was locked. That’s how to unlock Android using ADB.

Part 4: How to Unlock Phone via Find My Device (with Data Loss)

Google Find My Device is another handy way to unlock your locked Android device. However, it requires you to have your Google ID credentials and you have previously enabled Find My Device features. Moreover, it will erase all the data on your device. Use the following steps to unlock your Android phone via Find My Device:

Step 1: Open a web browser on a computer or another device and visit the Find My Device website. Now, sign in with the Google account that is linked to the locked Android device.

Step 2: After signing in, you will see a list of devices associated with your Google account on the left side of the screen. Select the locked Android device from the list and choose the “Erase Device” option from the menu on the left-hand side.

Step 3: You will now be asked to confirm your identity through a Google account password or using a pass-key. Afterward, follow the on-screen instructions to erase and unlock your Android device.

Part 5: How to Unlock Android Phone without Losing Data in Safe Mode

One way to unlock your Android phone without losing the data is by utilizing Safe Mode. This method works only if the screen lock you have been using is a third-party app. Since Safe Mode disables third-party apps, you can easily use it to uninstall the problematic app. Here is how to unlock an Android phone without losing data:

Step 1: On your Android device, press and hold “Power” and “Volume Down” keys together for 3 seconds. After the Power menu becomes visible, press and hold the “Power off” option.

Step 2: After a while, you will see the “Safe Mode” option on your screen with some basic instructions. Now, you can use the button to boot into Safe Mode and remove the screen lock application.

Part 6. How to Unlock Android Phone without Any Data Loss Using Google Account (Android 4.4 or lower)

If luckily, you left your Wi-Fi open and luckily connected to the internet, this is the easiest way to unlock your Android phone.

The step-by-step guide for you to refer

Step 1: Retry the incorrect password or pattern until the ‘’Forgotten Password/Pattern’’ appears below. Then select that.

Step 2: Check ‘’Enter your Google Account details’’ then tap next.

Step 3: Input your Google Account details, username, and password. You are done.

You will be given the option to input a new password or pattern right after you enter your Google account details. But if not, Google must have emailed you your temporary password or pattern that you will input to unlock your lock screen.