How to Unlock Tecno Spark 20 Phone Password Without Factory Reset?

You always set up some sort of lock to secure your smartphone to stop others from checking your phone data, messages, or pictures. More importantly, it is needed to deny admission to your valuable phone data in case it gets stolen. However, many times you come across this situation where your Android phones are stuck as you cannot unlock the password. Either your children have been playing with the lock patterns, and the screen gets locked due to entering the wrong password many times, or you have unexpectedly forgotten your password. Or somebody else has reset your password, or you have broken your mobile screen, and you cannot enter your password. Many similar situations may arise.

You are in the middle of some things, and you want to make some urgent calls. How to unlock Android phone passwords without a factory reset? What do you do then? There are very easy solutions to this that would help unlock your Android phone in no time without going for the factory reset and losing your valuable data.

Part 1: How to unlock Android password without factory reset using Dr.Fone - Screen Unlock?

Whether you have a pattern or PIN or fingerprint as a password, you can remove any type of password by using the Dr.Fone - Screen Unlock. The only defect is that your data will be wiped out after unlocking the phone successfully. It helps in removing the lock screen on Android phones. Now, if you are thinking about how safe it is, let me assure you that the process is very safe and simple, with no risk of data leakage. This process is supported by most Samsung and LG smartphones without data loss, and you just need to connect your handset to let the Dr.Fone - Screen Unlock start the procedure.

safe & secure

Dr.Fone - Screen Unlock (Android)

Get into Locked Android Phones without Factory Reset

• 4 screen lock types are available: pattern, PIN, password, fingerprints, face ID, etc.
• Support 20,000+ mainstream models of Android phones & tablets.
• Save you from ending up with a locked phone after too many wrong attempts.
• Provide specific removal solutions to promise good success rate.

4,008,669 people have downloaded it

Follow the following steps to unlock your Android password without factory reset using Dr.Fone.

Step 1: Firstly, install and run Download Dr.Fone –Screen Unlock on your computer. And connect your Android phone to your computer with a USB cable > download.

Step 2: After that, select the phone model from the list or choose “I can’t find my device model from the list above” on the next screen.

Step 3: Now, there will be three steps mentioned that you must follow to get your phone into the Download mode. The first is to power off the phone. The second is to press and hold the Volume button along with the Home button and Power button. The third step is to press the volume up the option to get into the download mode.

Step 4: Once your phone is in download mode, the program will start downloading the recovery package and then unlock your Android password without factory reset or data loss.

Step 5: You will see that the icon showing “Remove Password Completed” will pop up. This whole process takes only a few minutes to get your work done without any loss of any data.

Part 2: How to unlock Android password without factory reset using Android Device Manager?

With very simple steps and a few minutes at hand, you can get rid of your password using Android Device Manager (ADM). This tool will unlock your password without going for a factory reset and losing data. The main feature of the Android device manager will run through the Google account. The installation of a Google account is very important to run out the Android device manager. The Android device will respond immediately once if the phone is switched on. The connectivity of the internet is a must to find the map on the Tecno Spark 20 device. How to unlock Android phone passwords without factory reset? May it be quite interesting to use device manager visuals? The steps are mentioned below:

Step 1. Your Android phone is always linked to your Google account. So first and foremost, on your computer or on another mobile phone, open the site <www.google.com/Android/devicemanager> .

• Now sign in with your Google credentials. Google will start searching for your device. Here you need to choose the Android phone you want to unlock in case it is already not selected.

Step 2. Here you will see three options: “Ring,” “Lock,” and “Erase.” Select the “Lock” option

Step 3. A window will appear where you need to type any temporary password. Do not enter your Google password, and you need not enter the recovery message. Click on “Lock ” again.

Once successful, you will get a confirmation message below the three buttons: Ring, Lock, and the Erase option.

Step 4. On your locked phone, you will see a field asking for your password. Here you can enter your temporary password. Doing so will unlock your device.

Step 5. Now in your unlocked phone, go to Settings and then to Security. Now click on disable to remove the temporary password, and later you change it with a new one.

You have successfully unlocked your device.

Part 3: Unlock Android password using custom recovery and Pattern Password Disable (SD card needed)?

The third way to unlock an Android phone password without a factory reset it using the “custom recovery” technique. To work out this process, you would have to install the custom recovery process. Also, your phone needs to have an SD card. It will be required to send the zip file to the phone since your device is locked. This technique requires access to the Android System folder and rooting your device if not already rooted.

Custom recovery is a usual mechanism in all smartphones. It predicts the troubleshooting techniques and how to process the main configuration with all sequences. Quite interesting, isn’t it?

Follow the following steps to complete and unlock the Android password without a factory reset.

• Step 1. First of all, download a zip file by the name “Pattern Password Disable” to the computer system and then transfer it to your SD card.
• Step 2. Then you would need to insert the SD card into your locked phone and then restart the Tecno Spark 20 device in recovery mode.
• Step 3. Next, move on to flash on the zip files to the card and restart. After that, your phone will boot and open up without the locked screen.

Note: Sometimes, the Tecno Spark 20 device may ask for a pattern or password. You just need to put in any random pattern/password then it will get unlocked.

Through this easy method, you can now access your Android phone without using a factory reset and losing your valuable data.

The problem of getting your mobile locked and not being able to open it is a common problem on Android phones these days. Many of us tend to panic when such problems arise. However, now that we have given some easy solutions and methods to unlock Android phone passwords without factory reset and losing any data, things would be much easier. Thus, you will solve your problems in no time.

How to Unlock Tecno Spark 20 Bootloader Easily

Do you want to unleash the true power of your smart phone? Do you wish to have complete control over your smart phone? If yes, well, here is the answer; unlock bootloader. For people who are already into the tricks of hacking and rooting smart phones, might be aware of this. But still, there are exciting new developments. Bootloader is a code existing in all operating systems which usually comes pre-locked. So, it is important, if you wish to have a custom ROM installed on the Tecno Spark 20 device, or if you wish to have other controls like installing applications which are incompatible, to have the Tecno Spark 20 device bootloader unlocked. But going through with the process of unlocking bootloader and rooting the Tecno Spark 20 device will not help and rather might break the warranty of the Tecno Spark 20 device. This definitely calls for a diligent watch on how to unlock HTC bootloader. So, it is imperative as a user to know the process of HTC bootloader unlock. This article serves you with some ways you could follow to unleash the true power of your HTC device. Here’s how you can do it.

Part 1: Why We Want to Unlock HTC Bootloader

For people with HTC device, unlocking bootloader would mean complete authority over the smart phone and you have all the power to control the HTC device by all means. Since, bootloader usually comes pre-locked, unlocking the bootloader is the initial step if you would like to have a custom ROM installed in your device. There are various advantages of HTC unlock starting from gaining rights of control to installing latest custom ROMs in the phone and installing incompatible applications. Moreover, HTC unlock bootloader could boost the Tecno Spark 20 device speed and battery life and also help in making complete backups of the Tecno Spark 20 device. You could also have controls to remove bloatware from the HTC device. So, all in all, while there could be certain side effects, if not done properly, there are various advantages of unlocking HTC bootloader. If the process is carried out properly, the Android device could be the perfect smart phone you would like to have.

Part 2: How to Unlock Tecno Spark 20 Bootloader

Tecno Spark 20 is the flagship device of HTC by all means. With a world of features and offerings, Tecno Spark 20 truly is a beast. While the phone is very powerful without any modifications, the true potential is yet to be seen and that can only be done if the bootloader is unlocked. So, to have a complete control over the Tecno Spark 20 device, it is important to unlock the bootloader and the process has to be carried out diligently. One of the initial things that needs to be ensured is that the Tecno Spark 20 device is fully charged or atleast 80% mark. Make sure you have the fastboot drivers for the Tecno Spark 20 device configured on the windows machine and the Android SDK. Here are some of the steps which can be followed to unlock bootloader.

Step 1: It is always very important to keep the phone data backed up and more so when you are planning to unlock the bootloader.

As one of the initial measures, backup the Tecno Spark 20 device completely as bootloader unlocking process will wipe all the data off. So, backup all the data like photos, contacts, multimedia files, documents, etc.

Step 2: Go to htcdev.com/bootloader. Ensure that you are registered with HTC and once the sign up is done, log in to HTC dev.

Now, ensure that HTC Sync Manager is installed on the PC.

Step 3: From the bootloader page, select your device using the drop down option as shown in the picture below.

After selecting the Tecno Spark 20 device, click on “Begin Unlock Bootloader”, and then confirm all the dialogue boxes which come your way on screen.

Step 4: Now, you will be presented with four steps to put the Tecno Spark 20 device in bootloader mode. Disconnect the Tecno Spark 20 device from the PC and turn the Tecno Spark 20 device off completely. Press the volume down button along with the power button to switch the Tecno Spark 20 device on in bootloader mode.

Step 5: Use the volume keys of the Tecno Spark 20 device to select Fastboot option along with pressing power button to confirm, after the Tecno Spark 20 device is in bootloader mode. Now, connect the Tecno Spark 20 device to the computer using a USB cable.

Step 6: Go to Fastboot folder on the PC and holding down the shift key, click on any empty space followed by a click on “Open command window here”.

Step 7: In the command prompt window, type “fastboot devices” and press enter. Tecno Spark 20 will show up in the command prompt.

Note: The drivers have to be installed correctly to see the Tecno Spark 20 device in the command prompt. So, if the Tecno Spark 20 device does not show up, reinstall HTC Sync Manager and try again after restarting the computer.

Step 8: On HTC Dev’s website third page, click on “proceed to Step 9”. Follow the steps listed and then click on submit. The unlock token code for the Tecno Spark 20 device will be mailed by HTC. Download the token and name it “Unlock_code.bin” and place the token in the fastboot folder.

Step 9: Now, in the command prompt window, type the following:

fastboot flash unlocktoken Unlock_code.bin

Step 10: On the Tecno Spark 20 , one message will appear asking if you want to unlock the Tecno Spark 20 device bootloader.

Use volume keys to select and power button to confirm. Once this is done, the Tecno Spark 20 device will restart once and it’s done. The device is now bootloader unlocked.

Unlock Your Tecno Spark 20 Phone with Ease: The 3 Best Lock Screen Removal Tools

Let’s just say that you recently changed your Tecno Spark 20 phone’s password, and now you are having trouble remembering it. After a few wrong attempts, you will get an alert message saying that more wrong attempts will block your device. In these situations, you can hard reset your device, but it will delete all your data and settings.

Instead of using other methods, you can use an Tecno Spark 20 password unlock tool to unlock your device without a password. You can find many unlock tools but if you want an easy-to-use and efficient Tecno Spark 20 unlock tool, try Dr.Fone - Screen Unlock. With Dr.Fone, you can unlock your Tecno Spark 20 device within five minutes. You don’t have to worry about harm to your phone’s software. Here, we will discuss the three best Tecno Spark 20 unlock tools and a complete guide on how to remove the Tecno Spark 20 screen lock with Dr.Fone.

Tool 1: Dr.Fone - Screen Unlock (Android)

For Tecno Spark 20 smartphone users who have forgotten their password and are locked out of their device, finding a reliable and efficient password unlock tool is crucial. One such tool that stands out is Dr.Fone - Screen Unlock (Android). Dr.Fone - Screen Unlock (Android) offers a fast and efficient solution to unlock your Tecno Spark 20 device. With its advanced algorithms and technology, it can bypass various lock screen types, including PIN, password, pattern, and fingerprint. You can regain access to your device within minutes, saving you from the frustration of being locked out of your phone for an extended period.

Dr.Fone - Screen Unlock is the first choice of many people because of the simple device unlock procedure. When you unlock your device with Dr.Fone, you don’t have to worry about damaging its software. Dr.Fone is the most efficient Tecno Spark 20 pattern lock remove tool because it can unlock all old and new Tecno Spark 20 devices. In addition to that, Dr.Fone also offers various other features like system repair, WhatsApp transfer, phone transfer, data backup and restore, data eraser, etc. Here is the guide to unlocking the Tecno Spark 20 lock screen with Dr.Fone.

With Dr.Fone, you can remove the lock screen of any Tecno Spark 20 mobile in four easy steps. Each step is easy to follow.

• Step 1. Download Wondershare Dr.Fone from our official website and install it on your PC.

• Step 2. Launch the Dr.Fone and navigate to the “Toolbox” > “Screen Unlock” > “Android” > “Unlock Android Screen”.

• Step 3. Click the “OPPO” icon and use a USB cable to connect your Tecno Spark 20 phone and your PC. Dr.Fone will start to unlock Android screen after getting into the specific mode. There are various phone brands for you to choose, don’t make it wrong, otherwise, all rest processes won’t work well.

• Step 4. Once the unlock progress is over, you can access your Tecno Spark 20 phone without any password or pattern.

Tool 2: Tecno Spark 20 Password Unlock

Tecno Spark 20 unlock tool is free software that enables users to unlock Tecno Spark 20 devices without a password. The Tecno Spark 20 password unlock tool can bypass screen lock, FRP, Google verification, DIAG, and ADB. It works for all Tecno Spark 20 smartphones. It is the best tool for those who forgot their phone’s screen lock password. With Tecno Spark 20 unlock tool, you don’t have to complete complex steps, and the method to unlock devices is simple. As an Tecno Spark 20 user, you should be aware of the fact that Tecno Spark 20 doesn’t allow password changes with a factory reset.

You can only reset your password using the Tecno Spark 20 password unlock tool after a factory reset. This tool is compatible with all versions of Windows. It is a one for all solution for many Tecno Spark 20 smartphone problems. You can use it to reset the hardware of your Tecno Spark 20 phone and delete all data and settings. It features a simple and easy-to-use user interface, and you can get it at no cost. Here are the steps to remove the Tecno Spark 20 lock screen with the Tecno Spark 20 password unlock the program.

• Step 1. Download and Install the Tecno Spark 20 unlock tool. Run the application and power off your smartphone. Select Tecno Spark 20 from the brand list and determine the chipset of your device. It can either be MTK or Qualcomm.
• Step 2. For the MTK(MediaTek) chipset, all you need to do is set your MAC address from the network adaptor options and start the unlock process.
• Step 3. For the Qualcomm chipset, select your device model and click on the “Service” tab to enable DIAG mode.
• Step 4. Start the Tecno Spark 20 device unlock process. Once the process is complete, your device will automatically boot up and format all data. There will be no screen lock or FRP lock.

Tool 3: iToolab - UnlockGo

If you have the habit of changing your Tecno Spark 20 smartphone frequently, then it is easy to forget your password. Changing your phone’s password is not a problem, but once you forget your phone’s password, things can get troublesome. Without your phone’s password, you might be able to call others, but you can’t unlock your device, use social media, or use any apps on your phone. Although it looks like a bug problem, you can easily deal with it using the proper tools. Instead of trying to unlock your locked Tecno Spark 20 device using various unsafe methods, you can use iToolab - UnlockGo to remove its screen lock.

iToolab - UnlockGo is a simple Tecno Spark 20 pattern remove tool that enables users to unlock privacy passwords and screen locks of their Tecno Spark 20 smartphones. The only reason not to use this tool for Tecno Spark 20 screen unlock is that you can lose all your data. Although lock screen removal without data loss is available in UnlockGo it only works for earlier Samsung devices. For Tecno Spark 20 users, forgetting their phone’s password means losing all their data to unlock their device. Here are the steps to unlock Tecno Spark 20 phones using iToolab - UnlockGo.

• Step 1. Install and launch iToolab - UnlockGo(Android) on your PC. Click on the “Unlock Screen lock” on the main interface.
• Step 2. Select your device brand from the drop-down list. In your case, select “OPPO” and click on the “Unlock” button.
• Step 3. If your device has a home button, press the home + volume up + power keys at the same time to enter recovery mode. If your device does not have the home button, press the volume down + power keys to enter recovery mode.
• Step 4. Once you enable the recovery mode, iToolab - UnlockGo will start the screen lock removal on your Tecno Spark 20 device. You will get a notification once the unlock ends. Reboot your device and enter it without a password.

Bonus Tips: Have you ever found yourself locked out of your Tecno Spark 20 phone due to the Google Factory Reset Protection (FRP) feature? If so, don’t worry, as there is a solution that can help you bypass this security measure. Easily bypass Google FRP on Tecno Spark 20 Phone with Dr.Fone - Screen Unlock (Android). It effortlessly resolves issues like lost Google accounts, forgotten PIN codes, and unlocking used phones. Supported brands include Samsung , Xiaomi, Redmi , Oppo , Realme , and Vivo .

FAQs: Is Dr.Fone - Screen Unlock Safe for Your Tecno Spark 20 Phone?

Dr.Fone - Screen Unlock is the safest and most efficient tool to unlock your Tecno Spark 20 device without a password. It only removes the lock screen and doesn’t affect your device’s security. One of the advantages of using Dr.Fone is that it saves your phone’s warranty. When you unlock Tecno Spark 20 phones with Dr.Fone, you don’t need your Google password or a factory reset. Dr.Fone also gives you the option to back up your data. You can also use it to repair software problems on your device, like screen stuck, volume problems, or device lag.

Dr.Fone - Screen Unlock (Android)

Unlock Your Tecno Spark 20 Phone Hassle-Free

• Remove 4 screen lock types: pattern, PIN, password & fingerprints.
• Bypass Android FRP lock without a PIN or Google account.
• Work for Samsung, Xiaomi, Realme, OPPO, etc.
• No tech knowledge required, Simple, click-through, process.

3,981,454 people have downloaded it

Conclusion

These are the three best tools to unlock your Tecno Spark 20 smartphone. Each of these tools can unlock your phone without a password. If we want to pick the best Tecno Spark 20 password unlock tool, Dr.Fone - Screen Unlock (Android) is better than the other two for various reasons. With Dr.Fone, you get a simple user interface and an easy-to-follow procedure to unlock your device. The tool guides you to complete every step, and you can unlock your Tecno Spark 20 smartphone within five minutes. And you also don’t have to worry about losing your phone’s warranty. Dr.Fone is a one-stop solution for Android problems.

Also read: