How to Unlock Tecno Spark 20 Phone Pattern Lock without Factory Reset

Have you been locked out of your Android device and can’t seem to recall its pattern? Do you wish to learn how to unlock an Android phone pattern lock without a factory reset to access someone else’s device? If your answer is “yes”, then you have come to the right place. Lots of readers these days ask us about a foolproof way to learn how to unlock an Android phone pattern lock without a factory reset. To help you, we have decided to come up with an in-depth guide on the same. Read on and learn in 4 different ways.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Part 1: Unlock the Android Phone Pattern with Lock Screen Removal Tool

If you are locked out of the phone because forgot pattern lock, and fail to enter the phone after many times try with the word “phone has been locked”. No need to worry, there are many solutions to fix the issue. And Dr.Fone –Screen Unlock (Android) can be your first saver in the dilemma. It is a highly efficient pattern lock removal tool for over 2000+ mainstream android phones, like Samsung, Oneplus, Huawei, Xiaomi, Pixel, etc.

Except for pattern locks unlocking, it works for the PIN, fingerprints, Face ID, and Google FRP bypassing as well. It’s helpful even if you don’t know the OS version of your devices. So, now follow the below steps to unlock the pattern and regain access to your locked phone in minutes.

Dr.Fone - Screen Unlock (Android)

Get into Locked Phones within Minutes

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Easily remove the lock screen; No need to root your device.
• Everybody can handle it without any technical background.
• Provide specific removal solutions to promise good success rate

4,008,669 people have downloaded it

Step 1. Download Dr.Fone –Screen Unlock on your PC or Mac.

Step 2. Connect your Android phone to the computer using a USB cable. Next, click the “Unlock Android Screen“ from the interface.

Step 3. Choose the model version according to your android phone. For people who don’t know the operating system version, tick the circle “I can’t find my device model from the list above”.

Step 4. Enter and download the recovery package as the instructions show on the PC or Mac.

Step 5. It will be finished when the recovery package downloading is completed. Then, click “Remove Now“.

Once the whole progress is over, you can access your Android device without entering any password and view all your data on the Tecno Spark 20 device with no limits.

safe & secure

Part 2: How to unlock the Android phone pattern lock without resetting using a Google account?

If you have an older Android device, then you can simply move past its lock by taking the assistance of your Google account. All you need is access to the same Google account that is linked to your device. Though, this technique will only work on devices running on Android 4.4 and earlier versions. To learn how to remove pattern lock on Android without a factory reset, follow these steps:

Step 1. Simply provide any pattern on the Tecno Spark 20 device. Since the pattern would be wrong, you will get the following prompt.

Step 2. Tap on the “Forgot Pattern” option located at the bottom of the screen.

Step 3. This will provide different ways to access your phone. Select the Google Account details and tap on the “Next” option.

Step 4. Sign in using the credentials of the Google account that is linked to your device.

Step 5. Great! Now you can simply provide (and confirm) the new pattern for your device.

After following these instructions, you would be able to learn how to unlock an Android phone pattern lock without factory reset or causing any harm to your device.

Part 3: How to unlock Android phone password without factory reset - Android Device Manager

The Android Device Manager, which is now known as “Find My Device” is one of the best ways to locate your Android device remotely. Besides that, you can also use the interface to ring your device or change its lock from anywhere. All you need to do is access its interface from any other device and log-in with your Google credentials. You can follow these steps to learn how to unlock the Android pattern lock without factory reset.

Step 1. Log in to Android Device Manager (Find My Device) using your Google credentials.

Android Device Manager website: https://www.google.com/android/find .

Step 2. From the interface, you can select the Android device that is linked to your Google account.

Step 3. You will get options to ring it, lock it, or erase it. Select the “Lock” option to proceed.

Step 4. This will launch a new pop-up window. From here, you can provide a new lock screen password, confirm it, and also set an optional recovery message or phone number (in case your device has been lost).

Step 5. Confirm your choice and save it to remotely change the lock screen password on your device.

In the end, you would be able to learn how to unlock an Android phone pattern lock without a factory reset after following these above-mentioned steps.

Part 4: How to unlock Android phone pattern lock without factory reset using ADB?

By using Android Debug Bridge (ADB), you can also learn how to unlock the Android pattern lock without a factory reset. Though, this is a more time-consuming and complicated process than other alternatives like Dr.Fone. Nevertheless, you can learn how to remove pattern lock on Android without factory reset using ADB with these instructions:

Step 1. To start with, you need to download ADB on your system. This can be done by visiting the Android Developer’s website https://developer.android.com/studio/command-line/adb.html .

Step 2. Afterward, launch the installer and download all the essential packages on your system.

Step 3. Now, connect your phone to the system. Make sure that its USB debugging feature is on.

Step 4. To do this, go to Settings > About Phone and tap the “Build Number” option seven consecutive times. This will enable the Developer Options on your device.

Step 5. Go to Settings > Developer Options and turn on the feature of USB debugging.

Step 6. After connecting your device to the system, launch the command prompt in the installation directory on your respective ADB.

Step 7. Type the command “ADB shell rm /data/system/gesture.key” and press enter.

Step 8. Simply restart your device and access it the usual way, without any lock screen pattern or pin.

Conclusion

Now when you know how to unlock the Android phone pattern lock without a factory reset, you can easily access your device in a trouble-free way. Out of all the provided options, Dr.Fone - Screen Unlock (Android) is the best alternative. It provides a fast, secure, and reliable way to unlock your device without causing any harm or removing its content. Go ahead and give it a try and share these solutions with your friends and family as well.

How To Unlock Tecno Spark 20 Phone Without Password?

Has your Android smartphone been locked, and are you having trouble unlocking it now because you have forgotten phone password? Looking for methods to remove the password from your Android phone without doing a factory reset?

If the answer is “YES,” you’ve come to the correct spot.

Many people, including you, have had similar issues and wish to know how to unlock an Android phone without a password.

As a result, we have created some of the greatest guidelines or, you might say, top ways that may assist you in unlocking Android phones today, simply for you and countless other Android users.

Part 1: Unlock Your Locked Screen Without Password By 6 Efficient Ways

1. By your Google account

You can use your Google Account to unlock the Android phone password if, after several tries, you are still unable to do so without doing a factory reset.

You need to log into the Google account that is associated with the Tecno Spark 20 device, then do the following:

• The unlock pattern may only be used five times before a notification telling you to try again in 30 seconds appears.
• “Forgot pattern” will show up at the bottom of the screen.

• You must enter the Gmail account that is associated with the Tecno Spark 20 device here before selecting “Next.”

• That’s it; from this point forward, you may enter any new PIN or pattern that you can recall to unlock your smartphone.

2. Google Find My Device

Using your Google account is a superb method for finding the Tecno Spark 20 device when lost or stolen.

In addition, it may be used to lock or ring your smartphone. You may have noticed that there are three options available when using this feature: “Ring,” “Lock,” and “Erase.”

To bypass the Android lock screen, all you need to do is sign into the Tecno Spark 20 device’s associated Google account and then follow these steps:

• On any Android device or a computer, go to <www.google.com/android/find> and sign in using your Google account. Choose the Android smartphone you wish to unlock after that.
• After choosing the Tecno Spark 20 device, select one of the three options, “lock,” from the list.
• There will be a new pop-up window that you can use to change the Tecno Spark 20 device password. Additionally, you can choose to add a phone number or recovery email.
• Confirm it immediately, then input the password you just established on your locked device.

Many Samsung customers have this issue, which prevents them from using their devices. Try using the “Find My Mobile” feature on your mobile if you wish to unlock it if you’re a Samsung user. It would be helpful if you had a Samsung or Android model account.

After that, use Find My Device to unlock your Android phone without losing any data by following the instructions below:

• Sign in with your Samsung account at findmymobile.samsung.com.
• Choose “Lock my screen” from the menu on the left, type a new PIN in the box given, and then click “LOCK.”

Your smartphone will be unlocked, and the password will be changed to the new one after a brief delay.

3. Use ADB (Android Debug Bridge)

Without a factory reset, Android phone passwords may also be unlocked using the Android Debug Bridge (ADB).

• You must first download ADB to your computer. Visit the Android developer’s website at https://developer.android.com/studio/command-line/adb.html to do this.
• Launch the installer after that to begin downloading crucial software for your machine.

• Here, you must use a USB cable to connect your Tecno Spark 20 to the computer
• This will activate the developer option on your smartphone if you navigate to Settings > About Phone > and choose the “Build Number” option seven times.
• After that, activate USB debugging by going to Settings > Developer Options.

• Launch the command prompt in the ADB installation directory after your device is connected to the system.
• Press enter after typing “ADB shell rm /data/system/gesture.key” into the command line.

• Finally, just restart your smartphone and use it as normal.

4. Hard reset (data loss)

Each brand has a unique method for hard resetting a locked Android device. The methods to factory reset locked Android devices from Samsung, LG, HTC, Sony, and Huawei are compiled here.

When your phone is locked, you may access the recovery menu of your phone using its physical keys and choose to hard reset the Tecno Spark 20 device. Here’s how to restore a locked phone to factory settings.

• Use the buttons to see the recovery menu.
• Press and hold the Volume Up and Side buttons simultaneously until you see the brand logo on the screen for Android devices without a Power/Bixby/Home button.
• Press and hold the Volume Up, Bixby, and Power buttons all at once if your smartphone has a Power button. Releasing them before a logo arises is advised.
• Use the Volume Down key to highlight Wipe data/factory reset when the Android system recovery option displays, then hit the Power/Bixby key to choose it.
• Allow a few seconds for the factory reset procedure to finish after selecting Yes, or Factory data reset. The phone will reboot once you pick the Reboot system. Now you may configure it as if it were a brand-new gadget.

5. Unlock from Forgot Pattern (android 4.4 or lower)

This is another choice that might assist you in unlocking your phone without a factory reset or password. You may have observed that when pattern lock was enabled on your device, a security PIN question was also prompted at that time.

Therefore, you have the choice to Backup PIN, which might assist you in unlocking your smartphone, if you are unable to unlock it. To do it, take the following actions:

• Click on Android pattern lock.
• You’ll see a notification telling you to try again in 30 seconds after failing many times.
• The “Backup PIN” option will be there; choose it.
• Put the backup PIN and OK here.
• At last, you may unlock your cellphone by entering the backup PIN.

6. Boot into safe mode

Here’s how you can boot into safe mode.

• Hit the power button on your phone.
• Press and hold the volume down button on your phone as the animation begins. Hold it down until the animation is finished and your phone enters safe mode.
• “Safe mode” will be shown at the bottom of your screen.
• Out of safe mode
• Switch off your phone.
• Press the Power button on your phone for around 30 seconds, or until the Tecno Spark 20 device restarts.
• You will see that after entering and booting into the safe mode, the lock option will not be visible.
• Then you will also see the option to turn off boot.
• You can get rid of the locked phone by proceeding with that option.

Part 2: Easy Tool To Unlock Android Phone Without Password

If you forget the lock code, you can simply unlock your Android phone using Dr.Fone - Screen Unlock.

Have you encountered the same situation? Do not fret. You may use Dr.Fone - Screen Unlock to unlock the screen lock on Android smartphones. It enables you to erase an Android phone’s password, PIN, pattern, and fingerprint.

Let’s learn how to safely remove the Android lock screen.

Step 1: Connect your phone

Open Dr.Fone on your PC, then select “Screen Unlock” from the list of tools.

The Dr.Fone functionality is still usable with the old UI of the Dr.Fone Mac version, but we will update it as soon as we can.

Connect your Android phone to the PC via a USB cable. then click the “Unlock Android Screen” button on the software.

Step 2. Choose a device model

Nearly all Android devices feature locked displays, including Android. Because the recovery kits for different phone models vary, it’s important to pick the correct device brand to unlock the lock. Every model of supporting hardware is included in the list.

Step 3. Switch to download mode

If you then adhere to the instructions on the software, the phone will enter Download Mode.

• Offset your phone.
• Hold down the Power, Home, and Volume Down keys all at once.
• Use the Volume Up button to start Download Mode.
• Remove the Android lock screen starting now..

Step 4. Download a package for recovery

The recovery package will begin downloading once you set your device in download mode. Wait only till it is completed.

Step 5: Unlock Android without erasing data

After the recovery package download is finished, click “Remove Now.” This operation won’t harm any data on your Android device.

When everything is done, you won’t need to enter a password to access your Android smartphone, allowing you to see all of your data without any limitations.

Bonus Tips: How To Keep Our Data Safe?

Dr.Fone - Phone Backup is an excellent solution to keeping data safe and secure and baking it up before resetting your device, even if you have forgotten your password. You may quickly and conveniently back up practically all forms of Android phone data with Dr.Fone - Phone Backup (Android). Additionally, you may examine and export only certain types of data.

Here’s how you can use Dr.Fone - Phone Backup to keep data safe.

Step 1: Connect your Android phone to your PC.

Open Dr.Fone on your PC, then select “Phone Backup” from the menu.

Next, join your Android phone to the computer with a USB cable. The phone must be in USB debugging mode, please. You will be prompted to approve USB Debugging in a pop-up window on the Android phone if your version of Android is higher. Press the OK button if you would.

Click Backup to start backing up the data on your Android device.

If you have previously used this programme to back up your device, you may review your backup history by clicking on “View backup history.”

Step 2: Choose which file types to backup.

Once the Android phone is connected, select the file types you want to backup. Dr. Fone has previously examined all the file types for you. After that, click Backup to start the backup process.

It will cost some time for the backup. Do not disconnect your Android phone from the computer, use it, or delete any data while making a backup.

When the backup is complete, you may click the View the backup button to see what’s in the backup file.

The Bottom Line

It would be best if you had been able to answer the question, “How to unlock an Android phone without password,” using the techniques we have demonstrated here. The most effective way for resetting an Android phone is Wondershare Dr.Fone - Screen Unlock for Android. You may quickly reset a locked Android phone without a password with only a few clicks.

Full Guide to Unlock Your Tecno Spark 20

Yesterday my kid was using YouTube on my Tecno Spark 20 to help solve an assignment. However, it wouldn’t take the Tecno Spark 20 pattern unlock when I tried opening the phone. Maybe the kid has accidentally changed the lock, but I don’t know what to do. Please help me.

This article is for you if you have been locked out of your Tecno phone. Many individuals fail to remember their password or change it accidentally. However, it is not a big deal now. We’ll talk about the best Tecno Spark 20 password unlock tool today.

There are multiple ways to unlock your locked Tecno device. All the solutions mentioned here are effective and work 99% of the time. However, we suggest you use Dr.Fone. Dr.Fone is expert software to answer all your Android needs. It is safe, secure, and free of data loss.

Part 1: 3 Easy Ways to Remove Your Tecno Spark 20 Lock

1. Google Find My Device

Google Find My Device is an inbuilt feature in Tecno phones to unlock your phone through Google accounts. You can utilize it to unlock the Tecno screen lock. However, you need to know that you will lose all your files on the Tecno phone after the Tecno Spark 20 password unlocks. Therefore, make sure to back up your data before proceeding with the following steps:

• Ensure your locked Tecno phone is connected to your Google account and WiFi/Data. Then open the Find My Device site on a PC, and sign in with your phone’s Google account.
• Kindly select your device, and tap the “Erase Device” option.
• Type your Google account credentials once more. Then, click the “Erase” symbol to begin the unlocking system. That will remove the pattern lock from your OPPO, and you can open it without effort.

2. Answer Security Questions

This method is for you if you have set security questions while making your Google ID. By addressing those questions, you can unlock the Tecno Spark 20 screen lock. In any case, this way is invalid on some old Android phones.

To unlock this way, you need to press the Forgot Password option. If you can’t see the “Forgot Pattern/Password button on your phone, follow these steps:

• Try unlocking your Tecno smartphone with some wrong patterns a few times. Then you will see the “Forgot Pattern” symbol on the screen and tap it.
• Select the “Answer question” option to get to your security questions. Then, at that point, answer each of them correctly.

• It will automatically unlock your device if you answer all questions accurately. Then, it will expect you to set another screen lock for your OPPO. Therefore, keep the new PIN to yourself.

3. Hard Reset

If you wouldn’t worry about losing your user data, you can attempt this unlock method for your Tecno Spark 20. You won’t require any account or applications. It requires you to have sufficient battery life. It is simple. So let’s see how it is done.

• Check whether the battery percentage is over half. Then power off your Tecno phone by holding the “Side/Power” key for around 10 seconds.
• Press and hold the “Volume Down” and “Side/Power” buttons till the Tecno logo appears on display. Then, at that point, your phone is in recovery mode.
• Utilize the volume keys to pick the “Wipe Data/Factory Reset” choice, and press the “Side/Power” button to select it. Then, at that point, pick “Yes” to go on. You can reboot your Tecno after the reset is finished, and the lock will be no more.

Click here

Part 2: The Efficient Tool for Your Tecno Spark 20 Unlock

Dr.Fone - Screen Unlock (Android) offers a wonderful tool that works to unlock Tecno devices rapidly. This lock screen remover tool can unlock your phone from every five locks: PIN, passcode, face lock, pattern, or fingerprint in only a couple of basic steps. It works with all the Tecno models hassle-free. So, download it right away for a safe unlocking experience. Here’s how you can use it:

Step 1. Start your hard reset from Dr.Fone

Make your Tecno Spark 20 phone connected to the PC through a USB cable. Then, at that point, click “Screen Unlock” > “Android” on the program.

Step 2. Select Unlock Android Screen

When you arrive at this page, please choose the button “Unlock Android Screen”.

Step 3. Select device brand

We’ll offer you a phone brands list, almost all Android devices are here, for example, Samsung, Huawei, OPPO, Vivo, Lenovo, LG, etc. Then Select Tecno to continue.

Step 4. Unlock your Tecno Spark 20 now

The following steps are the key to unlocking your Tecno device. Attention! The unlock process will also wipe your data!

Great! Now the unlocking progress is done, and you can use your phone without entering password.

Bonus Tips: The Importance of Backing Up Your Android Data Regularly

The data loss on your Android phone or tablet can be extremely unpleasant. Subsequently, it’s suggested that you back up your Android phone or tablet consistently. It will keep you from losing your data. As an expert application, Dr.Fone Backup and Restore (Android) can help back up a wide range of data and settings on Android. In the meantime, it lets you review and restore the backup documents to another phone. Here’s how:

• Open the Dr.Fone software on your computer, and connect your phone to the PC through a USB connector and click OK. Then select the “Back up device” option.

• Tap the Backup option to begin the process.

• The process will require some time.
• After it is done, you can see where the backup is stored by clicking on the “View BackupS” option.

Conclusion

All the best Tecno Spark 20 password unlock tools are displayed above. They are helpful, dependable and safe to use. However, if you need the easiest tools, you must pick the Android Screen Unlock program. In this case, the Dr.Fone - Screen Unlock (Android) can unlock your Tecno phone without any issue. Therefore, we strongly suggest you use Dr.Fone for backup and unlock your device.

Also read: