How to Unlock Xiaomi Redmi Note 12R Phone without Google Account?

Uh oh – you’ve forgotten your Android Unlock code, and you can’t get it online to unlock using Google. Nothing could be more frustrating than gazing at your phone, knowing that it is essentially a paperweight at this point. Unless you can get it unlocked, your phone is useless, and all of your important photos, text messages, and content are all locked out of your reach. While right now, nothing can do without a Google account. But you can try to reset your Google account first.

Part 1: How to Bypass Lock Screen on Android device with Google Account (Android Device Manager)

Even if you have a Google account, if your phone isn’t connected to the internet, you cannot access it to unlock your phone. If this sounds familiar, you can always try this method.

1. First, navigate to the Android Device Manager page. You will need to sign in with the Google account that you use to set up your phone.

Android Device Manager link: http://www.google.com/android/devicemanager

2. Once you have logged in, you will automatically be redirected to the Android Device Manager page. If this is your first time, click the “Accept” button.

3. A list of all of the Xiaomi Redmi Note 12R devices registered to this Android account will pop up. Select the Xiaomi Redmi Note 12R device in question from this list.

4. The Android Device Manager will then locate your device. Make sure it is turned on!

5. After it has been located, you will have a few options for what to do next. If you do not know your phone’s location, you can call it from this screen, but if you know where it is, click the ‘Enable Lock & Erase’ option.

6. A notification will pop up on your device; confirm it.

7. At this point, you will be asked to create a new lock screen password. Once you have chosen one, press “Lock.”

8. Now, simply enter the new passcode on your device, and voila! It will open, and you can get back to your daily routine.

Part 2: How to Reset Your Google Account on your Android Phone

If you have forgotten your Google Account password, it is still possible to unlock your account and access the information within. Here is how you can unlock your Google account on your Android phone.

1. On your browser, go to the Google home page and try to sign in. You will fail, but that is good! It will lead you to the next step.

2. Since you cannot sign in on the sign-in page, you can now select the ‘Help’ link.

3. Choose the “forgot password” option. You will be prompted to enter your email address to proceed.

4. Two options will then appear: the first is your phone number, and the other asks you for your backup email.

5. Enter either one of these options, and you will receive a verification code via email, SMS, or a telephone call from an operator. If you have chosen to enter your backup email, at this point, you will receive detailed instructions on how to access the ‘reset password’ page.

6. Once you have been redirected to the ‘reset password’ page, you can input your new login information.

7. Finally, you can unlock your Google account on your Android! Confirm this by clicking the “Change Password” button. Success!

Part 3. How to Remove Locked Screen on Android using Dr.Fone

It supports removing screen lock from mainstream models, such as Samsung, LG, Lenovo, Xiaomi, etc. For some older version Samsung models, you can remove the lock without data loss. It will erase data after unlocking for other models.

Dr.Fone - Android Lock Screen Removal

Remove Android Screen Lock In One Click

• Pattern, PIN, password, fingerprints & face screen lock can all be unlocked.
• Bypass Android FRP lock without a PIN or Google account.
• No tech knowledge asked. Everybody can handle it.
• It will complete the unlocking process in minutes.

3,981,454 people have downloaded it

How to use Dr.Fone to unlock

Step 1: Install Dr.Fone toolkit and select Screen Unlock > Android > Unlock Android Screen.

Now connect your Android phone connected with the PC, and select the Xiaomi Redmi Note 12R device brand from the list.

Step 2: Follow the on-screen instructions to put your Android device into the specific mode. Once the download is complete, Dr.Fone will start the unlocking process.

Step 3: After the process is complete, your Android device should be unlocked, and you can access it without the screen lock.

Conclusion

We know that losing or forgetting your Android lock code can be a real pain, and so these solutions are sure to put the smile back on your face and get you using your phone again as usual. As you can see, the Dr.Fone - Screen Unlock (Android) is a simple and reliable way to unlock your Android phone, but you can always try the Google option if you assess that it better suits your needs. No matter which solution you choose, your locked Android phone will be up and running again in no time at all.

How to Show Wi-Fi Password on Xiaomi Redmi Note 12R

Since the invention of Android OS in 2008 by Andy Rubin, our world has faced a dramatic change. Android seems to be controlling a considerably high portion of our life. We have bought many gadgets that use this amazing OS and most of which are phones. But how much can you do with your Android phone? Developers are always making it more interesting to use this interface.

Most of the time, we use Android phones, we get faced with the need to access the internet. The Wi-Fi capability of these Android gadgets makes it super easy for us to surf the web. Throughout using Wi-Fi, we connect to a number of them. This could be at school, a sub-way café, the gym, buses, hospitals, hotels, towns, and the list is endless. A password secures most of this. Needless to say, our brain is weak to store all these passwords for future use, especially if you would want to connect with a different gadget you have recently bought or even your laptop. In this article, we will introduce you to how to find wifi password on rooted and also unrooted Android devices.

Part 1: Show Wifi Password on Rooted Android Device

What is Rooting?

First of all, what does rooting mean? You have probably used a Windows computer or even Linux. For the case of Windows, when installing a new program or software, it always prompts a dialog box saying, “Administrator permission required to run this program.” If you don’t have the administrator permission, you won’t install the program. In Android, this is called rooting. In simple terms, it means having the root permission to your phone. Some Android apps will require you the root permission, e.g., flashing your ROM. In this part, we will explain how you can show the Wi-Fi password on your Android with root.

To find the Wi-Fi passwords on your Android phone, you need to have an app to explore files which also supports a root user. In this case, ES FileExplorer or Root Explorer will come in handy. However, it turns out that the latter is offered at $3. Let’s use the free ES File Explorer.

Steps of getting Wi-Fi password on Android with root

In only four steps, we, at this moment, learn how we can find the password of a Wi-Fi on an Android phone.

Step 1: Install the ES File Explorer

Download the ES File Explorer from your play store, install it, and open it.

Step 2: Enable Root Explorer

The root explorer needs to be enabled so that you can reach the root folders of the Wi-Fi passwords you need. By default, the root feature in this ES explorer is not enabled. To enable it, just tap on the list menu on the top left corner.:

This will drop down a list of controls. Scroll down and find the Root Explorer option and enable it.

Step 3: Get the passwords’ file.

Go back to ES file explorer, and this time, find the folder named data.

When this folder opens, find another one named misc. Open it and find another one named wifi. Here, find a file named wpa_supplicant.conf.

Step 4: Retrieve the wifi password on Android

Make sure that you don’t edit anything in the file. You might mess up with important data and fail to access the Wi-Fi(s) in the future.

As you can see above, we have found the Wi-Fi passwords on the android device. On each network profile, we have the name of the network represented by name (ssid=”{the name}”), the network’s password represented by psk, the network’s access point represented by key_mgmt=WPA-PSK and its priority represented by priority.

Part 2: Show Wifi Password on Android without Root

What if I don’t have root access to my Android, can I still see Android Wi-Fi password? The short answer is yes. However, this is a bit involving but simple. You don’t need to be a computer guru to do it, but you need to have a computer and some internet access of course. The key thing is to find a way through which we can fetch the password file from the phone without using a root access protocol in the Android. This is made possible by some little programming insight using the Windows Command prompt.

Steps to show Wi-Fi password on Android without root

Step 1: Access the Developer authority

To access the files that Android uses to run passwords, you must first become a developer. This is very simple.

Get your Android phone and go to settings. Scroll down and find “About phone.” Tap on it and scroll down again to find Build number.

Tap on this “build number” 5 to 6 times until a message pops up, saying, “You are now a developer”.

Step 2: Enable the debugging.

Go back to Settings. Scroll down for developer options. Turn on the button for “Android/USB debugging”.

Step 3: Install ADB drivers.

Now, open your Windows desktop. Download and install ADB drivers. (Use this download link adbdriver.com ). You need to download and install platform tools (minimal ADB and fastboot) from http://forum.xda-developers.com/... Now open the folder where you’ve installed the above tools. By default, it is in the Local disc C\windows\system32\platform_tools location. However, you might want to locate them by searching on the windows search engine. You have to hold the Shift key and right-click inside the folder to click on”Open Command Window Here.”

Step 4: Test the ADB

Here, we would like to test whether the ABD is working properly. To do this, connect your phone to the PC using a USB. In the command prompt, type adb services and then press enter. If it’s working properly, you should see a device on this list.

Step 5: Find the Android wifi password.

Now, it is time to type the given command in the command prompt and type: adb pull /data/misc/wifi/wpa_supplicant.conf c:/wpa_supplicant.conf. This will fetch the file from your phone to the local disc C drive of the PC.

Step 6: Get the wifi passwords.

Lastly, open the file with a notepad, and there you go.

Now you learned how to show the wifi password on your Android device.

6 Solutions to Unlock Xiaomi Phones If You Forgot Password, PIN, Pattern

Too many times, we forget the passcode of our smartphones, only to regret it later. Don’t worry if you are facing the same issue. It happens to all of us at times. Fortunately, there are many ways to unlock an Android device even when you have forgotten its password/pin/pattern lock. This guide will teach you how to unlock Xiaomi phones if you forgot the password in five different ways. Read on and choose your preferred option if you forgot the password on your Xiaomi phone and move past every setback you face.

Solution 1: Unlock Xiaomi Phone using Dr.Fone - Screen Unlock (5 mins solution)

Among all the solutions we are going to introduce in this article, this is the easiest one. Dr.Fone - Screen Unlock (Android) can help you remove the lock screen of some Xiaomi and Samsung devices without any data loss. After the lock screen is removed, the phone will work like it’s never been locked before, and all your data are there. Besides, you can use this tool to bypass the passcode on other Android phones, such as Huawei, Lenovo, Oneplus, etc. The only defect of Dr.Fone is that it will erase all the data beyond Samsung and Xiaomi after unlocking.

Dr.Fone - Screen Unlock (Android)

Get into the Locked Xiaomi Phone within Minutes

• Available for most Xiaomi series, like LG/LG2/LG3/G4, etc.
• Except for Xiaomi phones, it unlocks 20,000+ models of Android phones & tablets.
• Everybody can handle it without any technical background.
• Offer customized removal solutions to promise good success rate.

4,008,669 people have downloaded it

How to unlock an Xiaomi phone with Dr.Fone - Screen Unlock (Android)?

Step 1. Launch Dr.Fone.

Download Dr.Fone from the download buttons above. Install and launch it on your computer. Then select the “Screen Unlock“ function.

Step 2. Connect your phone.

Connect your Xiaomi phone to the computer using a USB cable. Click on Unlock Android Screen on Dr.Fone.

Step 3. Select the phone model.

Currently, Dr.Fone supports removing lock screens on some Xiaomi and Samsung devices without data loss. Select the correct phone model information from the dropdown list.

Step 4. Boot the phone in download mode.

• Disconnect your Xiaomi phone and power it off.
• Press the Power Up button. While you are holding the Power Up button, plug in the USB cable.
• Keep pressing the Power Up button until the Download Mode appears.

Step 5. Remove the lock screen.

After your phone boot in download mode, click on Remove to start to remove the lock screen. This process only takes a few minutes. Then your phone will restart in normal mode without any lock screen.

For more detailed steps, please go to our guide on unlocking Android phones with/without data loss .

Solution 2: Unlock the Xiaomi Phone Using Android Device Manager (Need a Google account)

This is probably the most convenient solution to set up a new lock for your Xiaomi device. With Android Device Manager, you can locate your device, ring it, erase its data, and even change its lock remotely. All you got to do is log in to the Xiaomi Redmi Note 12R device Manager account using the credentials of your Google Account. Needless to say, your Xiaomi phone should be linked to your Google Account. Learn how to unlock the Xiaomi phone if forgot your password using Android Device Manager.

• Step 1. Start by logging in to Android Device Manager by entering the credentials of your respective Google Account that is configured with your phone.

• Step 2. Select your device’s icon to get access to various features like ring, lock, erase, and more. Out of all the provided options, click on “lock” to change the security lock of your device.

• Step 3. Now, a new pop-up window will open. Here, provide the new password for your device, confirm it, and click on the “lock” button again to save these changes.

That’s it! Your phone will reset its password, and you would be able to move past any problem related to forgetting the password on the Xiaomi phone using Android Device Manager unlock .

Solution 3: Unlock the Xiaomi Phone Using Google Login (only Android 4.4 and below)

If your Xiaomi device runs on Android 4.4 and previous versions, then you can easily move past the password/pattern lock without any trouble. The provision is not available on devices, which run on newer versions of Android. Nevertheless, for all the Xiaomi Redmi Note 12R devices running on older versions than Android 4.4, this is undoubtedly the easiest way to set a new passcode. Follow these steps to learn how to unlock your Xiaomi phone if you forgot your password using your Google credentials.

• Step 1. Try bypassing the pattern lock at least 5 times. After all the failed attempts, you will get the option to either make an emergency call or choose the option of “Forget pattern”.

• Step 2. Select the “Forget pattern” option and provide the correct credentials of your Google account to unlock your phone.

Solution 4: Unlock the Xiaomi Phone Using Custom Recovery (SD card needed)

If your phone has a removable SD card, you can also try this technique to disable the pattern/password on your device. Though, you need to have some custom recovery installed on your device for this method. You can always go for TWRP (Team Win Recovery Project) and flash it on your device.

TWRP: https://twrp.me/

Also, since you can’t move anything to your device when it is locked, you need to do the same using its SD card. After ensuring that you have met all the basic prerequisites, follow these steps and learn how to unlock the Xiaomi phone’s forgotten password using a custom recovery.

• Step 1. Download a Pattern Password Disable application and save its ZIP file on your computer. Now, insert your SD card into your system and move the recently downloaded file to it.

• Step 2. Reboot your phone into recovery mode. For instance, the TWRP recovery mode can be turned on by simultaneously pressing the Power, Home, and Volume Up button. You would get different options on your screen after entering the custom recovery mode. Tap on “Install” and browse the Pattern Password Disable application file.

• Step 3. Install the above-mentioned application and wait for a few minutes. Afterward, restart your Xiaomi phone. Ideally, your phone will be restarted without any lock screen. If you get a lock screen, you can bypass it by entering any random digits.

Solution 5: Factory Reset Xiaomi Phone in Recovery Mode (erases all phone data)

If none of the above-mentioned alternatives work, then you can also try to factory reset your device. This will erase every kind of data from your device and make it look brand new by resetting it. Though, you can easily resolve the forgot password on the Xiaomi phone with it. Therefore, before proceeding, you need to be familiar with all the repercussions of performing a factory reset. All you got to do is follow these steps.

• Step 1. Put your Xiaomi phone on its recovery mode with correct key combinations. To do this, firstly, turn your device off and let it rest for a few seconds. Now, press the Power and Volume Down key at the same time. Keep pressing them until you see LG’s logo on the screen. Release the buttons for a few seconds and press them again at the same time. Again, keep pressing the buttons until you see the recovery mode menu. This technique works with most Xiaomi devices, but it can differ slightly from one model to another.

• Step 2. Choose “Wipe Data/Factory Reset.” You can use the Volume up and down key to navigate the options and the power/home key to select anything. Use these keys and select the “Wipe Data/Factory Reset” option. You might get another pop-up asking to delete all user data. Just agree it reset your device. Sit back and relax as your device will perform a hard reset.

• Step 3. Select the “Reboot system now” option to restart it. Your phone will be restarted without any lock screen.

After following these steps, you can easily overcome how to unlock the Xiaomi phone forgot password issue.

Solution 6: Unlock Xiaomi Phone Using ADB Command (need USB debugging enabled)

This might be a little complicated initially, but if you don’t want to follow either of the above-mentioned techniques to unlock your device, you can go with this alternative. Before proceeding, make sure that you have ADB (Android Debug Bridge) installed on your computer. If you don’t have it, then you can download Android SDK right here .

Additionally, it would help if you turned on the USB Debugging feature on your phone before you forgot the password. If USB debugging is not turned on before, then this method will not work for you.

After making your device ready and downloading all the essential software on your computer, follow these steps to learn how to unlock your Xiaomi phone if you forgot the password.

• Step 1. Connect your device to the computer with a USB cable and open the command prompt when it is successfully connected. If you get a pop-up message regarding USB Debugging permission on your device, simply agree to it and continue.

• Step 2. Now, please provide the following code on the command prompt and reboot your device when it is processed. If you want, you can also tweak the code a little and provide a new lock pin.

• ADB shell

• cd /data/data/com.android.providers.settings/databases

• _sqlite3 settings._db

• update system set value=0 where name=’lock_pattern_autolock’;

• update system set value=0 where name=’lockscreen.lockedoutpermanently’;

• .quit

• Step 3. If the above code doesn’t work, try providing the code “ADB _shell rm /data/system/gesture. the key_” to it and follow the same drill.

• Step 4. After restarting your device, if you still get a lock screen, then give a random password to bypass it.

Conclusion

You can choose a preferred option and rectify the issue whenever you forgot the password on the Xiaomi phone . Make sure that you meet all the requirements and go through the respective tutorial to attain fruitful results.