In 2024, The Ultimate Guide How to Bypass Swipe Screen to Unlock on Tecno Spark 10 5G Device

In 2024, The Ultimate Guide How to Bypass Swipe Screen to Unlock on Tecno Spark 10 5G Device

Marry Lv13

The Ultimate Guide: How to Bypass Swipe Screen to Unlock on Tecno Spark 10 5G Device

Nowadays, the security mode is enabled in almost all digital devices, which is the case with our smartphones. However, when we repeatedly change our password, we might be in a state of confusion to remember it. Such instances are highly schemed to lock our messages, galleries, emails, and other personal storage. Using the locking pattern enhances security, and thus, apart from the known user of the Tecno Spark 10 5G device, unknown people cannot access your Android phone. To overcome this critical situation, we have this article to help you unlock your Android devices by removing or bypassing the swipe lock Android screen. The solutions provided in this article are easily accessible to all users and are easy to operate.

So, if you have ever been stuck due to a lock code, go through the article to resolve the issue and swipe up to unlock a password that somehow gets forgotten.

Part 1: How to disable Swipe Screen to unlock when you can access the phone?

Some people do not pay much attention to their privacy and will not bother locking their Android devices. They would disable the swipe screen to unlock their devices. Thus, this section will talk about the basic solution to disabling the swipe up to unlock Android devices. Our main focus here is on a disabling method of swiping the screen when your Android device is accessible.

Let us look at the detailed steps below to remove the swipe screen to unlock the Android phone.

Step 1: To begin with, touch the gear icon (that is setting) on the main screen of your Android phone. The settings screen will display directly since it is a shortcut to get in. You will get a drop-down menu where you will see many options are available for your flexibility.

Step 2: Out of those, choose the “Security” tab to access your further.

Step 3: It will prompt the tab as “Screen security,” You will be listed with three choices, namely, Screen lock, Lock screen options, and Owner Information.

android phone screen security

Step 4: Select the option called “Screen lock,” The next step is to enter your PIN code for security purposes. This step is carried out in Android phones to ensure you are the original owner of the Android device.

confirm the screen password

Step 5: If you click the PIN code option again, the drop-down menu will be listed with more options. Now select the option “None.”

disable swipe screen

That’s all. You have successfully run out of the disable commands for the swipe up to unlock the screen. You can now open and access your device without any security methods.

Part 2:How to remove/bypass Swipe to unlock when the phone is locked?

To unlock your device, the only solution is to follow the Dr.Fone - Screen Unlock (Android) . If you are looking to unlock the screen when the phone is locked, then this method solidly proves to bypass swipe lock Android when it is locked. It helps to resolve this issue by bypassing or removing the swipe screen without causing any loss to your data. This tool temporarily supports bypassing Android screens without data loss on Samsung and LG. As for other Android phones, all the data will disappear after unlocking with this tool.

The features of this Dr.Fone software are many. It gives a solution to four lock methods: a pin, pattern, fingerprint, and password. It is user-friendly, and even a user with no technical information can also use it with no issue. This tool is only limited to remove the screen lock on Samsung and LG without losing data. Your data will still be wiped out on other Android phones after using this tool.

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

  • It can remove four-screen lock types - pattern, PIN, password & fingerprints.
  • Only remove the lock screen. No data loss at all.
  • No tech knowledge asked. Everybody can handle it.
  • Work for Samsung Galaxy S/Note/Tab series, and LG G2, G3, G4, etc.

4,008,669 people have downloaded it

Tips: This tool also supports unlocking other Android screens beyond Samsung and LG. However, it does not support saving all the data after unlocking, like Samsung and LG.

Step 1: Initialize the Dr.Fone on the computer, and there will be many options in front of you. In that, select the “Screen Unlock”.

Step 2: Now, to bypass swipe lock Android, using the USB cable, connect the Android device to your computer, and it will prompt the Unlock Android Screen option.

start to unlock Android swipe screen

Step 3: To enable the download mode on your Android device, shut down your phone>Simultaneously, press the volume down, Home button, and Power button >Press the Volume up button. Once your device is in download mode, the recovery kit will get downloaded.

boot in download mode

Step 4: You will see the result right in front of you as Dr.Fone - Screen Unlock, recovery will bypass swipe lock Android without hampering your data. Foremost, you can now access your device without swipe up to unlock the screen.

android phone unlocked

https://techidaily.com

Pretty simple, right? Dr.Fone - Screen Unlock to the rescue for the issue of swipe screen to unlock.

Part 3: How to turn off the swipe to unlock when the pattern is enabled?

In this section, we will cover how to turn off the swipe to unlock when the pattern lock of the Tecno Spark 10 5G device is enabled. Therefore, here we will go through the process of turning off the swipe to unlock the feature of your device. This structure is formed in some interval of locking the screen.

The steps below imply turning off of swiping screen instantly:

Step 1: At first, open the app “Setting” present on your Android device.

Step 2: There will be multiple interfaces. Now choose the option “Security.”

android phone security settings

https://techidaily.com

Step 3: To turn off the swipe screen, when the pattern is enabled then, choose “Screen lock” and then click on “NONE.”

select none

Step 4: If you have enabled your pattern choice already, it will again prompt you to enter the pattern. Once you entered the pattern, the swipe screen lock will disappear.

Step 5: The final step is to reboot your Android device to update the feature of turning off the swipe screen. Now you can open your device at any time without using the pattern lock feature.

Note: Regardless of any situation of forgetting the Android lock password, you can go for an email account set up for swiping into the Android devices.

Conclusion

Now, to sum up, we would say that in this article, we tried to bring out the best solutions for your Android device in such cases wherein you want to disable your screen security. The Dr.Fone - Screen Unlock is simply a proven mechanism that delivers what we need and that, too, without any data loss. We ensure that you can disable the swipe screen to unlock easily and effectively using the methods given above. Hence, you can access your phone by bypassing swipe lock Android even if you forget the screen lock code. So, don’t just wait, but bring out the solution for the swipe screen to unlock the Android device with Dr.Fone - Screen Unlock (Android) now.

https://techidaily.com

Forgot Pattern Lock? Here’s How You Can Unlock Tecno Spark 10 5G Pattern Lock Screen

Forgetting the pattern lock of a device and getting locked out of it is probably one of the most frustrating scenarios faced by Android users. Nevertheless, unlike popular operating systems, Android provides a seamless way to past the forgot pattern lock feature.

You can either try Google’s native solution or a third-party tool in case you have forgotten the pattern lock on your device and reset it. In no time, you will be able to access your device (or even someone else’s phone by following these techniques). To make things easier for you, we have provided three simple solutions to resolve forgotten patterns on Android devices.

Part 1: How to bypass forgot pattern lock using the ‘Forgot Pattern’ feature?

One of the easiest and fastest ways to fix the forgot pattern lock issue on a device is by using its inbuilt “Forgot Pattern” feature. If you are using an Android 4.4 or earlier version, then you can simply access this feature. Since users can hack an Android device just by knowing the Google credentials of the connected device, the solution was later discontinued (as it was considered a security vulnerability). Nevertheless, if your device hasn’t been updated and you are using an Android 4.4 or previous version, then you can bypass the forgot pattern lock by following these steps:

Step 1. Firstly, provide the wrong pattern to your device. It will let you know that you applied the incorrect pattern.

Step 2. On the same prompt, you can see an option of “Forgot pattern” on the bottom. Simply tap on it.

forgot pattern

Step 3. This will open a new screen, which can be used to bypass the forgotten pattern of Android. Select the option for entering the Google Account details and proceed.

Step 4. To reset the forgot pattern lock, you need to provide the correct Google credentials of the account already linked to the Tecno Spark 10 5G device.

enter google account

Step 5. After signing in to the interface, you will be asked to provide a new pattern lock for the Tecno Spark 10 5G device.

draw an unlock pattern

Step 6. Confirm your choice and set a new pattern lock on your device.

Part 2: How to get past forgot pattern lock using Dr.Fone - Screen Unlock (Android)?

One of the major drawbacks of the “Forgot pattern” feature is that it doesn’t work on new Android devices. Since most of the Tecno Spark 10 5G devices out there have been updated, the technique has been outdated. Therefore, you can simply take the assistance of Dr.Fone - Screen Unlock (Android) to bypass the forgot pattern lock on your device. Without causing any harm to your device or erasing its data, your device’s password or pattern would be removed.

It is a part of the Dr.Fone toolkit and is compatible with all the leading Android devices out there. It can be used to remove passwords, patterns, pins, and more. It has an easy-to-use interface and provides a simple click-through process to resolve the forgot pattern Android lock on your device. However, this tool merely retains all the data after unlocking Samsung and LG screens. Other Android locked screens can also be unlocked, and the only thing is that it will wipe all the data after unlocking.

Dr.Fone - Screen Unlock

Save You from Ending up with a Locked Phone After Too Many Pattern Attempts

  • It can remove 4 screen lock types - pattern, PIN, password & fingerprints.
  • Work for Samsung, LG, Huawei phones, Google Pixel, Xiaomi, Lenovo, etc.
  • Unlock 20,000+ models of Android phones & tablets.
  • Enable you to break your Android pattern lock without root.

4,008,669 people have downloaded it

Step 1. To start with, visit the official website of Dr.Fone - Screen Unlock (Android) and download it on your system. After installing it, launch the tool and select the option of “Screen Unlock” from the home screen.

lock screen removal

Step 2. To use its forgot pattern lock feature, you need to connect your Tecno Spark 10 5G to your system using a USB cable. Once your device has been detected automatically, just click on the “Android”> “Unlock Android Screen” button.

forgot pattern android - start to remove

Step 3. Select the correct phone brand. It is important to ensure phone brand correctness to prevent bricking.

forgot pattern lock - select model details

Step 4. Then, enter “confirm” in the box to tell the tool that you agree to proceed.

forgot pattern lock - confirm operation

Step 5. Now, in order to fix the forgot pattern Android issue, you need to put your device into the Download Mode. To do this, you need to ensure that your device is switched off. Once it is off, hold the Power, Home, and Volume Down buttons simultaneously. After a while, press the Volume Up button to put your device into Download Mode.

boot device in download mode

Step 6. After your device enters its Download Mode, it will automatically be detected by the interface. It will start downloading the needed recovery packages to resolve the issue. Sit back and relax, as it might take a while to download the recovery packages. Let the application process the essential operations, and don’t disconnect your Tecno Spark 10 5G until it is completed successfully.

unlock android pattern

Step 7. In the end, you will get a prompt like this on the screen, informing you that the password/pattern on the Tecno Spark 10 5G device has been removed.

unlock android pattern

That’s it! Now, you can disconnect the Tecno Spark 10 5G device safely and use it how you like.

https://techidaily.com

Part 3: How to bypass forgot pattern lock using Android Device Manager?

To make it easier for its users to locate, lock, or erase their devices remotely, Google has developed a dedicated feature of the Android Device Manager. It is also commonly known as “Find My Device” as it is mostly used to locate a lost (or stolen) device. Though you can use this feature to ring your device, lock it, unlock it, or erase it remotely. You can access it from anywhere by providing your Google credentials and resolving the forgot pattern Android problem.

All of this can be done by following these steps:

Step 1. Launch a web browser of any device and go to the Android Device Manager website by clicking right here: https://www.google.com/android/find .

Step 2. You need to provide your Google credentials to sign in. Remember, this should be the same Google account that is linked to your device.

Step 3. After signing in, select the target Android device.

Step 4. You will get the location of the Tecno Spark 10 5G device with several other options (lock, erase, and ring).

lock android phone

Step 5. Click on the “Lock” button to reset its password.

Step 6. It will open a new pop-up window. From here, you can provide the new password for your device.

Step 7. After confirming your password, you can also provide an optional recovery message and phone number (if your device has been lost or stolen).

enter new password

Step 8. Save your changes and sign out of your account from Android Device Manager.

This will automatically reset the old pattern on your device to the new password.

Part 4: How to bypass forgot Samsung pattern lock using Samsung Find My Mobile

Bypassing a forgotten Samsung pattern lock using the Samsung Find My Mobile service is a method specifically designed for Samsung devices. This method allows you to unlock your Samsung device without losing any data. It’s a convenient way to regain access to your device if you’ve forgotten the pattern lock.

However, it relies on having previously set up Samsung Find My Mobile and linked your device. Here is how to unlock your Samsung device with Samsung Find My Mobile:

Step 1: Access the Find My Mobile (SmartThings Find) website using either a computer or another mobile device. Sign in using the Samsung account details linked to the locked device.

login into samsung find my

Step 2: After successfully logging in, locate the locked Samsung device. Now, click on the “Unlock” feature. Upon choosing this option, a pop-up window will appear. It will prompt you to input your Samsung account password. Once you’ve entered your password, proceed to unlock the Tecno Spark 10 5G device by pressing “Next.”

use the unlock feature

Part 5: How to bypass forgot pattern lock using Safe Mode

If you have locked your device using a third-party app, there exists a simple solution. You can use the Safe Mode to remove the problematic app. Safe Mode is intended for troubleshooting and disabling third-party apps. Following are the steps you need to follow to use Safe Mode to unlock your Android device:

Step 1: Initiating Safe Mode requires a simultaneous three-second press of the “Volume Down” and “Power” keys. When the power menu becomes visible, proceed to long-press the “Power Off” icon.

Step 2: In a moment, you’ll see the option “Safe Mode” replacing the other “Power Off” menu options. Proceed to boot your device into Safe Mode and uninstall the troublesome application.

enable the safe mode

Part 6: How to bypass forgot pattern lock using Factory Reset

Bypassing a forgotten pattern lock on an Android device using a factory reset is a last resort. The reason is it will erase all data on your device, including apps, photos, and settings. However, it can be an effective way to regain access to your device when other methods have failed. Here’s how to do it:

Step 1: Turn off your Samsung device and connect it to your computer. Now press and hold “Volume Up” and “Power” keys for a while. Release the keys once the Tecno Spark 10 5G device enters Recovery Mode.

Step 2: In Recovery Mode, use the Volume keys to navigate to “Wipe data/factory reset” and select it with the “Power” key. Confirm the action on the next screen by selecting “Factory data reset.”

choose wipe data factory reset

Wrap it up

If you have also forgotten the pattern lock on your device, then you can simply remove or reset it by following these solutions. In this way, you won’t even lose your important data files or cause any harm to your device. Without facing any unwanted setbacks, you would be able to bypass forgot pattern Android using Dr. Fone - Screen Unlock . It provides a fast, reliable, and secure solution to remove the lock screen security of an Android device in an effortless way.

Top 12 Prominent Tecno Spark 10 5G Fingerprint Not Working Solutions

Part 1. Optimal Solution: Unlock With Wondershare Dr.Fone Directly

Facing a malfunctioning fingerprint on your Tecno Spark 10 5G can be frustrating. In this scenario, the most effective resolution is the removal of the registered fingerprint. Yet, traditional methods of removing the fingerprint can be difficult and pose security risks. In this case, going for tools like Wondershare Dr.Fone is the best choice. This tool ensures your Pixel device is at no risk.

Dr.Fone offers a swift solution to remove the Android lock screen in five minutes. It effectively removes 4 types of screen locks. These include patterns, PINs, passwords, and fingerprints. Dr.Fone can bypass the Android FRP lock without needing a PIN or Google account. It ensures accessibility to the Android device without such credentials.

arrow

Dr.Fone - Screen Unlock (Android)

The Best UnlockJunky Alternative to Bypass FRP and Solve Your Screen Locks

  • Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
  • Bypass the FRP lock of Samsung without a PIN or Google account.
  • Everyone can handle the lock screen without any tech knowledge.
  • Provide specific removal solutions to promise good success rate.

4,008,672 people have downloaded it

Prominent Features of Wondershare Dr.Fone

  1. FRP bypass is enabled for brands like Samsung, Xiaomi, Redmi, Oppo, Realme , and Vivo.
  2. With Dr.Fone, bypassing screen locks can be achieved without data loss.
  3. Fone supports 2000+ Android phones and tablets from over 18 brands for screen unlocking.

Step-by-Step Guide To Remove Fingerprint Type Lock on Google Pixel Using Dr.Fone

With Dr.Fone, you can resolve the Tecno Spark 10 5G fingerprint sensor not working issue within minutes. Below is a detailed walkthrough for removing a fingerprint lock on a Google Pixel:

  • Step 1: Connecting and Accessing Screen Unlock Feature on Dr.Fone

Open Wondershare Dr.Fone and connect your Android device via a USB cable. Once the connection is established, navigate to the “Toolbox” tab and choose “Screen Unlock.” Upon reaching the new screen, choose the “Android” option. Then, select “Unlock Android Screen” from the options on the following screen.

opt for dr fone screen unlock

  • Step 2: Selecting Google As the Tecno Spark 10 5G device Brand and Activating Recovery Mode

Afterward, you’ll be guided to a subsequent screen prompting you to choose the Tecno Spark 10 5G device brand, Google. Once you select the brand, you’ll be directed to enter a specific mode corresponding to it. For Google Pixel Devices, the specific mode to enter is Recovery Mode. Simply follow the on-screen instructions to activate Recovery Mode on your device.

put your device in recovery mode

  • Step 3: Initiate the Fingerprint Removal Process

After entering Recovery Mode, the screen unlocking procedure will initiate automatically. Please wait for the fingerprint removal process to finish. In case of failure, select “Try Again” to attempt unlocking again. Upon successfully unlocking your Android device’s screen, tap “Done.”

screen unlocked successfully

https://techidaily.com

Part 2. 11 Conventional Solutions To Resolve Pixel Fingerprint Not Working

The solution above using Wondershare Dr.Fone is an effective and comprehensive method. It can tackle fingerprint recognition issues, but sometimes, users may look for simpler alternatives. We will explore conventional solutions that can address Pixel fingerprint problems. Each solution will also explain the underlying reasons for the Pixel 6 fingerprint sensor issue.

1. Fingerprint Sensor Not Touched Firmly

Problem

If the fingerprint sensor fails to recognize your fingerprint, it might be due to inadequate pressure. This could also be due to improper finger placement on the sensor.

Solution: Firm Placement

Ensure you firmly place your finger on the sensor, covering it entirely. Avoid too much pressure, but make sure the sensor fully contacts your fingerprint.

gently press fingerprint sensor

2. Device Showing Glitches

Problem

Glitches or software bugs in your Pixel device may cause disruptions. This can include issues with the fingerprint sensor’s functionality. These problems can range from minor issues to severe software glitches.

Solution: Restart Your Pixel Device

One of the easiest and simplest solutions is to restart your Pixel phone. You can do that by pressing the “Power” and the “Volume Up” keys. It will lead to a pop-up power menu where you must choose “Restart” to reboot your device.

restart google pixel device

https://techidaily.com

3. Outdated Firmware

Problem

An outdated operating system or firmware can lead to compatibility issues. This can lead to malfunctioning features like the Pixel 6A fingerprint sensor not working.

Solution: Check for Updates

The best way to resolve this issue is to update your Pixel device. Having an outdated version of Android OS can lead to an accumulation of bugs and glitches. Moreover, it can seriously affect the Tecno Spark 10 5G device’s performance, causing many issues. Here is how to check and update your Pixel phone:

Instructions. On your Pixel device, access the “Settings” app. Within Settings, scroll down to tap the “System” option. On the following screen, hit the “System update” option to check if any latest update is available. Here, if you see any updates, download and install them promptly. Before initiating the update, ensure your device is connected to a stable Wi-Fi network with sufficient battery charge.

update device to latest version

4. Dirty Phone or Sensor

Problem

Accumulated dirt, dust, or residue on the phone or fingerprint sensor can cause obstruction. This can lead to the failure to properly recognize your fingerprint.

Solution

1. Cleaning the Phone

Employ a gentle, dry microfiber cloth for wiping down the complete surface of your Pixel device. Take particular care to thoroughly clean the region surrounding the fingerprint sensor. Refrain from utilizing rough substances or strong chemicals as they could potentially cause harm to the Tecno Spark 10 5G device.

2. Fingerprint Sensor Cleaning

Gently wipe the fingerprint sensor area using a clean, dry cloth to ensure thorough cleaning. For better results, consider using a dampened cotton swab with water or isopropyl alcohol. Before using it again, ensure the sensor is entirely dry.

3. Compressed Air or Soft Brush

Use compressed air or a soft brush if there’s visible debris or particles around the sensor. Be cautious not to apply excessive pressure that might damage the sensor.

dirty sensor or phone issue

https://techidaily.com

5. Screen Protector: Dirty or Damaged

Problem

A smudged or impaired screen protector might disrupt the working of the fingerprint sensor. This can potentially cause it to fail to recognize your fingerprint.

Solution

1. Clean the Screen Protector

Start by effectively cleaning the screen protector on your Pixel device. For a thorough cleaning, consider utilizing a screen cleaning solution. Ensure that the screen protector is free from any dirt or debris.

2. Replace Damaged Protectors

Is the screen protector visibly damaged, scratched, or peeling off? If yes, consider replacing it with a new one. Damaged protectors can hinder fingerprint recognition and compromise device protection.

3. Check Compatibility

Ensure the screen protector is designed to be compatible with fingerprint sensors. Some protectors may obstruct or interfere with the sensor’s functionality.

4. Remove Air Bubbles

There can be air bubbles trapped under the screen protector. If there are, gently press them out towards the edges using a card designed for this purpose.

protector screen dirty or damaged

6. Clean Your Finger

Problem

The problem may lie with your fingers rather than the Tecno Spark 10 5G device. Unclean or moist fingers can hinder accurate fingerprint recognition on the sensor, causing the Tecno Spark 10 5G fingerprint sensor to not work.

Solution

1. Cleanse and Dry Your Hands

Remove any dirt, oil, or moisture that might cause issues with the fingerprint sensor. It’s crucial to wash and thoroughly dry your hands. Additionally, verify that your fingers are entirely dry before engaging the sensor. The reason is any moisture or dampness may cause inaccuracies in fingerprint identification.

2. Avoid Oily or Greasy Substances

Refrain from touching oily or greasy surfaces before using the fingerprint sensor. These substances can transfer onto your fingers, affecting sensor accuracy. If your fingers are dirty or damp, pause to clean them using a dry, clean cloth.

cleaning finger to use fingerprint

7. Covering Screen if Fingerprint on Screen

Problem

Fingerprint marks or smudges on the screen might disrupt sensor functionality. This leads to inaccurate recognition when you try to unlock your device.

Solution

1. Avoid Covering the Sensor Area

Be cautious while cleaning the screen to avoid covering or smudging the area around the fingerprint sensor. Precise cleaning around this area prevents interference with sensor functionality.

2. Use Proper Holding Technique

While holding the Tecno Spark 10 5G device, avoid placing your fingers or palms over the fingerprint sensor. Opt for holding the Tecno Spark 10 5G device to minimize accidental contact with the sensor area.

hold phone properly

8. Fingerprint Sensor Not Visible

Problem

Misconfigured settings on your Pixel device can lead to situations where the fingerprint sensor is not visible. It can lead to scenarios where the Tecno Spark 10 5G device fails to recognize your screen unlocking attempt.

Solution: Adjust the Setting To Consistently Display the Sensor

You must adjust the display settings to ensure the fingerprint sensor is always visible. To do that, you can begin by opening the Settings app. Navigate to the “Display” tab and select “Lock Screen.” On the following window, toggle on “Always show time and info.”

put sensor to always display

9. Low Touch Sensitivity

Problem

The fingerprint sensor may have low touch sensitivity . It can lead to difficulties in accurately recognizing fingerprints, leading to Tecno Spark 10 5G fingerprint not working.

Solution

1. Adjust Sensitivity Settings

Accessories like a screen protector might impact the performance of your Pixel device’s touch sensitivity. When using a screen protector, your Pixel enhances touch sensitivity. To do that, navigate to the Settings app and open it. Move to the “Display” window and scroll down to the last option. Toggle on the “Screen protector mode” to increase the screen sensitivity.

turn on screen protector mode

2. Finger Re-Enrollment

Delete existing fingerprints and re-register them. This re-enrollment can sometimes improve sensitivity and help remove the issues. Here is how you can delete and re-enroll your fingerprint:

  • Step 1. In the Settings app of your Pixel, tap “Security & Privacy.” Then, press “Device Unlock” and choose “Fingerprint Unlock.” The device will now ask you to provide your device PIN or password.

navigate to security settings

  • Step 2. Tap “Fingerprint Unlock” on the following screen and delete the previously enrolled fingerprints. Then, press “Add fingerprint” and follow the on-screen prompts to complete the process.

add new fingerprint

10. Other Hardware Issues

Problem

Persistent fingerprint sensor problems might indicate underlying hardware issues . This could go beyond common troubleshooting and might require professional help.

Solution

1. Inspect for Physical Damage

Thoroughly examine your Pixel device for any physical damage. These include cracks, dents, or scratches around the fingerprint sensor area. Physical damage could affect the sensor’s functionality.

2. Safe Mode Check

Boot the Tecno Spark 10 5G device in safe mode to determine if third-party apps are causing conflicts. To do that, press the “Power” key with any volume key to access the power menu. Afterward, long-press the “Power Off” option until the “Reboot to Safe Mode” option appears on your device’s screen. Press “OK” to reboot into Safe Mode and test the fingerprint sensor’s functionality.

reboot google pixel to safe mode

3. Professional Assessment

If you suspect hardware issues, seek professional help from authorized service centers. A clear sign of hardware issues can be visible damage or the sensor failing to function even in safe mode.

11. Factory Reset as Last Resort

Problem

Did all other troubleshooting methods fail to resolve persistent fingerprint sensor issues? Then, a factory reset might be required to revert the Tecno Spark 10 5G device to its original settings.

Solution

1. Backup Data

Before initiating a factory reset, ensure that all crucial data is safeguarded. This encompasses contacts, photos, documents, and any other significant files. Use Google’s backup services or third-party apps to securely back up your data .

2. Initiating Factory Reset

Proceed with the following steps to execute a factory reset on your Pixel device:

  • Step 1. On your Pixel smartphone, navigate to Settings and access the “System” tab. Here, scroll down to the bottom and tap “Reset Options.”

head to system settings

  • Step 2. In “Reset Options,” choose “Erase All Data (Factory Reset)” to continue. Afterward, select “Erase All Data” on the next screen and follow the instructions to complete the process.

factory reset your device

In summary, this article detailed various methods to fix the Tecno Spark 10 5G fingerprint not working. Diverse approaches were explored, from simple steps like sensor cleaning to advanced solutions like factory resets. However, Dr.Fone stands out among these solutions as a top-tier option. It offers a secure and efficient resolution to the persistent problem of fingerprint failure on the Tecno Spark 10 5G .


Also read:

  • Title: In 2024, The Ultimate Guide How to Bypass Swipe Screen to Unlock on Tecno Spark 10 5G Device
  • Author: Marry
  • Created at : 2024-10-01 04:11:17
  • Updated at : 2024-10-08 05:58:48
  • Link: https://unlock-android.techidaily.com/in-2024-the-ultimate-guide-how-to-bypass-swipe-screen-to-unlock-on-tecno-spark-10-5g-device-by-drfone-android/
  • License: This work is licensed under CC BY-NC-SA 4.0.
On this page
In 2024, The Ultimate Guide How to Bypass Swipe Screen to Unlock on Tecno Spark 10 5G Device