The Ultimate Guide: How to Bypass Swipe Screen to Unlock on Tecno Spark 20 Pro+ Device

Nowadays, the security mode is enabled in almost all digital devices, which is the case with our smartphones. However, when we repeatedly change our password, we might be in a state of confusion to remember it. Such instances are highly schemed to lock our messages, galleries, emails, and other personal storage. Using the locking pattern enhances security, and thus, apart from the known user of the Tecno Spark 20 Pro+ device, unknown people cannot access your Android phone. To overcome this critical situation, we have this article to help you unlock your Android devices by removing or bypassing the swipe lock Android screen. The solutions provided in this article are easily accessible to all users and are easy to operate.

So, if you have ever been stuck due to a lock code, go through the article to resolve the issue and swipe up to unlock a password that somehow gets forgotten.

Part 1: How to disable Swipe Screen to unlock when you can access the phone?

Some people do not pay much attention to their privacy and will not bother locking their Android devices. They would disable the swipe screen to unlock their devices. Thus, this section will talk about the basic solution to disabling the swipe up to unlock Android devices. Our main focus here is on a disabling method of swiping the screen when your Android device is accessible.

Let us look at the detailed steps below to remove the swipe screen to unlock the Android phone.

Step 1: To begin with, touch the gear icon (that is setting) on the main screen of your Android phone. The settings screen will display directly since it is a shortcut to get in. You will get a drop-down menu where you will see many options are available for your flexibility.

Step 2: Out of those, choose the “Security” tab to access your further.

Step 3: It will prompt the tab as “Screen security,” You will be listed with three choices, namely, Screen lock, Lock screen options, and Owner Information.

Step 4: Select the option called “Screen lock,” The next step is to enter your PIN code for security purposes. This step is carried out in Android phones to ensure you are the original owner of the Android device.

Step 5: If you click the PIN code option again, the drop-down menu will be listed with more options. Now select the option “None.”

That’s all. You have successfully run out of the disable commands for the swipe up to unlock the screen. You can now open and access your device without any security methods.

Part 2:How to remove/bypass Swipe to unlock when the phone is locked?

To unlock your device, the only solution is to follow the Dr.Fone - Screen Unlock (Android) . If you are looking to unlock the screen when the phone is locked, then this method solidly proves to bypass swipe lock Android when it is locked. It helps to resolve this issue by bypassing or removing the swipe screen without causing any loss to your data. This tool temporarily supports bypassing Android screens without data loss on Samsung and LG. As for other Android phones, all the data will disappear after unlocking with this tool.

The features of this Dr.Fone software are many. It gives a solution to four lock methods: a pin, pattern, fingerprint, and password. It is user-friendly, and even a user with no technical information can also use it with no issue. This tool is only limited to remove the screen lock on Samsung and LG without losing data. Your data will still be wiped out on other Android phones after using this tool.

Dr.Fone - Screen Unlock (Android)

Remove 4 Types of Android Screen Lock without Data Loss

• It can remove four-screen lock types - pattern, PIN, password & fingerprints.
• Only remove the lock screen. No data loss at all.
• No tech knowledge asked. Everybody can handle it.
• Work for Samsung Galaxy S/Note/Tab series, and LG G2, G3, G4, etc.

4,008,669 people have downloaded it

Tips: This tool also supports unlocking other Android screens beyond Samsung and LG. However, it does not support saving all the data after unlocking, like Samsung and LG.

Step 1: Initialize the Dr.Fone on the computer, and there will be many options in front of you. In that, select the “Screen Unlock”.

Step 2: Now, to bypass swipe lock Android, using the USB cable, connect the Android device to your computer, and it will prompt the Unlock Android Screen option.

Step 3: To enable the download mode on your Android device, shut down your phone>Simultaneously, press the volume down, Home button, and Power button >Press the Volume up button. Once your device is in download mode, the recovery kit will get downloaded.

Step 4: You will see the result right in front of you as Dr.Fone - Screen Unlock, recovery will bypass swipe lock Android without hampering your data. Foremost, you can now access your device without swipe up to unlock the screen.

Pretty simple, right? Dr.Fone - Screen Unlock to the rescue for the issue of swipe screen to unlock.

Part 3: How to turn off the swipe to unlock when the pattern is enabled?

In this section, we will cover how to turn off the swipe to unlock when the pattern lock of the Tecno Spark 20 Pro+ device is enabled. Therefore, here we will go through the process of turning off the swipe to unlock the feature of your device. This structure is formed in some interval of locking the screen.

The steps below imply turning off of swiping screen instantly:

Step 1: At first, open the app “Setting” present on your Android device.

Step 2: There will be multiple interfaces. Now choose the option “Security.”

Step 3: To turn off the swipe screen, when the pattern is enabled then, choose “Screen lock” and then click on “NONE.”

Click here

Step 4: If you have enabled your pattern choice already, it will again prompt you to enter the pattern. Once you entered the pattern, the swipe screen lock will disappear.

Step 5: The final step is to reboot your Android device to update the feature of turning off the swipe screen. Now you can open your device at any time without using the pattern lock feature.

Note: Regardless of any situation of forgetting the Android lock password, you can go for an email account set up for swiping into the Android devices.

Conclusion

Now, to sum up, we would say that in this article, we tried to bring out the best solutions for your Android device in such cases wherein you want to disable your screen security. The Dr.Fone - Screen Unlock is simply a proven mechanism that delivers what we need and that, too, without any data loss. We ensure that you can disable the swipe screen to unlock easily and effectively using the methods given above. Hence, you can access your phone by bypassing swipe lock Android even if you forget the screen lock code. So, don’t just wait, but bring out the solution for the swipe screen to unlock the Android device with Dr.Fone - Screen Unlock (Android) now.

How To Unlock Tecno Spark 20 Pro+ Phone Without Password?

Has your Android smartphone been locked, and are you having trouble unlocking it now because you have forgotten phone password? Looking for methods to remove the password from your Android phone without doing a factory reset?

If the answer is “YES,” you’ve come to the correct spot.

Many people, including you, have had similar issues and wish to know how to unlock an Android phone without a password.

As a result, we have created some of the greatest guidelines or, you might say, top ways that may assist you in unlocking Android phones today, simply for you and countless other Android users.

Part 1: Unlock Your Locked Screen Without Password By 6 Efficient Ways

1. By your Google account

You can use your Google Account to unlock the Android phone password if, after several tries, you are still unable to do so without doing a factory reset.

You need to log into the Google account that is associated with the Tecno Spark 20 Pro+ device, then do the following:

• The unlock pattern may only be used five times before a notification telling you to try again in 30 seconds appears.
• “Forgot pattern” will show up at the bottom of the screen.

• You must enter the Gmail account that is associated with the Tecno Spark 20 Pro+ device here before selecting “Next.”

• That’s it; from this point forward, you may enter any new PIN or pattern that you can recall to unlock your smartphone.

2. Google Find My Device

Using your Google account is a superb method for finding the Tecno Spark 20 Pro+ device when lost or stolen.

In addition, it may be used to lock or ring your smartphone. You may have noticed that there are three options available when using this feature: “Ring,” “Lock,” and “Erase.”

To bypass the Android lock screen, all you need to do is sign into the Tecno Spark 20 Pro+ device’s associated Google account and then follow these steps:

• On any Android device or a computer, go to <www.google.com/android/find> and sign in using your Google account. Choose the Android smartphone you wish to unlock after that.
• After choosing the Tecno Spark 20 Pro+ device, select one of the three options, “lock,” from the list.
• There will be a new pop-up window that you can use to change the Tecno Spark 20 Pro+ device password. Additionally, you can choose to add a phone number or recovery email.
• Confirm it immediately, then input the password you just established on your locked device.

Many Samsung customers have this issue, which prevents them from using their devices. Try using the “Find My Mobile” feature on your mobile if you wish to unlock it if you’re a Samsung user. It would be helpful if you had a Samsung or Android model account.

After that, use Find My Device to unlock your Android phone without losing any data by following the instructions below:

• Sign in with your Samsung account at findmymobile.samsung.com.
• Choose “Lock my screen” from the menu on the left, type a new PIN in the box given, and then click “LOCK.”

Your smartphone will be unlocked, and the password will be changed to the new one after a brief delay.

Click here

3. Use ADB (Android Debug Bridge)

Without a factory reset, Android phone passwords may also be unlocked using the Android Debug Bridge (ADB).

• You must first download ADB to your computer. Visit the Android developer’s website at https://developer.android.com/studio/command-line/adb.html to do this.
• Launch the installer after that to begin downloading crucial software for your machine.

• Here, you must use a USB cable to connect your Tecno Spark 20 Pro+ to the computer
• This will activate the developer option on your smartphone if you navigate to Settings > About Phone > and choose the “Build Number” option seven times.
• After that, activate USB debugging by going to Settings > Developer Options.

• Launch the command prompt in the ADB installation directory after your device is connected to the system.
• Press enter after typing “ADB shell rm /data/system/gesture.key” into the command line.

• Finally, just restart your smartphone and use it as normal.

4. Hard reset (data loss)

Each brand has a unique method for hard resetting a locked Android device. The methods to factory reset locked Android devices from Samsung, LG, HTC, Sony, and Huawei are compiled here.

When your phone is locked, you may access the recovery menu of your phone using its physical keys and choose to hard reset the Tecno Spark 20 Pro+ device. Here’s how to restore a locked phone to factory settings.

• Use the buttons to see the recovery menu.
• Press and hold the Volume Up and Side buttons simultaneously until you see the brand logo on the screen for Android devices without a Power/Bixby/Home button.
• Press and hold the Volume Up, Bixby, and Power buttons all at once if your smartphone has a Power button. Releasing them before a logo arises is advised.
• Use the Volume Down key to highlight Wipe data/factory reset when the Android system recovery option displays, then hit the Power/Bixby key to choose it.
• Allow a few seconds for the factory reset procedure to finish after selecting Yes, or Factory data reset. The phone will reboot once you pick the Reboot system. Now you may configure it as if it were a brand-new gadget.

5. Unlock from Forgot Pattern (android 4.4 or lower)

This is another choice that might assist you in unlocking your phone without a factory reset or password. You may have observed that when pattern lock was enabled on your device, a security PIN question was also prompted at that time.

Therefore, you have the choice to Backup PIN, which might assist you in unlocking your smartphone, if you are unable to unlock it. To do it, take the following actions:

• Click on Android pattern lock.
• You’ll see a notification telling you to try again in 30 seconds after failing many times.
• The “Backup PIN” option will be there; choose it.
• Put the backup PIN and OK here.
• At last, you may unlock your cellphone by entering the backup PIN.

6. Boot into safe mode

Here’s how you can boot into safe mode.

• Hit the power button on your phone.
• Press and hold the volume down button on your phone as the animation begins. Hold it down until the animation is finished and your phone enters safe mode.
• “Safe mode” will be shown at the bottom of your screen.
• Out of safe mode
• Switch off your phone.
• Press the Power button on your phone for around 30 seconds, or until the Tecno Spark 20 Pro+ device restarts.
• You will see that after entering and booting into the safe mode, the lock option will not be visible.
• Then you will also see the option to turn off boot.
• You can get rid of the locked phone by proceeding with that option.

Part 2: Easy Tool To Unlock Android Phone Without Password

If you forget the lock code, you can simply unlock your Android phone using Dr.Fone - Screen Unlock.

Have you encountered the same situation? Do not fret. You may use Dr.Fone - Screen Unlock to unlock the screen lock on Android smartphones. It enables you to erase an Android phone’s password, PIN, pattern, and fingerprint.

Let’s learn how to safely remove the Android lock screen.

Step 1: Connect your phone

Open Dr.Fone on your PC, then select “Screen Unlock” from the list of tools.

The Dr.Fone functionality is still usable with the old UI of the Dr.Fone Mac version, but we will update it as soon as we can.

Connect your Android phone to the PC via a USB cable. then click the “Unlock Android Screen” button on the software.

Step 2. Choose a device model

Nearly all Android devices feature locked displays, including Android. Because the recovery kits for different phone models vary, it’s important to pick the correct device brand to unlock the lock. Every model of supporting hardware is included in the list.

Step 3. Switch to download mode

If you then adhere to the instructions on the software, the phone will enter Download Mode.

• Offset your phone.
• Hold down the Power, Home, and Volume Down keys all at once.
• Use the Volume Up button to start Download Mode.
• Remove the Android lock screen starting now..

Step 4. Download a package for recovery

The recovery package will begin downloading once you set your device in download mode. Wait only till it is completed.

Step 5: Unlock Android without erasing data

After the recovery package download is finished, click “Remove Now.” This operation won’t harm any data on your Android device.

When everything is done, you won’t need to enter a password to access your Android smartphone, allowing you to see all of your data without any limitations.

Bonus Tips: How To Keep Our Data Safe?

Dr.Fone - Phone Backup is an excellent solution to keeping data safe and secure and baking it up before resetting your device, even if you have forgotten your password. You may quickly and conveniently back up practically all forms of Android phone data with Dr.Fone - Phone Backup (Android). Additionally, you may examine and export only certain types of data.

Here’s how you can use Dr.Fone - Phone Backup to keep data safe.

Step 1: Connect your Android phone to your PC.

Open Dr.Fone on your PC, then select “Phone Backup” from the menu.

Next, join your Android phone to the computer with a USB cable. The phone must be in USB debugging mode, please. You will be prompted to approve USB Debugging in a pop-up window on the Android phone if your version of Android is higher. Press the OK button if you would.

Click Backup to start backing up the data on your Android device.

If you have previously used this programme to back up your device, you may review your backup history by clicking on “View backup history.”

Step 2: Choose which file types to backup.

Once the Android phone is connected, select the file types you want to backup. Dr. Fone has previously examined all the file types for you. After that, click Backup to start the backup process.

It will cost some time for the backup. Do not disconnect your Android phone from the computer, use it, or delete any data while making a backup.

When the backup is complete, you may click the View the backup button to see what’s in the backup file.

The Bottom Line

It would be best if you had been able to answer the question, “How to unlock an Android phone without password,” using the techniques we have demonstrated here. The most effective way for resetting an Android phone is Wondershare Dr.Fone - Screen Unlock for Android. You may quickly reset a locked Android phone without a password with only a few clicks.

How to Lock Apps on Tecno Spark 20 Pro+ to Protect Your Individual Information

If you are not a fan of having to go through the process of getting through a pattern or password every time you want to use your phone, the good news is that you don’t have to. There are really just a few Apps on your Android device that have sensitive information you don’t want others getting access to. It would really be great if you could lock those apps individually as opposed to locking the Tecno Spark 20 Pro+ device as a whole.

Well, in light of helping you out, this article will address just how you can lock Apps on your device and not have to type in a code every time you want to use the Tecno Spark 20 Pro+ device.

Part 1. Why you need to Lock Apps on Android?

Before we get down to the business of locking some of your Apps, let’s look at some of the reasons why you would want to lock certain apps.

• You may simply want better access on your device. Locking certain apps will allow you to easily access the Tecno Spark 20 Pro+ device and use it without having to remember passwords and patterns.
• If you are a person who is not good at remembering passwords or patterns, simply locking certain apps will help you not get locked out of your entire device which can cause a lot of problems.
• If your device is used by more than one person, locking certain apps will keep the other users out of information you would rather they didn’t access.
• If you have children, you can eliminate the many accidental in-app purchases by locking the apps your children shouldn’t be on.
• Locking apps is also a good way to keep children from content they shouldn’t be accessing.

Part 2. How to Lock Apps in Android

There is always a good reason to Lock Apps on your device and we have two easy and effective methods you can use to do this. Choose the one that you are most comfortable with.

Method One: Using Smart App Protector

Smart App Protector is a freeware that allows you to lock specified applications.

Step 1: Download and Install Smart App Protector from the Google Play Store and Launch it. You may be required to install a helper application for Smart App Protector. This helper will ensure that the many App services running on your device will not be killed by third party apps.

Step 2: The default password 7777 but you can change this in the Password & Pattern Settings.

Step 3: The next step is to add apps to the Smart App Protector. Open the Running Tab on Smart Protector and tap on the “Add” button.

Step 3: Next, select the apps you would like to protect from the pop up list. Tap on the “Add” button once you have chosen your Apps.

Step 4: Now close the app and the Apps chosen will now be password protected.

Method 2: Using Hexlock

Step 1: Download Hexlock from the Google Play Store. Once it is installed, open it. You will be required to enter a pattern or PIN. This is the lock code that you will use every time you open the app.

Step 2: Once the PIN or Password is set, you are now ready to lock apps. You can create multiple lists of Apps to be locked ba_x_sed on your different needs. As an example, we have chosen the Work panel. Tap on “Start Locking Apps” to start.

Step 3: You will see a list of Apps to choose from.  Choose the Apps you wish to lock and then Tap the down arrow in the upper left when you are done.

You can then Swipe to the left to move to other lists such as “Home” and proceed to lock apps in this group as well.

Part 3. 6 Private Apps that you should lock on your Android

There are certain apps that may require to be locked more than others. Of course the choice of which apps you should lock will depend on your own uses and preferences. The following are some of the apps you would like to lock for one reason or another.

1. The Messaging App

This is the application that allows you to send and receive messages. You may want to lock this app if you use your device to send messages of a sensitive nature that you would rather keep private. You may also want to lock this app if your device is used by more than one person and you don’t want other users reading your messages.

2. Email App

Most people use individual email applications such as Yahoo Mail App or Gmail. This is another critical one if you are going to protect your work emails. You may want to lock the email app if your work emails are sensitive in nature and contain information that is not for all individuals.

3. Google Play Services

This is the application that allows you to download and install applications to your device. You may want to lock this one if you are trying to prevent other users from downloading and installing further apps to your device. This is especially valuable if your device is utilized by children.

Click here

4. Gallery App

The Gallery app displays all the images on your device. The main reason you may want to lock the Gallery app may be because you have sensitive images that are not suitable for all viewers. Again this is ideal if children make use of your device and you have images that you would rather they didn’t see.

5. Music Pla_x_yer App

This is the Application that you use to play the music on your device. You may want to lock it if you don’t want anyone else making changes to your saved audio files and playlists or don’t want someone listening to your audio files.

6. File Manager App

This is the App that displays all of the files that are saved on your device. It is the ultimate app to lock if you have sensitive information on your device that you would rather not share. Locking this app will ensure that all of the files on your device will remain safe from prying eyes.

Having the ability to lock your Apps is an easy way to keep information out of the limelight. It also allows you to take full control of your device. Try it, it might just be freeing as opposed to locking your entire device.

Also read: