In 2024, Universal Unlock Pattern for Vivo S18

Universal Unlock Pattern for Vivo S18

Why do you use a mobile password or pattern to lock your phone? Of course, you want to keep your personal information private from prying eyes. Have you ever been in a position where you recently changed your pattern lock or password code but then forgot it? We’ll talk about how to unlock your Android phone’s universal pattern lock.

We’ve recently received many feedback and questions from users who want to use a pattern unlock on their device. Whether you’ve forgotten your Android device’s password or want to gain access to someone else’s phone, there are a number of ways to figure out how to unlock a pattern on an Android phone. This comprWe’llhensive guide wi show you how to unlock patterns in six ways.

Part 1: Common universal unlock pattern for Vivo S18

Today, many mobile phone users present a simple lock pattern that isn’t particularly strong or difficult to detect. That is something that many of us are guilty of. Lock patterns were intended to take the place of traditional passwords, however, we frequently forgo security in favor of easier lock patterns. Let’s look at some of the most frequent pattern locks in use today.

Patterns from the Upper Left Corner: It’s estimated that 44% of people begin their patterns from the upper left corner.
Other Corners: According to research, around 77 percent of users begin their patterns in one of the remaining three corners.
Nodes: It was discovered that many users only utilized five nodes. While a larger number of individuals used 4 nodes.
Letter Patterns: According to a study, around 10% of lock patterns are in the form of an alphabet. Some users just use the initial of their name.

Part 2: [Easiest] Universal way to Unlock Pattern for Vivo S18

If you want the easiest method to unlock an Android phone, then Dr.Fone - Screen Unlock (Android) is an amazing choice. It is a tool that allows you to unlock your phone without much hassle. You can use it for universal pattern lock for MI, or other phones.

If you need to unlock a pin, pattern, password, fingerprint, or any other type of lock on an Android smartphone, Dr.Fone - Screen Unlock is the tool to use. It is a highly useful and sophisticated tool that allows you to bypass your device’s lock screen without harming it or erasing its contents (if your phone is not a Samsung or LG, the data will be erased after unlocking the screen).

Dr.Fone - Screen Unlock (Android)

Remove Android lock screen in 5 minutes

On Android, disable all patterns, PINs, passwords, and fingerprint locks.
Bypass Android FRP lock without a PIN or Google account.
During the unlocking process, no data is lost or hacked.
On-screen instructions are simple to follow.
Mainstream Android devices are supported.

3,291,332 people have downloaded it

Know how do you use Dr.Fone - Screen Unlock (Android) to unlock a pattern lock

Step 1: Download and run Dr.Fone – Screen Unlock to unlock your phone’s pattern. Select the “Screen Unlock” option from the home screen.

Step 2: Make sure your device is connected to the system. Select “Android” to continue, then click the “Unlock Android Screen” button once it has been recognized.

Step 3: On the next screen, choose the correct model and other information of your device.

Step 4: Now, turn your phone into download mode. Turn it off and simultaneously hit the Home, Power, and Volume Down keys. Then, on your device, hit the Volume Up key to enter Download Mode.

Step 5: Relax while downloading the recovery software and completing the necessary steps to unlock your handset.

Step 6: Click on “Remove Now” button and the unlocking process will begin.

Step 7: When the process is finished, you will be alerted. Simply unplug your device and use it without a password or pattern lock.

safe & secure

Part 3: Other ways to Unlock Pattern for Android

There are other ways to unlock the universal unlock patterns for Android. We have mentioned some of them below.

Way 1: Remove Gesture File Using ADB

The first method is ADB, which stands for Android Debug Bridge. With the help of this, you can unlock your Android’s universal unlock pattern without the need of a factory reset. However, the process may seem a bit time-consuming to you. Here is how you can do it.

Step 1: Open your PC and head to Android Developer’s site . Download ADB now.

Step 2: Launch it now and install the packages on your PC.

Step 3: Connect your Android to PC now. Before that, make sure to enable USB Debugging. If you don’t know-how, simply head to the “Settings”> “About Phone” and tap on “Build Number” 7 times. This will enable the Developer’s Options.

Step 4: Now go to the Developer Options menu and turn on the USB Debugging.

Step 5: After connecting Android to PC, you need to open the command prompt in the installation directory.

Step 6: Run the following command and press Enter key: adb shell rm /data/system/gesture.key

In regular mode, restart the phone. The pattern will be requested. However, any pattern will unlock the screen.

Way 2: Boot into Safe Mode to Bypass Third-Party App Screen Lock

It’s one of the most straightforward ways to get past the lock screen. One thing to note is that this method is effective only if the lock screen is a third-party app rather than the standard one.

Step 1: Firstly, long-press the Power button to get the power menu.

Step 2: Now, long tap the “Power Off” button and click “OK” when shown the pop-up.

Step 3: This will restart your device in safe mode.

Step 4: This will turn off the third-party lock screen for the time being. Clear the lock screen app’s data, uninstall it, and then reboot to exit safe mode.

Way 3: Unlock Pattern Lock via Factory Reset

This should only be a last option because it will completely delete your device’s data and saved settings. Your device will be reset to factory settings, meaning your device’s settings will get back to the same as when you first bought it. If you want to learn how to unlock a pattern by doing a factory reset, follow these steps:

Step 1: Long press the Home, Power and Volume Up keys to Recovery Mode.

Please note that the Recovery mode method may vary from device to device. So please ensure to check the key combination before you do it.

Step 2: Now go to the “wipe data/factory reset” option using the volume keys. To confirm it, press the Power key.

Step 3: Now, again, confirm the process using the same keys.

Step 4: The phone will perform the factory reset. In a short while, restart your device and there will be no lock screen.

Way 4: Unlock Pattern Lock with Android Device Manager

Android Device Manager unlocking is the second-best service for bypassing the Android lock screen on locked Android devices and tablets. Working on this service is quite straightforward, and it only works if the user has a Google account. This service is accessible and usable from any device or computer.

There are a few things to keep in mind as you use this service to get around the lock screen. If the Android device is compatible, the Android Device Manager will connect it after a few tries. After it has been connected to the Vivo S18 device, we can begin by pressing the “Lock” button.

After pressing the “Lock” button, a popup will appear, asking for a new password to replace the forgotten pin, pattern, or password.

Type the new password once, then confirm it by typing it again. This will change the password in a few minutes and the new password can be used to unlock the Vivo S18 device.

Way 5: Use Forgot Pattern Feature [Android 4.4 Version and Earlier]

If you use an older Android version, you can get rid of the universal unlock pattern by forgot pattern feature. On earlier Android devices, this feature is enabled by default. After a few failed attempts, the warning “Try again in 30 seconds” appears and here is where the steps begin. Let us get to know in detail.

Step 1: Simply enter wrong pattern too many times until try again in 30 seconds warning comes.

Step 2: Select the “Forgot Pattern” option below the message.

Enter the primary Gmail account and password you used to set up your Android smartphone after selecting the same. Then you must provide your Google account information. A new unlock pattern will be emailed to you by Google.

Conclusion

Universal unlock patterns allow you to unlock your phone easily when you think you have forgotten. Well, numerous patterns allow you to unlock the Android. You can choose either of the above to unlock your android phone. If you have failed to use any pattern, you can easily unlock your Android by Dr.Fone - Screen Unlock (Android) . It will let you access yours by unlocking it hassle-free.

How To Unlock Vivo S18 Phone Without Password?

Has your Android smartphone been locked, and are you having trouble unlocking it now because you have forgotten phone password? Looking for methods to remove the password from your Android phone without doing a factory reset?

If the answer is “YES,” you’ve come to the correct spot.

Many people, including you, have had similar issues and wish to know how to unlock an Android phone without a password.

As a result, we have created some of the greatest guidelines or, you might say, top ways that may assist you in unlocking Android phones today, simply for you and countless other Android users.

Part 1: Unlock Your Locked Screen Without Password By 6 Efficient Ways

1. By your Google account

You can use your Google Account to unlock the Android phone password if, after several tries, you are still unable to do so without doing a factory reset.

You need to log into the Google account that is associated with the Vivo S18 device, then do the following:

The unlock pattern may only be used five times before a notification telling you to try again in 30 seconds appears.
“Forgot pattern” will show up at the bottom of the screen.

You must enter the Gmail account that is associated with the Vivo S18 device here before selecting “Next.”

That’s it; from this point forward, you may enter any new PIN or pattern that you can recall to unlock your smartphone.

2. Google Find My Device

Using your Google account is a superb method for finding the Vivo S18 device when lost or stolen.

In addition, it may be used to lock or ring your smartphone. You may have noticed that there are three options available when using this feature: “Ring,” “Lock,” and “Erase.”

To bypass the Android lock screen, all you need to do is sign into the Vivo S18 device’s associated Google account and then follow these steps:

On any Android device or a computer, go to <www.google.com/android/find> and sign in using your Google account. Choose the Android smartphone you wish to unlock after that.
After choosing the Vivo S18 device, select one of the three options, “lock,” from the list.
There will be a new pop-up window that you can use to change the Vivo S18 device password. Additionally, you can choose to add a phone number or recovery email.
Confirm it immediately, then input the password you just established on your locked device.

Many Samsung customers have this issue, which prevents them from using their devices. Try using the “Find My Mobile” feature on your mobile if you wish to unlock it if you’re a Samsung user. It would be helpful if you had a Samsung or Android model account.

After that, use Find My Device to unlock your Android phone without losing any data by following the instructions below:

Sign in with your Samsung account at findmymobile.samsung.com.
Choose “Lock my screen” from the menu on the left, type a new PIN in the box given, and then click “LOCK.”

Your smartphone will be unlocked, and the password will be changed to the new one after a brief delay.

3. Use ADB (Android Debug Bridge)

Without a factory reset, Android phone passwords may also be unlocked using the Android Debug Bridge (ADB).

You must first download ADB to your computer. Visit the Android developer’s website at https://developer.android.com/studio/command-line/adb.html to do this.
Launch the installer after that to begin downloading crucial software for your machine.

Here, you must use a USB cable to connect your Vivo S18 to the computer
This will activate the developer option on your smartphone if you navigate to Settings > About Phone > and choose the “Build Number” option seven times.
After that, activate USB debugging by going to Settings > Developer Options.

Launch the command prompt in the ADB installation directory after your device is connected to the system.
Press enter after typing “ADB shell rm /data/system/gesture.key” into the command line.

Finally, just restart your smartphone and use it as normal.

4. Hard reset (data loss)

Each brand has a unique method for hard resetting a locked Android device. The methods to factory reset locked Android devices from Samsung, LG, HTC, Sony, and Huawei are compiled here.

When your phone is locked, you may access the recovery menu of your phone using its physical keys and choose to hard reset the Vivo S18 device. Here’s how to restore a locked phone to factory settings.

Use the buttons to see the recovery menu.
Press and hold the Volume Up and Side buttons simultaneously until you see the brand logo on the screen for Android devices without a Power/Bixby/Home button.
Press and hold the Volume Up, Bixby, and Power buttons all at once if your smartphone has a Power button. Releasing them before a logo arises is advised.
Use the Volume Down key to highlight Wipe data/factory reset when the Android system recovery option displays, then hit the Power/Bixby key to choose it.
Allow a few seconds for the factory reset procedure to finish after selecting Yes, or Factory data reset. The phone will reboot once you pick the Reboot system. Now you may configure it as if it were a brand-new gadget.

5. Unlock from Forgot Pattern (android 4.4 or lower)

This is another choice that might assist you in unlocking your phone without a factory reset or password. You may have observed that when pattern lock was enabled on your device, a security PIN question was also prompted at that time.

Therefore, you have the choice to Backup PIN, which might assist you in unlocking your smartphone, if you are unable to unlock it. To do it, take the following actions:

Click on Android pattern lock.
You’ll see a notification telling you to try again in 30 seconds after failing many times.
The “Backup PIN” option will be there; choose it.
Put the backup PIN and OK here.
At last, you may unlock your cellphone by entering the backup PIN.

6. Boot into safe mode

Here’s how you can boot into safe mode.

Hit the power button on your phone.
Press and hold the volume down button on your phone as the animation begins. Hold it down until the animation is finished and your phone enters safe mode.
“Safe mode” will be shown at the bottom of your screen.
Out of safe mode
Switch off your phone.
Press the Power button on your phone for around 30 seconds, or until the Vivo S18 device restarts.
You will see that after entering and booting into the safe mode, the lock option will not be visible.
Then you will also see the option to turn off boot.
You can get rid of the locked phone by proceeding with that option.

Part 2: Easy Tool To Unlock Android Phone Without Password

If you forget the lock code, you can simply unlock your Android phone using Dr.Fone - Screen Unlock.

Have you encountered the same situation? Do not fret. You may use Dr.Fone - Screen Unlock to unlock the screen lock on Android smartphones. It enables you to erase an Android phone’s password, PIN, pattern, and fingerprint.

Let’s learn how to safely remove the Android lock screen.

Step 1: Connect your phone

Open Dr.Fone on your PC, then select “Screen Unlock” from the list of tools.

The Dr.Fone functionality is still usable with the old UI of the Dr.Fone Mac version, but we will update it as soon as we can.

Connect your Android phone to the PC via a USB cable. then click the “Unlock Android Screen” button on the software.

Step 2. Choose a device model

Nearly all Android devices feature locked displays, including Android. Because the recovery kits for different phone models vary, it’s important to pick the correct device brand to unlock the lock. Every model of supporting hardware is included in the list.

Step 3. Switch to download mode

If you then adhere to the instructions on the software, the phone will enter Download Mode.

Offset your phone.
Hold down the Power, Home, and Volume Down keys all at once.
Use the Volume Up button to start Download Mode.
Remove the Android lock screen starting now..

Step 4. Download a package for recovery

The recovery package will begin downloading once you set your device in download mode. Wait only till it is completed.

Step 5: Unlock Android without erasing data

After the recovery package download is finished, click “Remove Now.” This operation won’t harm any data on your Android device.

When everything is done, you won’t need to enter a password to access your Android smartphone, allowing you to see all of your data without any limitations.

Bonus Tips: How To Keep Our Data Safe?

Dr.Fone - Phone Backup is an excellent solution to keeping data safe and secure and baking it up before resetting your device, even if you have forgotten your password. You may quickly and conveniently back up practically all forms of Android phone data with Dr.Fone - Phone Backup (Android). Additionally, you may examine and export only certain types of data.

Here’s how you can use Dr.Fone - Phone Backup to keep data safe.

Step 1: Connect your Android phone to your PC.

Open Dr.Fone on your PC, then select “Phone Backup” from the menu.

Next, join your Android phone to the computer with a USB cable. The phone must be in USB debugging mode, please. You will be prompted to approve USB Debugging in a pop-up window on the Android phone if your version of Android is higher. Press the OK button if you would.

Click Backup to start backing up the data on your Android device.

If you have previously used this programme to back up your device, you may review your backup history by clicking on “View backup history.”

Step 2: Choose which file types to backup.

Once the Android phone is connected, select the file types you want to backup. Dr. Fone has previously examined all the file types for you. After that, click Backup to start the backup process.

It will cost some time for the backup. Do not disconnect your Android phone from the computer, use it, or delete any data while making a backup.

When the backup is complete, you may click the View the backup button to see what’s in the backup file.

The Bottom Line

It would be best if you had been able to answer the question, “How to unlock an Android phone without password,” using the techniques we have demonstrated here. The most effective way for resetting an Android phone is Wondershare Dr.Fone - Screen Unlock for Android. You may quickly reset a locked Android phone without a password with only a few clicks.

Rootjunky APK To Bypass Google FRP Lock For Vivo S18

Factory Reset Protection (FRP) is a security feature built into Android devices running Android 5.1 Lollipop and later versions. It prevents someone from using your phone after a factory data reset without Google account login credentials. The FRP makes it much less attractive for thieves to steal Android phones, knowing they will need help to access them.

FRP automatically activates when you add a Google account to your Android phone. It links the Vivo S18 device to your account, making it the “trusted owner.” Once activated, FRP becomes embedded in the phone’s system.

While Google FRP is a valuable security feature, it’s vital to acknowledge that there are legitimate situations where bypassing it might be necessary. These instances include forgotten Google account credentials, buying a second-hand device, and device issues. In these cases, tools like RootJunky can help you bypass FRP Lock. We’ll explore how to use RootJunky APK later, but first, let’s define what it is and its role in FRP bypass.

The RootJunky APK is a free Android application also called RootJunky SDL or RootJunky FRP Bypass tool. This app’s primary function is to bypass the Google Account FRP lock on Samsung devices. Rootjunky uses the weaknesses in Android’s setup process to create a new user account or switch existing ones, letting you bypass the FRP and regain control of your phone.

You can complete this process using the app by connecting your phone to a computer through an OTG cable. RootJunky can be helpfu l if you’ve forgotten your Google account password or bought a second-hand phone locked to someone else’s account. However, only use it if you have legitimate reasons to bypass FRP lock, like accessing your device after forgetting your Google account details.

Downloading the RootJunky FRP bypass tool from unofficial sources can introduce malware risks, so stick to trusted sources like the official website. Additionally, when exploring RootJunky, it is vital to keep the following in mind:

Not all Android devices are susceptible to the methods used by RootJunky. It is necessary to check compatibility with your specific device model and Android version.
Using FRP bypass tools like RootJunkycan potentially compromise the security of your device. Be cautious and proceed if you fully understand the risks involved.
Bypassing FRP may involve data loss.
Download RootJunky FRP bypass APK from a reliable source to minimize the risk of malware or viruses. You can check the APK file from official websites or trusted forums.
Google constantly updates its security measures, so these tools may not always work effectively.

Part 2: How To Use RootJunky To Bypass Google FRP?

Here are the general steps to use the FRP Bypass APK RootJunky app to bypass Google FRP lock. But remember that specific steps may vary depending on your device and Android version:

Step 1: On your computer, download the Rootjunky RealTerm program from the official Rootjunky website.

Step 2: On your phone, download the Rootjunky APK (com.rootjunky.frpbypass-1.0.apk) file from the official website or other reputable sites.

Step 3: Go to Settings > Security and tap Install unknown apps. Then, enable unknown sources to allow installation of apps from outside the Play Store. Connect your device to a Wi-Fi network.

Step 4: On your Android phone, open a file explorer app and install the downloaded RootJunky APK file.
Step 5: Connect your smartphone to your computer using a USB cable.
Step 6: Launch the Rootjunky RealTerm program on your computer. Under the Display tab, check the Half Duplex option.
Step 7: On your computer, go to Device Manager > Modems. Locate your device’s port name (e.g., COM3).
Step 8: On the RealTerm program, enter the correct port number under the Ports tab, then click Change.

Step 9: Click Send to establish a connection. Enter the two commands:
at + creg? \ r \ n
atd1234; \ r \ n
Step 10: Once connected, the Rootjunky APK on your phone will provide on-screen instructions to bypass FRP.
Step 11: If prompted, perform a factory data reset of your device.

While RootJunky offers a free method for FRP bypass, it can be incompatible with your device’s brand, requiring technical knowledge, tedious, and potentially risky. If you are looking for a simpler, safer, and more user-friendly solution, Wondershare Dr.Fone might be a better fit for you. If you want to learn how to use this tool to bypass FRP lock with minimal technical expertise, then keep reading.

Part 3: Easier Tool Than RootJunky APK To Bypass Google FRP

Google FRP adds an extra layer of security after a device reset. However, regaining access to the smartphone can be challenging if you forget your Google account details, forget your lock screen, or just buy a used device. While methods like the FRP RootJunky app exist, using it can be complex or risky.

Consider exploring third-party options like Dr.Fone for a potentially easier and safer FRP bypass solution. Dr.Fone Screen Unlock tool helps remove the Android FRP lock without requiring a PIN or Google Account.

Why Use Dr.Fone - Screen Unlock?

Here are some of the key features of Dr.Fone - Screen Unlock:

**User-friendly:**Fone boasts an intuitive interface, eliminating the need for technical expertise. Even beginners can navigate the process with ease.
**Widespread Brand Compatibility:**Fone supports mainstream brands, such as Samsung, Xiaomi, Oppo, Redmi, Realme, and Vivo, catering to a broader user base.
**Fast and Efficient:**Regain access to your device in minutes without wasting time on tedious procedures.

Step-by-step Guide to Removing FRP Lock With Dr.Fone - Screen Unlock

Ready to leave the hassle of using RootJunky and easily bypass the FRP lock? Download and install Dr.Fone on your computer, then follow these steps to learn how to bypass Google FRP on your device:

Step 1: Launch Dr.Fone on your computer and connect it to your Android device. Choose Screen Unlock from the Toolbox in the main interface.

Step 2: Choose Android as your device type. This will take you to the next screen, where you can select Remove Google FRP Lock to proceed.

Step 3: Select your device’s brand from the list and click Start to continue.

Note:

The next steps may vary depending on the brand you selected.

Step 4: Select the OS version of your device and click Start to continue.

Step 5: Access the secret menu on your phone using the on-screen instructions, then click Next to proceed to the next step.

Step 6: When your Samsung prompts you to activate USB debugging, tap Allow. Then, on your computer screen, click Authorized to confirm.

Step 7: You will see the FRP lock being bypassed on your Android device on the next screen.

Step 8: Click Done if the FRP lock removal was successful, otherwise, click Try Again to repeat the process.

That’s it! With Dr.Fone Screen Unlock, you can easily bypass Google FRP and regain access to your Android device, leaving the complexities of RootJunky behind.

Tips: Are you searching for a powerful FRP bypass tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!

Conclusion

Both RootJunky and Dr.Fone offer options for you to regain control of phones with Google FRP lock. FRP Bypass RootJunky tool excels with its free-to-use approach, perfect for tech-savvy users comfortable with APK installations. While requiring a paid subscription, Dr. Fone provides pre-rooted firmware installations and broader device compatibility, which is ideal for those seeking a more streamlined but supported experience.

The best choice boils down to your personal needs and budget. Remember, FRP bypass should only be utilized by rightful owners facing genuine lockouts. When used responsibly, these tools can help you access your phone after a factory reset even without your Google account credentials. Choose the tool that best fits your needs and proceed with caution. Use these tools responsibly and regain access to your device the right way.