Remove the Lock Screen Fingerprint Of Your Tecno Spark 10C

Users of Android phones can benefit from data and file protection tools like passwords, patterns, and PINs. But there are also some significant disadvantages, for example:

Someone may have repeatedly entered the wrong password to access your phone.
You may have forgotten the PIN on your device, pattern, or PIN.
The lock screen fingerprint can also malfunction if there are repeated tries from an unauthorized finger.

If you use a wrong password or a fingerprint unlock, it can permanently lock your Android device.

We can use many practical methods to remove the Android phone lock screen fingerprint. For example:

According to you, the most typical or initial option must be factory reset. However, when you try the factory reset method, you will lose all data on your phone. So, can you unlock an Android phone without a factory reset? Yes, we will tell you how to unlock your phone without fingerprint and resetting your Android phone.

Follow these methods to bypass the fingerprint lock without resetting the phone. It will save you from losing your data. All our methods are very easy and safe.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Useful Methods to Bypass Fingerprint Lock

1. Restart your Phone

If your fingerprint is not working or the Tecno Spark 10C device prompts you with an error in the fingerprint functioning, possibly the fingerprint reader is not responding, and the Tecno Spark 10C device needs to restart to get rid of this error.

When a device restarts, the fingerprint functionality is restored after entering the Tecno Spark 10C device pattern, password, or PIN. This is the simplest method to reset your fingerprint hardware.

2. Remove your phone battery

Old android phones have removable batteries. If you can remove your phone battery, remove it and then put it back. Now turn on your phone. Doing so can help solve the fingerprint lock issue if there are bugs or system errors.

3. Dr.Fone - Screen Unlock

On Android handsets, you can attempt Dr.Fone to remove the fingerprint without professional skills. It allows you to delete the password, PIN, pattern, and fingerprint from an Android phone.

Step 1: Connect your Android device.

Open Dr.Fone on your PC, then among all the tools, choose “Screen Unlock.”

Step 2: Select a device type.

We are in this part to provide you with two ways to unlock practically any Android handset, including those made by Samsung, Huawei, OPPO, Vivo, Lenovo, LG, and others. It’s crucial to choose the right device brand to unlock the lock because the recovery modes for various phone models vary. The list contains every supported device model.

Here you will have some brands to choose from, don’t make it wrong.

Step 3: Put your device into Recovery Mode.

You will learn how to put your device into Recovery Mode; it’s important to do as instructions, although this part may look a little strange. And there are 3 different Samsung Recovery Modes as examples.

(Get into Recovery Mode in Samsung phone with Bixby)

(Get into Recovery Mode in Samsung phone without Bixby)

(Get into Recovery Mode in Samsung phone with the Home button)

Step 4: Instructions to Wipe Cache Partition

In this part, it is the final but crucial step to unlock your device; if you click any wrong button, your phone may not work anymore.

OK, you already passed the unlock process; locks like pattern, password, or fingerprint disappear!

4. Hard Reset your Device

Users of Android smartphones and tablets can troubleshoot various issues with their devices using a feature known as Android Recovery Mode. For example, it might be helpful if you discover that your device is functioning strangely. Recovery Mode Android technically refers to a unique bootable partition with a recovery application installed inside it.

However, users can also use it to reset the android password if it is forgotten. This password also includes fingerprint locks. The instructions for resetting android devices through recovery mode differ for every android device.

Click here

5. Google Find My Device

As you are likely aware, every Android device is connected to a Google account. As a result, if you’d like, you may also use it to unlock Android. You’ll need to know your Google account login information for this. When you’re ready, use these instructions to find out how to unlock a phone password.

Login using your Google credentials by going to the official Google Find My Device website.
You will see the gadgets connected to your Google account as you enter the interface and a map of where they are.
To wipe the Tecno Spark 10C device, click the ERASE DEVICE option on the left side panel. You will then be required for your password.
Once more, select “Erase.” This will reset the Tecno Spark 10C device and get rid of the dysfunctional fingerprint lock.

6. Seek Help from Local Dealers

It might be a complicated case if you cannot reset your lock screen fingerprint through the methods described above. In this situation, you need to visit your nearest mobile technician, who can help you restore your device.

Why does not Fingerprint Work

1. Fingerprint Hardware Module Problems

The fingerprint module should be clean, just like a clean finger is. Unfortunately, the module would collect liquid from your fingers, especially if you had used a moisturizer earlier, making it difficult for the sensor to read your fingers accurately.

Please inspect the fingerprint module for any fluids or debris and clean it with a dry cloth to resolve this. If the dirt is on the module, clean it with wipes or a moist cloth wet with water.

2. Software Update

Another software-related issue that may occur because “ fingerprint sensor not working” issue is a software defect. Try checking if you have a pending update on your device and install it. Moreover, if the problem started after a system update, you may wait for a new update to fix the problem or go back to the previous update.

To install an update, open the Settings app, tap on ‘System,’ pick ‘System Update,’ and download and install any pending update.

3. Clean your Screen

If you have a device with under-display fingerprint scanner, you might need to clean the screen properly before using the fingerprint. In some cases, screen protectors also interfere with fingerprint functioning.

Conclusion

Any method can solve the problems of using your device with your Android handset. The best thing about these solutions is that you don’t need difficult professional skills to complete the tasks. Dr.Fone-Screen Unlock is the easiest way to help your device if you have a password or fingerprint problem.

How to Reset a Tecno Spark 10C Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Tecno Spark 10C phone that is locked, or how to get into a locked Tecno Spark 10C phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Tecno Spark 10C Phone that is locked?

Before you go to reset your locked Tecno Spark 10C phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Tecno Spark 10C phone typically involves performing a factory reset. The process erases all data and settings on the Tecno Spark 10C device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Tecno Spark 10C , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Tecno Spark 10C Phone That is Locked With Google Find My Device?

Resetting a locked Tecno Spark 10C phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Tecno Spark 10C phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Tecno Spark 10C phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Tecno Spark 10C phone that is locked without a password?

In order to reset your Tecno Spark 10C phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Tecno Spark 10C phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Tecno Spark 10C Phone That Is Locked Without a Password!

Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
Work for forgotten passwords, second-hand Tecno Spark 10C devices, etc.
Everyone can handle the lock screen without any tech knowledge.
Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Tecno Spark 10C phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Tecno Spark 10C .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Tecno Spark 10C device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Tecno Spark 10C Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Tecno Spark 10C phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Tecno Spark 10C phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Tecno Spark 10C Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Tecno Spark 10C device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Tecno Spark 10C phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Tecno Spark 10C phone with Gmail ID and password

It is imperative to understand that unlocking your Tecno Spark 10C Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Tecno Spark 10C phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Tecno Spark 10C device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Tecno Spark 10C. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Tecno Spark 10C phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Tecno Spark 10C phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

Unlock Tecno Spark 10C Phone Password Without Factory Reset: Full Guide Here

In today’s fast-paced digital age, our smartphones are more than just communication devices; they are repositories of our personal and professional lives. However, there comes a time when we find ourselves locked out of our Tecno Spark 10C phones , desperately trying to remember a password or PIN that seems to have slipped our minds. The thought of a factory reset, which wipes our valuable data clean, can be daunting.

But fear not! This comprehensive guide is here to rescue you from the perils of forgotten passwords without factory reset. So, if you’re in a bind and need to regain access to your device, read on for a full guide to know how to unlock Tecno Spark 10C phone password without factory reset!

Method 1: Unlock Tecno Spark 10C Phones Running Older Android OS (4.4 Or Below) With Google Security Questions

Up until Android version 4.4, you could lock your phone screen with a pattern. Google allowed you to unlock the phone by answering security questions in case you forgot the pattern. Since these may also be easily guessed by people who are in possession of your device illegally, Google deprecated this method after Android 4.4. However, the phones running Android 4.4 or lower are still allowed to be unlocked using this method. So, if you have an old Tecno Spark 10C with Android 4.4 or earlier, here is how to unlock Tecno Spark 10C phone password without factory reset:

Step 1: You may already have entered the incorrect pattern a few times. If so, simply tap the Forgot Pattern to start the process of unlocking your Tecno Spark 10C phone screen. Else, deliberately enter incorrect pattern a few times till you see the Forgot Pattern option:

Step 2: Next, choose the option to reset the pattern by answering your Google credentials.

Step 3: Sign into the Google account that matches with the Google account on the phone.

Step 4: Lastly, create a new pattern to unlock your Tecno Spark 10C phone.

Side Tip

Now that you have unlocked your Tecno Spark 10C phone with Google security questions, we have a tip for you. For the safety and security of your data on your phone, it might be time to trade in the Tecno Spark 10C device for a newer phone with the latest Android OS. Between Android 4.4 and the Android 12 prevalent today, there have been massive security updates and code improvements that you can benefit from. It makes sense given that our phones hold a substantially large part of our personal and professional lives these days. And we are not even talking about features that you may or may not need - we are talking only from a data security point of view. Of course, you will also benefit from the massive performance improvements that have taken place thanks to hardware and software improvements over the years.

Method 2: Unlock Your Tecno Spark 10C Phone Using Wondershare Dr.Fone ( Easy & Fast)

Now, since the previous method of unlocking your Tecno Spark 10C phone was deprecated after Android 4.4, what about the phones running newer versions? How to unlock a Tecno Spark 10C phone with a newer Android version? There are still a few methods that are available to you, but the best way to unlock a Tecno Spark 10C phone is to use this nifty little app called Wondershare Dr.Fone. And you will discover that there is nothing little about this app!

Dr.Fone is a collection of several modules unified in a single interface. Each of these modules is designed meticulously to serve a purpose for your device, such as unlocking your phone, repairing your phone, erasing data from your phone or wiping the phone securely, etc. With this approach, users are never encumbered with options. Instead, they can focus on every task in the simplest, easiest manner without worrying about doing something untoward because they could not understand the software. Dr.Fone is fast, intuitive and easy to use.

Step 1: Launch Dr.Fone on your computer. Select the Screen Unlock module.

Step 2: Click Unlock Android Screen.

Step 3: Select the first option – 100% Remove Screen Lock as Tecno Spark 10C devices cannot be unlocked without data loss.

Step 4: Choose your phone brand carefully – Tecno Spark 10C in this case.

Step 5: Complete the instructions to download the software to your phone.

Step 6: The software will start downloading, and if everything went smoothly you will see a screen to click Remove Now.

Step 7: When all is done, you will see the following:

Your Tecno Spark 10C phone screen is now unlocked. Click the button below to unlock Tecno Spark 10C phone password without factory reset now!

Method 3: Factory Reset Tecno Spark 10C Phones (Wipes User Data)

There is a standard factory reset built into every Tecno Spark 10C phone to allow users to erase the Tecno Spark 10C device and start over fully. This option wipes all user data and resets the phone to how you received it in the box. Naturally, this is not a preferred way, as it requires the phone to be set up all over again and that takes time. Also, all data will need to be backed up beforehand in order to restore it again. Overall, this method consumes a lot of time.

Step 1: Go to Settings > Backup & Reset.

Step 2: Tap Factory Reset > Reset Phone.

Step 3: Tap Erase Everything.

Method 4: Use Google Find My Device To Unlock Tecno Spark 10C Phones (Wipes User Data)

Google Find My Device is an online service by Google that is used to locate and track your Android devices. It works like how Apple’s Find My works for its range of hardware. Using Find My Device, you can play a sound on the Tecno Spark 10C device to locate it in the house if you have misplaced it, lock the phone in case it is lost, and wipe the Tecno Spark 10C device remotely.

Step 1: Go to https://accounts.google.com .

Step 2: Log in and go to Security > Your Devices:

Step 3: Click Find A Lost Device.

Step 4: Select the Android device you want to wipe carefully if you have a few:

Step 5: Click Erase Device and confirm.

Step 6: After the erasure, your device will need to be set up all over again.

Method 5: Request Service Provider To Unlock Your Tecno Spark 10C Phone

If your Tecno Spark 10C phone is tied to a service contract and you want to unlock your device to use it with other service providers, this method is for you. You can request your service provider to unlock your Tecno Spark 10C phone provided their conditions are met. Usually, they will be happy to oblige if there are no dues and the service period is over.

Bonus Tip: If You Want To Disable Screen Lock

Sometimes, you may not need to secure your device at all. For example, if you have an old device that you want to use as a media player in your car or to give to children to play games, you may not want to password-protect the Tecno Spark 10C device. This is how to disable screen lock on Android:

Step 1: Navigate to Settings > Security > Screen Lock.

Step 2: Enter the PIN or pattern.

Step 3: Choose None and confirm.

Conclusion

There are a handful of methods you can use to unlock a Tecno Spark 10C phone in case you forget the password or PIN or pattern. Especially for the old pattern-based screen locks, it is easy to unlock the phone if you know the answers to the security questions in your Google account. However, to unlock Tecno Spark 10C phone screen without password on newer Android versions, you need technical knowledge, or you can use third-party software such as Wondershare Dr.Fone. Using Dr.Fone Screen Unlock, you can unlock your phone quickly with no technical mumbo jumbo to confuse you. All you will get is a software that guides you every step of the way so you can unlock Tecno Spark 10C phone easily.