Unlocking the Power of Smart Lock: A Beginner’s Guide for Tecno Spark 20 Pro Users

Google constantly comes up with features to simplify the way users interact and complete tasks on the Android platform. One of the most important features that techies loved to debate about was the Smart Lock Android, a secure password manager functioning in sync with a Google account on the Android phone.

Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Part 1: What is Android Smart Lock?

Android Lollipop added a feature called Smart Lock, and the feature was devised as a smart tool to prevent the Android phone from locking once it was initially unlocked. In other words, the feature overrides an Android phone’s Lock Screen feature, thereby saving users the need to enter passwords every time the Tecno Spark 20 Pro device locks.

If you’re at home, it’s likely your android phone is locked out if you haven’t accessed at for some time. Smart Locks solves the problem in many ways. It allows you to allocate trusted places. Once you within range of the trusted places, your phone won’t lock. Trusted devices come next. Smart Lock is assigned to Bluetooth and Android NFC unlock devices.

Finally, trusted face unlocking is the ultimate face recognition system that unlocks your Android device as soon as you look at it across the front-facing camera. A face unlock first introduced with Android Jelly Bean and has been significantly improved in later versions.

Turning On Smart Lock

The feature is enabled by first accessing settings. For example, in a Samsung Galaxy S6:

Tap on Settings, which is the gear symbol.

• • Click on Personal and tap on Security.
• • Go to Advanced and tap on Trust agents and make sure Smart Lock is turned on.

• • Under Screen Security tap Smart Lock.
• • Here, you need to enter your Screen Lock. If you haven’t done so, set up a password and PIN by following the on-screen prompts. The screen Lock is needed every time you have to change the Smart Lock settings.

Within Smart Lock, there are three options for setting the system. You can set up trusted devices, trusted face, and trusted places individually, combining two or all three at the same time. You can choose just one trusted face, but you have the option to set up as many trusted devices and trusted places as needed.

Part 2: Turn On Smart Lock For Android with Trusted Devices

You can decide on a trusted device to be paired with Smart Lock Android.

For example, you can set up a Smart Lock for Bluetooth in your Android Bluetooth settings. It can also be done for Android NFC unlock devices. Examples include the Bluetooth system in your car, NFC unlocks, android sticker on the car’s phone dock, or Bluetooth in your watch.

• • Go to Settings.
• • Tap on Security and then Smart Lock.
• • Existing paired options are listed under Trusted Devices.
• • Initially, trusted devices will show None.

Tap on Add Trusted Devices.

The next screen is the Choose Device Type.

Since you have already paired Bluetooth, it will ask you to choose the Tecno Spark 20 Pro device from the list.

• • As an example, let’s take the case of LG HBS800. It may show Not connected until you add it.
• • It will show up under Trusted devices in the Smart Lock menu.
• • When you turn the added device on, Smart Lock now unlocks the Android mobile.

Similarly, other Bluetooth and NFC unlock android supported gadgets can be added under the list of Trusted Devices.

Part 3: Turn On Smart Lock For Android With Trusted Locations

You can also add locations or addresses to Smart Lock Trusted Locations, and the phone unlocks automatically as soon as you arrive at the desired location. For example, you can set up your home or work address under Trusted Locations.

Check current settings first.

On a new Android phone, visit Settings>Personal.

Then Lock Screen and Security.

Then Secure Lock Settings.

Tap Smart Lock.

Tap on Trusted Places.

Tap on Add Trusted Places

• • Initiate the Google Maps app on the Android phone. Make sure the Internet and GPS are on.
• • Pick a place.

• • Click on Settings.
• • Click on Edit home or work. You can now add or edit the required addresses.
• • As an example, click on the Enter work address.
• • You now have the option to type in the address or use the address listed on Google Maps as the required work address.

• • A successful addition is listed and can be edited under the Edit work address.
• • Close the Google Maps app.
• • The work address is automatically propagated and configured with Smart Lock settings.
• • Go back to Settings> Security> Smart Lock> Trusted Places.
• • The work address you added is now listed under Work.

• • However, it is not yet configured as a Smart Lock option. Tap the location once, and it is enabled.
• • The switch along the address to the right turns blue, indicating it is enabled.
• • The work address is now listed under Trusted places for Work.

• • The phone is now configured for the work address and will unlock whenever you are at the location.
• • Since it works on Google Maps, the feature works through an Internet connection.

Part 4: Turn On Smart Lock For Android With Trusted Face

The feature recognizes your face and then unlocks the Tecno Spark 20 Pro device. Once you set up the Tecno Spark 20 Pro device to recognize your face as a trusted face, it will unlock the Tecno Spark 20 Pro device as soon as it recognizes you.

PRECAUTION:  At best, this can be the first level of security, as one who resembles you to some extent can unlock the Tecno Spark 20 Pro device. Photographs are not stored in the system. The device does hold necessary data to recognize your face, and the security level is determined by how good the Tecno Spark 20 Pro device is configured. The data is not accessed by any app or loaded onto a Google server for backup.

Setting Up Trusted Face

• • Go to Smart Lock and tap Trusted Face.
• • Tap on Setup. Follow on-screen instructions.

The device begins to gather data about your face. The trusted face icon appears. As a backup, in case Smart Lock does not recognize your face, use the manual system by applying the PIN or password to unlock the Tecno Spark 20 Pro device.

In case Trusted Face is not required, tap on reset Trusted Face appearing under the Trusted Face menu. Tap on Reset to reset the option.

How To Improve Facial Recognition In Your Bluetooth and Android NFC Unlock Devices

• • If you feel facial recognition is not up to the mark, go to Smart Lock and tap on a Trusted face.
• • Tap on Improve face matching.
• • Tap on Next and follow instructions on the screen to complete the task.

Smart Lock Android is a great feature and is only going to improve on time. With added security measures being introduced by Google for Bluetooth and NFC unlock android devices, including configuration to Google maps and Gmail, the feature may be one of the most important features to overcome constant blocking of devices even in protected places.

Video on How to Remove Android Lock Screen Without Data Loss

How to Reset a Tecno Spark 20 Pro Phone that is Locked?

We all have been there when put a tough to crack the lock on the smartphone and forget the password all along. Such circumstances can be tedious at times, but there is a way around it. If you have spent countless hours on how to reset a Tecno Spark 20 Pro phone that is locked, or how to get into a locked Tecno Spark 20 Pro phone quickly with or without Factory Reset. This is the right article for you. Here we will describe all the different ways in which you can reset your phone with the convenience of software to even reset it manually. So, without making further due, let’s jump right into it.

Part 1: What should I be aware of before resetting a Tecno Spark 20 Pro Phone that is locked?

Before you go to reset your locked Tecno Spark 20 Pro phone, it’s crucial to learn about a few key factors. These factors will enable you to make a well-informed choice and help avoid potential complications during the factory reset process.

1. Data Loss

Resetting your locked Tecno Spark 20 Pro phone typically involves performing a factory reset. The process erases all data and settings on the Tecno Spark 20 Pro device. This includes your files, apps, contacts, and other information stored on the phone. You can easily restore these data if you have backed up data before. It’s crucial to back up essential data regularly to avoid data loss.

2. Factory Reset Protection (FRP)

Tecno Spark 20 Pro , like many other Android manufacturers, implements Factory Reset Protection. It acts as a preemptive safeguard against unauthorized access to a device after a reset. If your phone is linked to a Google account, you will need to input the accurate login credentials after a reset.

Failing to do so may lead to your device being locked. Understanding how to bypass or recover from FRP lock is essential if you find yourself in this situation.

Part 2: How to Reset a Tecno Spark 20 Pro Phone That is Locked With Google Find My Device?

Resetting a locked Tecno Spark 20 Pro phone through Google Find My Device presents a convenient solution. It, however, needs you to have activated this functionality on your device. To initiate the reset, please adhere to the following steps:

Step 1: Open a web browser on any computer or alternative device and navigate to the Google Find My Device website. Sign in with the same Google account associated with your locked Tecno Spark 20 Pro phone.

Step 2: Upon successful login, a list of devices linked to your Google account will be displayed. Locate your locked Tecno Spark 20 Pro phone from the list and select it. Select the “Erase Device” option from the left-hand panel, and it will trigger a remote factory reset for your locked phone.

Step 3: A confirmation dialog will appear, prompting you to input your Google account password. Finally, click the “Erase” button to initiate the factory reset process.

Part 3: How to reset a Tecno Spark 20 Pro phone that is locked without a password?

In order to reset your Tecno Spark 20 Pro phone without a password, you need to have a single software known as Dr.Fone - Screen Unlock (Android) . It’s a powerful and versatile software tool designed to help you unlock your devices under various circumstances. Whether you’ve forgotten your device’s password, PIN, pattern, or fingerprint, or you’re dealing with a locked device due to a broken screen, Dr.Fone - Screen Unlock (Android) can assist you. In order to reset phone correctly, go through the steps given below:

Before resetting your Tecno Spark 20 Pro phone that is locked, you can install the Dr.Fone application on your Windows PC or Mac first.

Dr.Fone - Screen Unlock (Android)

The Best Unlock Tool to Reset a Tecno Spark 20 Pro Phone That Is Locked Without a Password!

• Remove all Android screen locks (PIN/pattern/fingerprints/face ID) in minutes.
• Work for forgotten passwords, second-hand Tecno Spark 20 Pro devices, etc.
• Everyone can handle the lock screen without any tech knowledge.
• Provide specific removal solutions to promise good success rate.

4,008,671 people have downloaded it

Step 1: Launch the Program

First of all, launch the Dr.Fone Screen Unlock on your computer, and you will be greeted with a welcome screen like this. Now, head over to the “Screen Unlock” section.

Step 2: Connect Device

Now, you need to connect your Tecno Spark 20 Pro phone to the computer via a USB cable and select “Android” > “Unlock Android Screen.” This particular step is an application for all the Android phones out there.

Step 3: Choose Device Model

Here you need to select the exact brand of your phone. In your case, you can just tap “Tecno Spark 20 Pro .” The program then will start the process for the lock screen removal.

Step 4: Unlock Screen

Go along with the instructions on the screen and remove all the settings of the Tecno Spark 20 Pro device. Within a short while, the screen will be unlocked.

After the entire process is completed, you can easily access your Tecno Spark 20 Pro Phone without the need to enter your password. All the restrictions that were set properly to unlock will be removed so that you can use your phone as intended.

Part 4: How to reset a Tecno Spark 20 Pro phone that is locked with a hard reset

Disclaimer: Only perform this step if you are well accustomed to the Android recovery system or at least know your way around your Tecno Spark 20 Pro phone.

That being said, you should only resort to using a hard reset if you don’t have any important data on your phone. Further including, resetting your phone with the hard reset option will wipe out any data that’s been stored in it. Now, proceed forward will all the steps are given below:

Step 1: Charge Device

Charge your Tecno Spark 20 Pro Phone so that it has a batter of at least 30% or higher. Then turn off the phone.

Step 2: Press keys

Now, you need to press the Volume Down + Power button simultaneously until the Tecno Spark 20 Pro device logo shows up on the screen.

Step 3: Enter Recovery Mode

Now, press the Volume Down button to navigate to the Recovery Mode.

Step 4: Factory Reset

Use the buttons to navigate to the “Wipe data/factory reset” option and select it by pressing the Power button. Now, choose the option ”Factory data Reset” and wait for a few seconds till it is completed.

Step 5: Reboot Now

Again use the Volume buttons and select the “Reboot system now.”

After you have successfully reset your Tecno Spark 20 Pro phone, it would take a few minutes to boot up. Once that is done, you are left with a clean slate, just like a completely new smartphone.

Part 5: Unlock locked Tecno Spark 20 Pro phone with Gmail ID and password

It is imperative to understand that unlocking your Tecno Spark 20 Pro Phone using a Gmail ID and password should be your last resort and especially if you are using an older version of Android. Among all the tricks of how to reset a Tecno Spark 20 Pro phone that is locked, it only works if you are running around version 4.4 KitKat or older than that. Neither less to say, in order for the step to work properly, you need your Gmail account to be properly configured with the Tecno Spark 20 Pro device.

Step 1: Attempt Passwords

At first, you need to make five attempts to unlock your device. Whether you have used a PIN or Pattern lock, Android will always give you five attempts to get the password right. Once you get that, it will trigger the “Forget Password/Pattern” option on Your Tecno Spark 20 Pro. This way, you can sneak back into the system once again.

Step 2: Enter Credentials

Once you hit the option, you will be redirected to another page, where you need to enter your Gmail id and password. Make sure that you get the information right, and select “Sign in.”

Once you get everything right, this will bypass any password or pattern you once had put on your Phone. Just remember, you need to have a stable internet connection in order for the step to work seamlessly.

Bonus Tip: Are There Preventive Measures To Avoid Future Lockouts?

Want to prevent future lockouts and ensure a smoother smartphone experience? Consider implementing the following preventive measures:

1. Setting Up Alternative Lock Methods

One way to avoid getting locked out of your Tecno Spark 20 Pro phone is to set up alternative lock methods. In addition to PINs, passwords, and patterns, you can use biometric methods. These include fingerprint recognition or facial recognition if your device supports them. Such options provide convenient and secure ways to unlock your phone.

2. Regularly Backing Up Your Data

Regular data backups are crucial to safeguarding your essential files and information. Utilize cloud backup services or local backup solutions to routinely save your data. In case of a lockout or a factory reset, you can quickly restore your data without loss.

3. Using Secure and Memorable Passwords

When setting up lock methods, opt for strong, unique, and memorable passwords. Avoid using easily guessable information like birthdays or simple patterns. Strong passwords can enhance security while minimizing the chances of forgetting your credentials.

Conclusion

There is no point in arguing that looking through how to reset a Tecno Spark 20 Pro phone that is locked after you have forgotten the password is indeed a hectic process. But, there is a way around it too. By going through all the steps mentioned above, you can always get an unlocked phone with ease.

To our recommendation, we would suggest going through Dr.Fone - Screen Unlock (Android) so that you can make the entire process as seamless as possible. It is by far the easiest and most convenient process to work around. Neither less to say, there are a ton of video tutorials that can assist you in case you get stuck in the middle of the process.

Full Tutorial to Bypass Your Tecno Spark 20 Pro Face Lock?

Your android phone face unlock may be buggy, or the camera may be damaged. It can’t recognize your face. When you try multiple times in such cases, it will lock your device permanently. Are you stuck with a locked phone? And you’re still confused about what just happened. Face unlock may face problems such as

• Face unlock app may be buggy
• Your face unlock settings may be unstable
• Your phone camera or face unlock sensor may be damaged
• Someone else may have registered their face without your permission

Whatever the reason, they are equally big obstacles for you to use your phone as usual; trying to unlock your device can lead to a permanently locked phone. So how do you bypass face unlock?

Follow the guide below to bypass the face unlock settings and choose the best one for yourself.

How To Bypass Android Face Lock by Ourselves?

If you want to bypass face lock by yourself, then different methods can help you. These are all tested and work well.

1. A Picture Possibly Bypasses Face Lock

You can use your photo to manipulate the face lock app. Simply use your photo to unlock the phone, which should work fine. If your phone doesn’t recognize your face from a photo, try again.

If it still doesn’t recognize your face, try a different photo or even change the camera’s lighting settings or the angles to see if that helps.

Anyway, this method is still unstable because of many uncontrollable factors. If everything fails, consider the following methods to bypass the face lock.

2. Hard Reset your phone

To get around the Android lock screen, perform a factory reset. While resetting your phone allows you to set a new password, it also erases all data from your device. This method works like a charm, but it also requires more technical knowledge. To bypass screen lock via factory reset, follow these steps.

Step 1: Turn off your phone and hold the Power and Volume-down buttons simultaneously until the recovery mode screen appears. There are minor variations depending on the brand and model.

Step 2: Select the Wipe data/Factory Reset option using the volume buttons. To confirm the option, press the Power button.

Step 3: Choose Yes > Delete All User Data, then press the power button to continue. When the process is complete, turn on your phone.

So, before facing such awkward cases, like data loss, we suggest you have a backup habit of keeping your data safe.

3. Google Find My Device

Google Find My Device is a service that lets you remotely lock, track, and wipe data from stolen or lost phones. With a Google account and the password, it won’t be complicated to remove any locks on your phone. You can bypass the Android lock screen by following the steps below:

Step 1: Navigate to Find My Device and sign in with your Google account.

Step 2: Your phone receives a notification.

Step 3: Select Erase Device, confirm, and click Erase as a warning pops up on the screen.

Step 4: The factory reset process on your phone begins. When it’s finished, choose My Google Account instead of using your phone as if it were brand new.

Just like the hard reset, after using Google Find My Device, all your data and settings will be erased. Please make everything well prepared before you decide to unlock your device.

Easiest Way to Unlock Your Android Face Recognition Using Dr.Fone-Screen unlock

The methods mentioned above may be hard for you, and you don’t know any technical skills. If you are looking for an easy tool that can face unlocking for you, then Dr.Fone - Screen Unlock is all you need.

Dr.Fone by Wondershare has many useful tools, and Screen Unlock is one of them. It is the easiest and safest method to bypass the Android face lock. It is safe, secure, and easy to use.

The following guide explains how to use Dr.Fone-Screen unlock to bypass the Android face lock.

Step 1: Install and open Dr.Fone on your computer

Step 2: Run Dr.Fone on your PC and select “Screen Unlock” from the tools

Step 3: Select Unlock Android Screen

Please select” Unlock Android Screen” for the rest process.

Step 4: Select device model

Please click the button fitting your phone.

When arriving at this page, we have a lot of options to unlock your device screen for most phone brands, like Samsung, Nokia, LG, OPPO, etc.

Step 5: Enter into Recovery Mode

Here are examples of Samsung phones via its Recovery Mode to unlock your Android device screen.

(Recovery Mode When the Samsung phone with Bixby)

(Recovery Mode When the Samsung phone without Bixby)

(Recovery Mode When the Samsung phone with Home button)

Step 6: Instructions to Wipe Cache Partition

This step in Recovery Mode is the most important to unlock your screen. Please click the buttons as instruction.

Now you can see your device is unlocked successfully

Conclusion

There are various methods to bypass Android face lock, but Dr.Fone-Screen Unlock is the easiest and safest method. Dr.Fone offers Screen Unlock and many other handy tools to help you recover, remove and unlock your Android phone without geeky knowledge. Dr.Fone-Screen Unlock is a step-by-step process, and you do not need to do anything; Dr.Fone will do all you want to do on your phone!

Also read: